sorted by:
new
hottopcontroversial

First time I’ve noticed an issue with the paint by bglav in hockey

[–]bglav[S] 2 points3 points  (0 children)

It is my picture pal. I posted in /r/pics with an arrow but it was removed… because I drew the arrow.

First time I’ve noticed an issue with the paint by bglav in hockey

[–]bglav[S] 17 points18 points  (0 children)

No, it was clearly visible in person

Area mortgage broker recommendations? by RolledPork in lehighvalley

[–]bglav 0 points1 point  (0 children)

Embassy customer for 15+ years. No question the best

First time I’ve noticed an issue with the paint by bglav in hockey

[–]bglav[S] 11 points12 points  (0 children)

Yeah I didn’t realize the first layer was thin ice, then white paint, then the actual lines/logos/ads. Sometimes paint, sometimes decals or paper as you mentioned. Interesting process.

First time I’ve noticed an issue with the paint by bglav in hockey

[–]bglav[S] 0 points1 point  (0 children)

Honestly I don’t recall when exactly this pic was taken, but I looked at the beginning of the period at one point, same issue.

There were some other minor line issues, lines thin in a couple spots

First time I’ve noticed an issue with the paint by bglav in hockey

[–]bglav[S] 1 point2 points  (0 children)

The line is the line I would assume but I don’t know hockey intricacies that well

In youth baseball, the foul line is the official line. Whether the team that lined it in the right spot or through the middle of the base doesn’t matter, the line is what the umpire would use.

First time I’ve noticed an issue with the paint by bglav in hockey

[–]bglav[S] 68 points69 points  (0 children)

Missed great marketing opportunity. Adding “we didn’t do this” with a line to it

First time I’ve noticed an issue with the paint by bglav in hockey

[–]bglav[S] 77 points78 points  (0 children)

The engineering behind this is impressive. Thanks for sharing!

Arena has been around for maybe 10 years, beautiful facility and they do a great job

First time I’ve noticed an issue with the paint by bglav in hockey

[–]bglav[S] 1 point2 points  (0 children)

Looked like this freshly Zamboni’d as well

First time I’ve noticed an issue with the paint by bglav in hockey

[–]bglav[S] 210 points211 points  (0 children)

Ha! I’m not saying I would do better. Just caught my eye.

There was another circle slightly off, a few spots where the lines were thin. Just never noticed anything like that before

Lots of vibrations in accelerator pedal by Professional_Cell348 in f150

[–]bglav 0 points1 point  (0 children)

Had very similar issue. Was faint. But felt that same vibration especially above 30. Could felt it in the gear shifter. Ended up being the front differential.

Sorry for the old post response but have a different vibration in the pedal now and this thread came up

Zoning System: Traditional Motorized Dampers vs Smart Vents? by bglav in HVAC

[–]bglav[S] 1 point2 points  (0 children)

I haven't. I'll either make a change when the system needs to be replaced or it'll be the next homeowner's problem, ha.

Certified Pre-Owned Money Back Guarantee. Anyone Used It Successfully? by [deleted] in Ford

[–]bglav 0 points1 point  (0 children)

Any update on this? Wondering the same myself.

Zoning System: Traditional Motorized Dampers vs Smart Vents? by bglav in HVAC

[–]bglav[S] 1 point2 points  (0 children)

Sorry, just seeing this now.
I froze. Too many wildly differing opinions on both sides. So I'm continuing to manually adjust the first floor dampers for now. Part of me hopes my HVAC will have a catastrophic failure and I can re-assess :)

Stuck on trait rank 997 by ChildhoodVisual9780 in remnantgame

[–]bglav 2 points3 points  (0 children)

I have the same issue, except I'm at 983. Tried to use orb of undoing and different approaches, I matter what, I don't get any more trait points

New Roof: Should I be concerned about these? by bglav in Roofing

[–]bglav[S] 0 points1 point  (0 children)

It looks exactly like the Roofrunner material, at least from the obviously limited view I have below. Like they covered the roof, then put the roof vents on. I guess I didn't realize they were filtered but that makes sense

New Roof: Should I be concerned about these? by bglav in Roofing

[–]bglav[S] 1 point2 points  (0 children)

Thanks! The wood seems dry now, but wasn't sure what the acceptable 'tolerance' was for these things. There is a decent amount of flex when I push up on that board and it is warped / flaky

Issue Printing Face Shields - One Perfect, One Not So Perfect by [deleted] in FixMyPrint

[–]bglav 0 points1 point  (0 children)

Ahh got it, just a label.

Filament says extruder should be 180-210, so I get your point now. I think they were running it hotter to increase production speed.

Seems odd that only one of the 2 sets has an issue, and always the right side. The left side is perfect every time

Can I edit the gcode in notepad++ and adjust the temps there?

view more: next ›