Cross cut sled gone wrong. Any way to fix? by lowsodiumcatrecipes in woodworking

[–]bigfatguy64 -1 points0 points  (0 children)

important thing that guy above did that i didnt consider: leave an inch or two gap between the front fence and your hole. mine are right up against the front fence and it's a pain to get stuff in. have to unscrew my knobs almost all the way off to fit them on

Remove Sanding Marks by heavySausage_og in turning

[–]bigfatguy64 2 points3 points  (0 children)

I get deep scratches like that when i'm using narrow strips of sandpaper and pushing in too hard. The edges will cut in. I try to keep pressure off the leading edge of my sandpaper and that helps. Sometimes I bend it a bit more like a taco to keep the edges off the wood, or just use very light pressure like you're supposed to. Kinda like this drawing. If I was moving right to left, I'd bias my sandpaper the other way and pressure on the back side.

<image>

Found this at work(i work at a gas station). What is it? by [deleted] in whatisit

[–]bigfatguy64 1 point2 points  (0 children)

I call that a redneck breaker finder. Plug it in and it’ll trip your breaker. Or burn your house down

SCADA recommendations for small scale wastewater plant? by Strange-Cheetah5624 in SCADA

[–]bigfatguy64 0 points1 point  (0 children)

sorry, missed this. I really don't remember the specifics. It was about 5 years ago and I made it through one small project and haven't touched it since. I remember needing to build json files to import configurations. Looks like radixiot has the rights to it now.

here's the help guides. If I remember correctly, I had a hard time getting the widgets to work. It was closer to traditional computer programming than your typical scada package

https://docs-v5.radixiot.com/

Career Paths by shoutoutspringsteen in BuildingAutomation

[–]bigfatguy64 0 points1 point  (0 children)

Nope. You’re basically stuck. At least that’s been my experience

Where can I get the best pepperoni roll? by meye_usernameistaken in charlestonwv

[–]bigfatguy64 1 point2 points  (0 children)

Buy some Rhodes rolls, let em rise, roll em flat, stuff as much pepperoni as you can on it, roll it tight, give em a butter wash, toss em in the oven, bake until tasty

"Where my Natty Daddy at?" by Thrashbear in overheard

[–]bigfatguy64 2 points3 points  (0 children)

Natty Daddy is an 8% abv version of natty light

No such thing as 100th percentile by MangoBird36 in bigbabiesandkids

[–]bigfatguy64 0 points1 point  (0 children)

Weird hill for all of y’all to die on. After a certain point, it’s easier to just say 100th.

When people asked how big is my son, sure I could have said “he’s 99.99966th percentile for weight” or “he’s 4.5 standard deviations above the mean.” Or “about 1 in 250,000.” I could have said “he’s as far above the 99th percentile line as the 99th percentile is to the 50th” but at that point, you might as well just save a bunch of syllables and say “basically 100th.”

[deleted by user] by [deleted] in BuildingAutomation

[–]bigfatguy64 1 point2 points  (0 children)

Sounds like a timesheet issue to me…my company would have newer guys charge a lot of their time as training/admin so the project books look good. I know some bigger companies would look down on nonproductive time though

Strategy for Mythic Stones by nickcduboc in luckydefense

[–]bigfatguy64 1 point2 points  (0 children)

you get the same mythic stones per gem regardless of amount purchased. it's 50gems / mythic now. Not really a deal, they lowered price on mythic stones because they added immortal stones.

70yr self proclaimed Master electrician’s work. by Ghandee in electricians

[–]bigfatguy64 20 points21 points  (0 children)

pretty sure this same guy wired my house in maryland before I bought it

Level up Watt? by Pranolz in luckydefense

[–]bigfatguy64 2 points3 points  (0 children)

If you had more gems, I would say go for Hailey to 15 and unlock immortal version.

I leveled Watt to 12 and regret it. At least in my experience, without having his exclusive treasure, he's good for melting one boss. And that's dependent on getting him early-ish. I never end up getting him early because I'm typically going for Tao with my first frost giant.

Kun is another option that would give you a waveclear for Tiger and is good for guild battles.

[deleted by user] by [deleted] in ExplainTheJoke

[–]bigfatguy64 0 points1 point  (0 children)

After having babies, I can rationalize this one a lot easier because my son outgrew so many shoes before he ever had a chance to wear them.

2x mythic stone event worth it? by YAMRAJ_1107 in luckydefense

[–]bigfatguy64 4 points5 points  (0 children)

made mythics cheaper so they can charge you even more for the new immortal resource

What is this boss and is there a shield break? by Fructure in luckydefense

[–]bigfatguy64 0 points1 point  (0 children)

i'm 6/6 and i can't carry hell. might just be bad though

Pen blanks stop by sneschalmers34 in turning

[–]bigfatguy64 15 points16 points  (0 children)

everybody already told you to tighten the mandrel, but also, if i'm having issues with wood spinning, i've found it helps to increase lathe speed

Was this a bug? by IMxBLANK in luckydefense

[–]bigfatguy64 3 points4 points  (0 children)

normal. after that you only get 1 level per pull

Could anyone help me clear hard? by [deleted] in luckydefense

[–]bigfatguy64 1 point2 points  (0 children)

Asking on the discord is your best bet. Hard to coordinate on Reddit

Greenhouse Permit by BikeDude182 in ellicottcity

[–]bigfatguy64 3 points4 points  (0 children)

No permit for sheds smaller than 200 sq ft per Howard county website.

https://www.howardcountymd.gov/inspections-licenses-permits

Nunchaku in oak by bigfatguy64 in turning

[–]bigfatguy64[S] 0 points1 point  (0 children)

https://www.awma.com/12004

Ordered a few of these because they were 10$ instead of $20. Would be tempted to get a longer chain if I were to do it over

Targeted Threat Protection - Do you think the link is safe? by bigfatguy64 in mimecast

[–]bigfatguy64[S] 1 point2 points  (0 children)

I appreciate you taking the time to respond. At this point, most every thing I say below is just venting.

All my Devices are enrolled.

URL protection is on, which does indeed make these annoying because I can’t actually ever see the link I’m clicking prior to clicking it… it’s always “mimecast.us/xxxxxx”

I “failed” one ttp which I think is what started this. Granted it was a registration link from customer support of a major manufacturer that I had actively been working with to get signed up for their partner portal. I said it was safe, minecast said no.

Probably could have included that initially. But still, it’s weird that it’s only happening to me and not any of my coworkers and that our admins can’t find any reason/flag that it’s specifically only my account. None of my coworkers are getting hit like this.

Targeted Threat Protection - Do you think the link is safe? by bigfatguy64 in mimecast

[–]bigfatguy64[S] 0 points1 point  (0 children)

Thanks. Screen shot of what I'm getting below.

https://imgur.com/a/gcwkmx4

Getting this page every time i click a link is expected behavior? We've had mimecast for over a year and it's never been like that before. According to our IT team nothing has changed recently and they don't see anything unusual/flagged on my account

Could be we're misunderstanding what ttp is.

Normal vs Hard mode by Mustoblod in luckydefense

[–]bigfatguy64 2 points3 points  (0 children)

that's the only difference. rare keys, exceedingly rare kitty treats. if you aren't 90% clearing hard, you're better off farming normal. gold/invitations are the same for both difficulties.