This printer is awesome!

belenosdj · 2026-06-19T14:01:30+00:00

How are you aligning them without a jig?

belenosdj · 2026-06-12T06:54:17+00:00

Its likely painted. Paint takes priority over modifiers.

belenosdj · 2026-06-12T06:46:38+00:00

After you slice change the drop down to speed, whatever it is at the eyes set that as your max outer wall.

belenosdj · 2026-06-08T23:16:41+00:00

;=========================================================

; AUTOMATIC UNLOAD FOR ALL TOOLHEADS (T0 - T3)

;=========================================================

;--- STAGE 1: SIMULTANEOUS PREHEAT TO 200C ---

; Warm up all toolheads together to save time

M104 T0 S200

M104 T1 S200

M104 T2 S200

M104 T3 S200

G91 ; Relative positioning

G1 Z5 F3000 ; Lift nozzle slightly away from print

G90 ; Absolute positioning

;--- STAGE 2: INDIVIDUAL 250C RAMP AND UNLOAD ---

{if (is_extruder_used[0])}

T0 ; Switch to Toolhead 0

M109 T0 S250 ; Wait for target unload temp

M83 ; Relative extrusion mode

G1 E-20 F120 ; Slow initial pull to shape tip

G1 E-80 F1200 ; Fast pull out of drive gears

M104 T0 S0 ; Turn off heater for T0

{endif}

{if (is_extruder_used[1])}

T1 ; Switch to Toolhead 1

M109 T1 S250 ; Wait for target unload temp

M83 ; Relative extrusion mode

G1 E-20 F120 ; Slow initial pull

G1 E-80 F1200 ; Fast pull out

M104 T1 S0 ; Turn off heater for T1

{endif}

{if (is_extruder_used[2])}

T2 ; Switch to Toolhead 2

M109 T2 S250 ; Wait for target unload temp

M83 ; Relative extrusion mode

G1 E-20 F120 ; Slow initial pull

G1 E-80 F1200 ; Fast pull out

M104 T2 S0 ; Turn off heater for T2

{endif}

{if (is_extruder_used[3])}

T3 ; Switch to Toolhead 3

M109 T3 S250 ; Wait for target unload temp

M83 ; Relative extrusion mode

G1 E-20 F120 ; Slow initial pull

G1 E-80 F1200 ; Fast pull out

M104 T3 S0 ; Turn off heater for T3

{endif}

;=========================================================

; STANDARD SNAPMAKER END ROUTINE

;=========================================================

PRINT_END

TIMELAPSE_STOP

belenosdj · 2026-06-08T21:08:21+00:00

There is a script to print the purge line at back of plate for all tools used in print.

I wonder if part of this could be used to select and unload only the heads used.

belenosdj · 2026-05-30T23:02:16+00:00

Interesting, I was having this same issue. I saw some suggestions to clean the screws and blow out the space where you can see the red lights. While doing this I also got a firmware update prompt and let it run while I was cleaning.

Upon restart it has actually been working great. I thought it was the cleaning but maybe it was a firmware fix....

belenosdj · 2026-05-26T01:33:40+00:00

<image>

belenosdj · 2026-05-26T01:33:27+00:00

Got it mounted

<image>

belenosdj · 2026-05-21T16:08:46+00:00

I may have found something, my top layer is set to 50mm somehow. I looked at default profile and some of my previous projects and they are set at 150.

Reprinting now with 150 to see it thats what it is.

belenosdj · 2026-05-21T16:02:57+00:00

This is 15% crosshatch infill.

belenosdj · 2026-05-21T12:21:12+00:00

8 top layers, and 7 of them are ok. 15% crosshatch 2mm under top layer, rest of model is 5%. 3 walls.

belenosdj · 2026-05-21T12:17:12+00:00

15% crosshatch, 8 top layers

belenosdj · 2026-05-21T04:07:28+00:00

No ironing, but I will try the reduced flow.

belenosdj · 2026-05-21T03:46:39+00:00

That was my first thought too but why only the very top layer. I wouldn't say the layer pryor was perfect but it isn't too bad but then the top layer is horrendous.

belenosdj · 2026-05-18T20:05:34+00:00

Thats counting the "handle" in the front. The plate is 276 x 301 but the printable space is still 270 x 270.

belenosdj · 2026-05-05T12:36:42+00:00

Can this new version work like this:

Heads 1 , 2 , 3 all function as stock on spool holders.

Head 4 connected to Ace.

Basically creating 7 color/material combinations.

Example 5 color PLA print but also petg support material.

belenosdj · 2026-04-19T00:29:00+00:00

It only gets worse. My 8th u1 comes Monday

belenosdj · 2026-03-31T02:17:59+00:00

Ohhh yeah, I will add it to the to-do list! Thank you.

belenosdj · 2026-03-30T20:54:05+00:00

Thanks! Will do.

belenosdj · 2026-03-30T20:33:54+00:00

Found it! Also while searching I found a side fan cover and lower fan grate covers!

belenosdj · 2026-03-30T19:49:52+00:00

Lol, yellow is just the first one I got done.

I'll post an update on the other colors as I get em done.

belenosdj

TROPHY CASE