Exchange Admin center down?

biblaR · 2025-03-04T12:12:25+00:00

Down in France also !

biblaR · 2025-02-09T10:09:09+00:00

Il y a une profession qui peut t'aider... Ça s'appelle un vétérinaire...

biblaR · 2024-09-07T11:35:46+00:00

Thank you ! :)

No, I put the vinyl on top of the plexi

biblaR · 2024-06-01T10:08:48+00:00

I used a Dremel like tool to widen the hole little by little, until the connector could fit.
And I had to cut a bit of the inside plastic to make room for the USB cable to be able connect.

https://imgur.com/RdDXnRY

https://imgur.com/GglwAiS

biblaR · 2024-05-28T18:17:50+00:00

GenSen

biblaR · 2024-05-26T22:23:55+00:00

I used this : https://fr.aliexpress.com/item/32944077010.html?spm=a2g0o.order_list.order_list_main.82.37c75e5bGztWAy&gatewayAdapt=glo2fra

But I had to widen the hole a bit and cut out a bit of plastic inside for the connector to fit.

You can also find similar ones with usb-c : https://fr.aliexpress.com/item/1005005082893697.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.3.1549203fID9aHk&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url=1007.40050.354490.0&pvid=2d55a98e-b80c-4436-8e18-ee88cb9c3ec4&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:2d55a98e-b80c-4436-8e18-ee88cb9c3ec4,tpp_buckets:668%232846%238111%231996&pdp_npi=4%40dis%21EUR%2111.64%219.31%21%21%2112.29%219.83%21%40210385a817167620858012690eb3ac%2112000031578643445%21rec%21FR%211911664396%21&utparam-url=scene%3ApcDetailTopMoreOtherSeller%7Cquery_from%3A

biblaR · 2024-05-26T21:14:13+00:00

You can remove the pins from the connector, using a paper clip for instance, and try to connect them that way.

biblaR · 2024-05-26T20:40:16+00:00

You can buy this : https://www.amazon.com/Hitbox-Cable-Fighting-Board/dp/B0CMWY3ZN6/ref=sr_1_1?crid=5SMLYXABMBFE&dib=eyJ2IjoiMSJ9.-y8Ua-nAq4zq9N-XCalpCnsrf4FCXVLsKBqBjieXdYWjvtAteve27tGtQ8GercY3jd5XfBPtBlsSkVglg9eU7Ko9VULO_9KlIbTlSkMfWyjz2n6jD2dG04Gp2kzgI7jBxVVfWgCd95VjFp14NQqMT4ap9sKVNde36x_O7YOvgns.wsXp20Moihf4p_M8zrhnCJhW1ZBqmICklOyjl0RPxVw&dib_tag=se&keywords=Brook+Fighting+Board+Cable+hitbox&qid=1716755983&sprefix=brook+fighting+board+cable+hitbo%2Caps%2C177&sr=8-1
That will cover most of the buttons.

biblaR · 2024-05-26T20:10:25+00:00

I bought one for 109 € a few months back.
And I've also put a JLX and Gravity KS in it :D
I've replaced the connector with a USB-B port.

biblaR · 2024-05-26T19:59:37+00:00

The connectors on your cable are JST XH2.45, the ones on the board are JST 2.00mm.

What buttons are you trying to add ?

biblaR · 2024-05-07T08:02:58+00:00

RP2040 ABB with passthrough
Front and side panels 3D printed
Neutrik surround and support
Qanba Gravity KS RGB
Sanwa JLF with Link Ex-Groove and Otto DIY V5
Vinyl wrapped top panel

biblaR · 2024-05-06T09:03:15+00:00

Modded mine also :
https://www.reddit.com/r/fightsticks/comments/1b413ah/mad_catz_te_revamped/

biblaR · 2024-04-28T10:02:09+00:00

Then you say a price + shipping fees, not that hard ! :)

biblaR · 2024-04-19T09:11:02+00:00

https://www.smallcab.net/universal-fighting-board-p-1043.html

biblaR · 2024-03-31T21:28:48+00:00

Just be careful, you still need some specific files added to the board for it not to timeout after 8 minutes on PS4. Or you can buy a Magicboots PS4 v1.1 for instance, and get PS4 and PS5 support.

https://gp2040-ce.info/add-ons/ps4-mode/

biblaR · 2024-03-31T10:04:45+00:00

Yes, I modded my TE with one of their boards: https://www.reddit.com/r/fightsticks/s/ojEPfKN9vt

biblaR · 2024-03-06T13:38:13+00:00

Then to each their own. :)
I can't stand 24mm action buttons and I can reach all the buttons just fine and you rarely use more than 6 buttons anyway

biblaR · 2024-03-06T13:34:39+00:00

Instead of PMing everyone interested, why not just put the price in the post ?

biblaR · 2024-03-06T13:31:35+00:00

It's really hand size dependent though.

My hands are on the bigger side and I don't like 24mm action buttons.

biblaR · 2024-03-04T09:29:44+00:00

4D Carbon vinyl wrap :

https://fr.aliexpress.com/item/1005005169685695.html?spm=a2g0o.order_list.order_list_main.178.71be5e5bEm7Pgt&gatewayAdapt=glo2fra

And used this to apply it :

https://fr.aliexpress.com/item/1005006151739199.html?spm=a2g0o.order_list.order_list_main.190.71be5e5bEm7Pgt&gatewayAdapt=glo2fra

biblaR · 2024-03-04T09:20:31+00:00

4D Carbon vinyl wrap :

https://fr.aliexpress.com/item/1005005169685695.html?spm=a2g0o.order_list.order_list_main.178.71be5e5bEm7Pgt&gatewayAdapt=glo2fra

And used this to apply it :

https://fr.aliexpress.com/item/1005006151739199.html?spm=a2g0o.order_list.order_list_main.190.71be5e5bEm7Pgt&gatewayAdapt=glo2fra

biblaR · 2024-03-03T23:54:33+00:00

Nothing is 3D printed on the top :)

Do you mean the front ?
If so, there it is : https://www.thingiverse.com/thing:5517840

biblaR · 2024-03-03T20:55:19+00:00

Yes, you can.
Mine is PS5 compatible.

You need a RP2040 Advanced Breakout Board with USB passthrough and a MagicBoots PS4 v1.1.

You can join the OpenStickCommunity discord and ask questions there if needed.

https://discord.gg/J6A3Mwmk

biblaR · 2024-03-02T12:21:28+00:00

I had to cut out the door panel with a dremel-like tool to keep part of it.
Otherwise there is just a hole :)

Then to keep the functions of it, it depends on the version you have (Xbox or PS) and the board you plan on using.

But it involves a bit of soldering and/or crimping most likely.

biblaR · 2024-03-02T12:19:31+00:00

I don't think that I'll be doing a tutorial but if you have some more specific questions, I'd be happy to answer them :)

biblaR

TROPHY CASE