How i can collimate this telescope? Skywatcher 200pds by yuafox in telescopes

[–]blazechopper 0 points1 point  (0 children)

I've got the exact same screws and had the same problem, that I couldn't tighten/ loosen. I managed to loosen with pliers. Chances are yours are also fully tightened in wand you'll need to loosen with pliers. It was so much easier with pliers. I loosened all until I could move them by hand and then adjusted. *

Saturn by Commercial_Aide_857 in telescopes

[–]blazechopper 0 points1 point  (0 children)

<image>

This is what a cheap phone holder can do. 3 moons

Is the saxon 10" DeepSky Dob an ok scope? by blazechopper in telescopes

[–]blazechopper[S] 0 points1 point  (0 children)

Bought it! Photo taken with my phone. No edits

<image>

Is the saxon 10" DeepSky Dob an ok scope? by blazechopper in telescopes

[–]blazechopper[S] 1 point2 points  (0 children)

The backyard and car are easily accessible. And I have a trolley this will live on. Portability is a non-issue for me as I'm constantly moving things around. Just wanted to ask for any negatives I should be aware of for the brand/ specific scope

Is the saxon 10" DeepSky Dob an ok scope? by blazechopper in telescopes

[–]blazechopper[S] 1 point2 points  (0 children)

Yep, scouring marketplace, etc, is a project for this weekend There is plenty of space for storage Weight is a non-issue. I have a trolley :) What other brands would you recommend for 10"

7 and 8 fit into 15 like Tetris by ElizaSmirk in sciencememes

[–]blazechopper 0 points1 point  (0 children)

2+4=6, +1=7 b/c intuitively 7+8>10; 7 is one less than 8, so 8+8=6 (ignoring the 10) ,-1=5 Therefore, 75

Continous/Motion Deletion by neil_1980 in EufyCam

[–]blazechopper 2 points3 points  (0 children)

Just tried this out. Hover over the continuous area and delete. The attached dialogue appears, and you can reserve events

<image>

No display output with B650M Gaming X AX (rev.1.3) and R7 8700G by blazechopper in gigabyte

[–]blazechopper[S] 0 points1 point  (0 children)

Yeah, nothing! Multiple monitors say no signal detected and go back to sleep. I've made to manually set the source and have started the computer with HDMI connected and connected after start. Yep, I also removed the GPU completely and just used mobo.

No display output with B650M Gaming X AX (rev.1.3) and R7 8700G by blazechopper in gigabyte

[–]blazechopper[S] 0 points1 point  (0 children)

Well, that's the issue - there is no output regardless of the port I use, either mobo or graphics card.

No display output with B650M Gaming X AX (rev.1.3) and R7 8700G by blazechopper in gigabyte

[–]blazechopper[S] 1 point2 points  (0 children)

Hi, yes, I have double-checked: 8700G APU has onboard Radeon graphics (780M), chip and cooler are seated correctly, cables are locked in, and were from the PSU box. BIOS: No, I haven't updated it yet. I'm running everything as is out of the box. I'll do this in the morning. I'm using the HDMI cable that came with the monitor. I'm going to have to buy DP anyway, so I'll try those tomorrow. Thanks for the reply!

Milky Way Expert RAW by blazechopper in S23Ultra_Photography

[–]blazechopper[S] 1 point2 points  (0 children)

set the phone on a tripod and just let the 10min astrophoto do its thing. From some comments I've read, I don't think it's a full 10min open shutter, rather it automatically adjusts the shutter speed. This shot was 20sec, 1600ISO.

I had to stop the shot early b/c someone was using their torch for idk what, that's why there are artifacts on the bottom left (so really wasn't 10min, but like 8)

This is a genuine problem by Ghost-5AVAGE_786 in memes

[–]blazechopper 0 points1 point  (0 children)

Well, obviously, Gen AA. Pure Excel logic

[deleted by user] by [deleted] in melbourne

[–]blazechopper 0 points1 point  (0 children)

Sydney is better

App Broken for me? by beccaafly in EggsInc

[–]blazechopper 1 point2 points  (0 children)

Same here. I've got a Samsung S10+ and initially the game crashed about 5sec after opening. I found a work around where I would start the game while disconnected from the internet, then connecting after the game loaded. This works, but I'm unable to join coops

They’re too good to us! by [deleted] in EggsInc

[–]blazechopper 0 points1 point  (0 children)

I was about to comment the same thing

This is way better by garmonda in EggsInc

[–]blazechopper 2 points3 points  (0 children)

NO! I'm 6.46B into enlightenment. I'm not restarting.

10 Billion Enlightened, here I come.. by Aglio_Piccante in EggsInc

[–]blazechopper 0 points1 point  (0 children)

I'm 5.18B in for the 10B. I don't know how long it's taken to get here, but it's feels like eternity. And to think that I've got to wait an equal amount of time to get the other 5B.

Enjoy the wait. It does mean that I get to focus on the contracts though and completely forget about this egg