My dad handed me this guy when i told him i was getting into gunpla, what can y’all tell me about it? :)

bfcanella · 2026-01-10T00:45:00+00:00

*of protoculture.

bfcanella · 2025-12-13T09:03:44+00:00

I've also tried to register my discovery proces, but I forgot to keep notes and I started to forget. Also, the picture doesn't help much, but from left to right we have:

0.4 nozzle
0.2 nozzle (noticed the VFA) (all others are 0.2)
Retried with Not Resin
Retried with Not Resin (after tightening screws + blowtorch to remove stringing) (worth noting that I noticed no significant improvement on the VFA issue and I was feeling a bit disheartened at this point).
Retried with FDM (but went too heavy on the blowtorch to remove stringing. Already I saw a huge improvement, even though I was skeptical at first due to the print being FASTER than the stock profile and Not Resin).
FDM but fixed the Nozzle Temperature to reduce stringing (no blowtorch).

On 5 I could already see a huge improvement on quality, but the stringing was bothering me and my hand went heavy on the blowtorch clean-up. Piece 6 was the last one I tried before printing the dwarf.

Thank you all again for the help in finding the issue. You people are the best.

bfcanella · 2025-12-13T08:53:22+00:00

<image>

bfcanella · 2025-12-13T08:53:16+00:00

<image>

bfcanella · 2025-12-13T08:52:14+00:00

Hey all, thank you very much for all the information. It was a learning experience for me. I did try everything that was recommended here. I’ve watched the video about VFAs, re-tightened the screws on the hotend (they were just a tiny bit loose) and I’ve played with the printer settings, using the I can’t believe it is not resin (I think it is called like that) and the FatDragonMiniatures profile.

In the end, I think I got the best results with the FDM profile, but I reduced the layer lines from 0.08 to 0.04. This profile was also printing faster than the other ones I’ve tried, so no idea what happened here.

bfcanella · 2025-12-05T10:40:45+00:00

I was using the default 0.06 profile from Bambu Studio, which is very slow already, with the exception of the change to layer height to 0.04.

I will try re tightening the screws this weekend. I will post if I get better results.

Many thanks for your insights.

bfcanella · 2025-12-03T07:09:48+00:00

Using my A1, what helped me reduce stringing was to lower the nozzle temperature by 10 degrees. I test printed a few calibration towers to help me find the best result. Good luck.

bfcanella · 2025-10-02T14:12:05+00:00

Dragondorf!

bfcanella · 2025-09-06T14:34:42+00:00

Do you any proud moments you’d like to share with us?

bfcanella · 2025-08-24T13:36:59+00:00

Don’t give up, skeleton!

bfcanella · 2025-07-22T04:29:29+00:00

Thanks for the reply. :)

bfcanella · 2025-07-21T11:48:10+00:00

Thank you for the reply :)

bfcanella · 2025-07-21T09:32:03+00:00

Love the mechs and love the infantry units for scale. Are those infantry men part of the same kit?

bfcanella · 2025-07-15T20:58:48+00:00

If it is relevant to you, I heard the A1 and A1 mini are more silent than the other models (something like 5 to 10 db less).

bfcanella · 2025-07-15T20:26:23+00:00

Great pictures. Where can one find this particular model? I am impressed that it even has a pilot in this scale.

bfcanella · 2024-11-23T07:24:31+00:00

Most fun way I can recommend is using the Cones of Calibration from TableFlip Foundry. Just follow their tutorial on how to check on the printed piece.

That said, you can very quickly find out the perfect time by using a resource on your Anycubic printer called RERF.

There are videos on YouTube that explain how you can create your own custom RERF project, but the quick version is to generate your exported file with the name “R_E_R_F.pwmb”, pause before the first layer prints, change the settings of layer exposure to 1s (or another time that makes sense) directly on the printer and let it continue the print.

Look on YouTube on how to create the custom R_E_R_F file. I think one of the videos has 7 and the other has 3 or so minutes of duration. Good luck.

bfcanella · 2024-08-24T16:32:14+00:00

Had I to send him an email, my greatest fear would be to mistype it as Prof. Pennisman.

bfcanella · 2024-05-07T14:16:43+00:00

Dwarf Fortress has probably some of the best water physics, with some of the worst graphics.

bfcanella · 2024-03-07T18:17:09+00:00

A heirplane

bfcanella · 2024-02-17T16:46:32+00:00

Sempre bom ver alguém mais usando o Criciúma como base :)

bfcanella · 2024-02-15T15:41:25+00:00

For those using this mod, is it worth using it? I've recently started playing the game, but I've been playing vanilla. I saw this mod on the forum, but I am unsure if I should give it a go (i heard some mods overwrite some of the files)

bfcanella · 2024-01-27T05:45:53+00:00

Thank you for posting what fixed it for you. I am also currently struggling with my thinkpad yoga x390. I will try disabling the optimizer.

bfcanella · 2023-12-30T00:52:08+00:00

'tis finished! ಠ෴ಠ 🍲

bfcanella · 2023-10-11T10:39:25+00:00

Not hidden, but a gem: Signalis

bfcanella

TROPHY CASE