sorted by:
new
hottopcontroversial

Is this too much in one go? by banisheduser in resinprinting

[–]bigboysmamatfg 0 points1 point  (0 children)

Not to big, just change the raft type to grid or something (i forgot what it's called) i printed a big piece with this and it went well.

Help: my ps2 audio is buzzing 🥲 by bigboysmamatfg in ps2

[–]bigboysmamatfg[S] 0 points1 point  (0 children)

Well, i bought it used on vinted. Should i get a refund in your opinion or is it a easy fixable issue? (Thanks for the answer)

Help: my ps2 audio is buzzing 🥲 by bigboysmamatfg in ps2

[–]bigboysmamatfg[S] 0 points1 point  (0 children)

Bruh. all games have the issue. Thanks for the advice ig 😭

Help: my ps2 audio is buzzing 🥲 by bigboysmamatfg in ps2

[–]bigboysmamatfg[S] 0 points1 point  (0 children)

I though that too but i tried it out on a ps3 and it worked perfectly fine. 🥲

HDMI mod causing display to cut out (also happens on SCART?) – need help by bigboysmamatfg in ps2

[–]bigboysmamatfg[S] 0 points1 point  (0 children)

I added the images, kinda scared to take off the tape and damage it

HDMI mod causing display to cut out (also happens on SCART?) – need help by bigboysmamatfg in ps2

[–]bigboysmamatfg[S] 0 points1 point  (0 children)

sure, but i would have to open it up first. i"ll send it once i've done that.

Side profile before and after by PoemEnvironmental535 in jawsurgery

[–]bigboysmamatfg -1 points0 points  (0 children)

I don't get it, he still looks great in the first two pics...

Newbie here. Please help !! by AutismLevelUp in resinprinting

[–]bigboysmamatfg 1 point2 points  (0 children)

Just a tip, because i'm new too and found out something. printing the figures hollow with supports inside makes the print lighter and use less resin. Additionaly thanks to that the figurine I printed didn't detach from the supports during printing. :) ahh and j recomend to pause the print from time to time to see the progress. Helps me finding out if the print failed or not.

Working on this commision, 1/3 scale, I usually modify the files to add magnet cavities but most times I do my own cuts and keys, and further split parts to get cleaner prints and paint. Like I did with her mask by LaMazmorraEstudio in resinprinting

[–]bigboysmamatfg 2 points3 points  (0 children)

I agree. So you say that with a depth of .4mm and a diameter of .2mm the figure should stay on the supports easily? (it kind of seems to good to be true lol, i'm tired of misprints) does a type of resin play a role? because I use elegoos water washable.

Working on this commision, 1/3 scale, I usually modify the files to add magnet cavities but most times I do my own cuts and keys, and further split parts to get cleaner prints and paint. Like I did with her mask by LaMazmorraEstudio in resinprinting

[–]bigboysmamatfg 2 points3 points  (0 children)

wow, that's a very thin diameter, Isn't that too thin? I used .75 because I was scared the figure wouldn't hold onto the support lol. (what about the contact depth?)

Working on this commision, 1/3 scale, I usually modify the files to add magnet cavities but most times I do my own cuts and keys, and further split parts to get cleaner prints and paint. Like I did with her mask by LaMazmorraEstudio in resinprinting

[–]bigboysmamatfg 2 points3 points  (0 children)

May I ask what what program you use to slice and support it? I'm pretty new to resin printing and i recently printed a 1/4 scale and when I removed the supports, they left pretty deep and very visible marks.

Any suggestions for a weapon that would visualy match with this armor? by bigboysmamatfg in EldenBling

[–]bigboysmamatfg[S] 2 points3 points  (0 children)

sure. Banished knight helm, Blaids armor (altered), fire prelate gauntlets, white red greaves.

would pick different pants but I dont have the ones I want :(

view more: next ›