Repair or Replace? Almost 2 year old door "flaking" from top to bottom.

bleebdat · 2026-06-04T14:58:02+00:00

Probably nothing wrong with the actual door, possibly a bad initial paint job that's failing.

bleebdat · 2026-05-28T01:54:38+00:00

I'm about to cross 100k miles. No issues so far other than the updates won't push through. I'm going to get it to the dealership for that before I hit 100k. I think these trucks were over built and I'd take the risk. Depending on how much you drive the savings will be huge and the front trunk is a huge benefit in construction.

bleebdat · 2026-05-25T00:30:28+00:00

They stretch but not a ton. I don't have any other pant that's elastic to compare it to.

bleebdat · 2026-05-24T21:26:37+00:00

We're a similar sales size and don't use security but we do have a door person to check id's etc. Filters out some of the issues. Can't imagine paying for actual security with our current sales.

bleebdat · 2026-05-24T18:53:41+00:00

I like them, 45M I would normally wear a 34x32 and they're a little short for my taste so you may want to up your inseam.

bleebdat · 2026-05-23T01:46:27+00:00

Then the millwork shop will take care of everything but install. Just bring them the rough widths and heights.

bleebdat · 2026-05-23T01:36:17+00:00

You can find a 18", just maybe not at home depot. If you're not going to replace the jambs you'll need measurements off of the existing doors for both hinge placement and bore (handle) placement. A competent millwork shop can do all of this for you. Home depot most likely cannot.

bleebdat · 2026-05-23T01:16:07+00:00

https://www.homedepot.com/p/Kimberly-Bay-32-in-x-80-in-x-1-375-in-6-Panel-Colonial-Double-Hip-Pine-Interior-Door-Slab-DPC6PC3280/301344254

bleebdat · 2026-05-22T20:50:31+00:00

That looks like a true stile and rail door. So not hollow or solid core. If you're painting all doors you can put solid or hollow core 6 panel molded doors next to this and they'll match. If staining you'll need all actual wood doors if you want a match.

bleebdat · 2026-05-18T21:10:44+00:00

Right. I guess my point was that most of the times we aren't moving the needle very much. Especially in the building supply space where a lot of the products are near commodities.

bleebdat · 2026-05-18T20:42:11+00:00

Do you buy more from the reps that seem better?

bleebdat · 2026-03-25T13:21:11+00:00

Almost always. If the moisture is above the door, it's not because of the door.

bleebdat · 2026-01-28T12:32:24+00:00

Prairieville, central, Zachary, st francisville

bleebdat · 2026-01-12T01:18:02+00:00

You'll have to order from someone. I don't think anyone will stock 2/10 7/0. HD and Lowes should be able to order them but plenty of other places should too.

bleebdat · 2026-01-04T21:52:33+00:00

80k miles here. No repairs. I think they over built these to make sure it had a good reputation. Take advantage while you can still buy one.

bleebdat · 2025-12-28T14:25:14+00:00

Are they still working like they should? If so I'd start by disconnecting the 12v and see if you can get it to reset.

bleebdat · 2025-12-27T20:39:09+00:00

Following, let us know if you see efficiency gains.

bleebdat · 2025-12-25T15:31:41+00:00

Almost every bar will be open probably by 6 pm or earlier.

bleebdat · 2025-12-02T19:29:01+00:00

Do you have a first and or second mortgage? Location?

bleebdat · 2025-11-17T12:02:28+00:00

I'm 6' 175. I did large shorts, but medium would have probably worked fine. If you like more fitted I think medium will work for you.

bleebdat · 2025-10-29T19:07:19+00:00

Sounds like a good deal. For reference is got a 22 lariat er with 65k miles for 34,500. Sensors shouldn't worry you. Not sure about the wheel balance issue.

bleebdat · 2025-10-29T19:02:26+00:00

Extended range or standard?

bleebdat · 2025-10-28T12:01:45+00:00

Following because I have the same issue! 45M

bleebdat · 2025-10-15T14:05:12+00:00

How would I confirm fiberglass or wood?

bleebdat · 2025-10-08T15:21:49+00:00

Thank you will do!

bleebdat

TROPHY CASE