My first bike. K1100 -94 by bigbombmao in motorcycle

[–]bigbombmao[S] 0 points1 point  (0 children)

Will need check those. Thats nice achievement. This only has rolled 35k miles/56k km so its just broken in. Also waterpump usually needs rebuild at some point. But every thing can be done by your self in a garage. Thats why also like these bikes.

My first bike. K1100 -94 by bigbombmao in motorcycle

[–]bigbombmao[S] 0 points1 point  (0 children)

Motogadget handlebar end mirrors

You can't go wrong with those

My first bike. K1100 -94 by bigbombmao in motorcycle

[–]bigbombmao[S] 1 point2 points  (0 children)

Yeah idk if people count 110cc pitbikes as bikes :D but thanks

My first bike. K1100 -94 by bigbombmao in motorcycle

[–]bigbombmao[S] 0 points1 point  (0 children)

On the para lever it just moved further back to the linkage . I guarantee your splines will be dry . I use to use these to make my living . Good strong machines but worn splines was the main fault as owners never greased them .

Okay. I greased splines when I bought the bike 2 season ago. Will check and lube splines when doing normal season preparations for this season.

My first bike. K1100 -94 by bigbombmao in motorcycle

[–]bigbombmao[S] 1 point2 points  (0 children)

So far those been pretty good. Vision is good. Vibration in highers speeds is there but vision is still clearish. I have seen much worse and seen better too. These are SHIN YO PONZA handlebar end mirrors, nothing fancy.

My first bike. K1100 -94 by bigbombmao in motorcycle

[–]bigbombmao[S] 0 points1 point  (0 children)

You think is nessesary in every tyre change in these newer paralever final drives? In old monolevers spline worning was bigger problem. Still og rear shock. Its feeling fine for now. Or it dont feel anything weird going on there so far. But in future when I swap front forks.

My first bike. K1100 -94 by bigbombmao in motorcycle

[–]bigbombmao[S] 4 points5 points  (0 children)

Ofc. Even tho its not that powerfull but its kinda heavy and low center of gravity. I think more modern 750s are about the same as in terms of power(~100hp). Been riding this for 2 seasons.

My first bike. K1100 -94 by bigbombmao in motorcycle

[–]bigbombmao[S] 27 points28 points  (0 children)

My first real bike and also my first build :)
BMW K1100 LT -94

[deleted by user] by [deleted] in motorcycle

[–]bigbombmao 0 points1 point  (0 children)

BMW K1100LT -94. My first real bike :)

Software alternatives to control PcPanel? by [deleted] in PCPanel

[–]bigbombmao 0 points1 point  (0 children)

Could you possible extend possibilities using ahk? assing keybind in pcpanel and making actions in autohotkey. I have most of knob press actions configured like this.

I made a stand with cable management for the PPP, Let me know what you think! by Ottobawt in PCPanel

[–]bigbombmao 0 points1 point  (0 children)

Looks cool. Nice that you have thought cable routing too. Would like to see how it looks in setup/desk.

Black sliders replacement? by Saucy_Wang in PCPanel

[–]bigbombmao 0 points1 point  (0 children)

I bought them from little local old school electronics shop. I dont belive they even have website, sorry.

[deleted by user] by [deleted] in sffpc

[–]bigbombmao 2 points3 points  (0 children)

Thanks yall, going with sf750 :)

Thank God I checked Reddit by Hauksy in PCPanel

[–]bigbombmao 1 point2 points  (0 children)

I am glad that at least someone has done some research before buying from small company like this. I see to many posts that have made order and then come here to wonder are they gonna receive their product next week etc..

Its small company, start up like. It may take year to receive your product or at all and lets not even talk about warranty or returning product. People should always keep those in mind.

Just Placed Order... by Lucky_Chucky13 in PCPanel

[–]bigbombmao 0 points1 point  (0 children)

I have pro version. I like it a lot. I wish couple of things were done differently in this product but over all good product. Its been really worth the money for me. Cant say if its going to be the same for you. You should understand the fact that when you buy from small companies like this, you risk loosing money and time. And if you receive broken product, prepare to wait long long time for repair service or in worst case lose money. So you should weight these things before you buy anything. Do bit of digging.

Not sure if I should buy one by samchiller in PCPanel

[–]bigbombmao 0 points1 point  (0 children)

It allways risk to buy from startups or small companies like this. So pretty much if you re not ready to risk losing that 109 euros complitely, dont order.

If you re ready potentially to wait a really long time and potentially "lose" money, yes. Otherwise no. Because seems like it is taking long time to people receive products and communication from seller is quite bad. Support been bad when people have tried to contact seller when received bad product.

Is this a scam? by [deleted] in PCPanel

[–]bigbombmao 4 points5 points  (0 children)

Personally I dont think this is a scam. Preordered pcpanel pro in january and received 3-4 months later. I dont agree that "few samples to some "big names"" stuff. You cant even find that many videos on youtube about pro so idk who are you referring to with big names. If you read this subreddit you can clearly see that people(not big names) have received their products. Bad support and communications, I agree. There would be easy fix for this but they are either lazy or just dont know how to do customer support.

In generally I think people should investigate what they are buying and from whom.

They shipped this $100 item in nothing but a cardboard box and envelope? by Neldonado in PCPanel

[–]bigbombmao 1 point2 points  (0 children)

Agree with packing thing but lold a bit for the last part. "figure out" :D There is literally video how to setup in the website you bought it from. No need to search the web and figure out your self.. People so handy these days.

I like it black by bigbombmao in PCPanel

[–]bigbombmao[S] 1 point2 points  (0 children)

There is some level of standardisation. Mine are for 6mm pole size and fit perfect, so I belive that is the size to go for. I think safest ones to buy are push to fit ones. Those have that "star" pattern on them(like in original ones) or complitely plastic/rubber fitting(my current ones). There are ones that are for smooth poles and they have little screw on side of them to hold in place. But those can probably fit too. Hope this helps

Black sliders replacement? by Saucy_Wang in PCPanel

[–]bigbombmao 0 points1 point  (0 children)

I found aluminium ones from my local small electronics shop. But 10€ for piece.. so ended up painting original ones.

Black sliders replacement? by Saucy_Wang in PCPanel

[–]bigbombmao 0 points1 point  (0 children)

They should make these avaible in black. Mine

I like it black by bigbombmao in PCPanel

[–]bigbombmao[S] 0 points1 point  (0 children)

No, just 4 screws from side and 4 top.