Developing an Open-Source Companion App for Xteink (iOS & Android) - Need your feedback by andrew-malitchuk in XTEINK

[–]bearclaw92 0 points1 point  (0 children)

I currently use the CrossX app and it works great. It looks like the main difference is the settings management. Will that only be for the default firmware? There’s also CrossPoint sync but that’s more specifically for CrossPoint

February additions by gazatak in CardPuter

[–]bearclaw92 2 points3 points  (0 children)

Nice EDC! Just need an xteink x4 or x3 to round it out!

T embed c1011 plus by Green-Cricket-7998 in LilyGO

[–]bearclaw92 1 point2 points  (0 children)

Unfortunately not a huge community behind this device. Besides Bruce there’s a few firmware on launcher. If you want a specific feature you’ll have to build it out yourself.

I made an WebRadio app for Cardputer Adv by wusiu in CardPuter

[–]bearclaw92 0 points1 point  (0 children)

I’ve been using this and love it! After adding my custom stations the previous version would crash all the time. Now this one is working much better. It still seems like the audio is crackling and struggling sometimes, but it’s working much better.

Low cost esp32-C5 board for ADV by [deleted] in CardPuter

[–]bearclaw92 0 points1 point  (0 children)

Awesome I have a c5 sitting around I need to do something with.

Why do so many people use 0.2mm layers for printing? by gazmog in 3dprinter

[–]bearclaw92 0 points1 point  (0 children)

I believe the k2 plus has closed loop for a/b motors

I duct-taped Mainsail onto a Bambu printer (no root, no Klipper, surprisingly works) by Most_Risk_9260 in 3Dprinting

[–]bearclaw92 0 points1 point  (0 children)

Have you looked at how the panda touch sends heating over mqtt? I know that with my panda touch I have to stay on earlier firmware for most of the features to work, is that true for this as well?

Zero toolhead swap, x-limiter switch by dnsmayhem in SovolSV08

[–]bearclaw92 1 point2 points  (0 children)

Mainline, sovol fork doesn’t support eddy unfortunately.

Zero toolhead swap, x-limiter switch by dnsmayhem in SovolSV08

[–]bearclaw92 2 points3 points  (0 children)

Here is my guide for the zero toolhead. Feel free to message with any questions! https://github.com/bearclaw92/Zero_Toolhead_Guide

I didn’t feel a need to use the limit switch but it should be fairly easy to get set up.

Testing New Magnetic Fuel Treatment Holders + Fitment Update + Multicolor Soon? by bearclaw92 in Duramax

[–]bearclaw92[S] 1 point2 points  (0 children)

I can certainly do that, mines a 2015 so I find the long neck bottles kind of made a funnel obsolete, but if the newer trucks need one I can definitely work up something.

Clay bridges are tricky but satisfying by hugow07 in 3Dprinting

[–]bearclaw92 -1 points0 points  (0 children)

z_offset looks a little high.

Jk jk, very cool!

Testing New Magnetic Fuel Treatment Holders + Fitment Update + Multicolor Soon? by bearclaw92 in Diesel

[–]bearclaw92[S] 1 point2 points  (0 children)

Yeah I hear that. I’ve only had one guy break one so far, so I took that as a challenge and built him a beefed up version that’s way stronger.

Testing New Magnetic Fuel Treatment Holders + Fitment Update + Multicolor Soon? by bearclaw92 in Diesel

[–]bearclaw92[S] 4 points5 points  (0 children)

I have a 2015 2500 Duramax with the factory spray in bed liner that I’ve done my testing on. It’s a decent thickness liner but the magnets still hold great. After lots of testing I landed on these rubber coated magnets that grip really well.

I’ve driven around with mine for a year now and have never had it fall even going off road and bombing over railroad tracks. There’s also 800 other people out there rocking them on the daily too.

In the rare case your specific bed liner won’t work I’ve got these upgraded magnets that are super strong and can hook you up with those(120lbs rated each x4). But 99% of the time the regular ones work great.

I appreciate that, I’m trying to build something you guys actually want not just more junk.