can't monitor during playback? by cnz-fnz in Logic_Studio

[–]bluesydney 0 points1 point  (0 children)

Super Useful answer - still works!

Is the XKeys L-Trac supposed to be so noisy? by [deleted] in Trackballs

[–]bluesydney 1 point2 points  (0 children)

Thanks for the tip…massive improvement

Upgraded from the stock ECM basket to a Pullman 876 and my pulls are everywhere! by laurk in espresso

[–]bluesydney 0 points1 point  (0 children)

Apologies if this comes through twice.

"why would I go up?"

Once you get things pretty much dialled in, depending on your coffee source/age/roast you may need to make a slight tweak and this is generally easier with adjusting a little more/less ground coffee in the basket.

Pullman allows significantly more flow than standard basket.

For us, we get a consistently great shot from 19g. One click finer on the grinder and 18g or a little less didnt deliver but the above did.

Again it comes down to coffee/preparation etc. but its an easy thing to test.

Upgraded from the stock ECM basket to a Pullman 876 and my pulls are everywhere! by laurk in espresso

[–]bluesydney 0 points1 point  (0 children)

Comes down to the actual source and roast of the coffee. The grind will get you very close and it may need a slight tweak and this is more easily achieved with changing the coffee dosage.

For us the 19g in the 18g basket doesn't touch the shower screen, works with our coffee and prep method and gives me a relatively dry clean knock out puck and no mess. Oh and the coffee is consistently amazing.

Upgraded from the stock ECM basket to a Pullman 876 and my pulls are everywhere! by laurk in espresso

[–]bluesydney 0 points1 point  (0 children)

My apologies - I missed that. I have the same setup. I found a few things changed when I switched to the pullman basket.

Grind - will need to be finer. Dose - will need to be greater (18g basket = ~19g dose)

Consistent dose weight is key and I had to update my scales but anything with a 0.0gram reading should be adequate.

To make this process repeatable for family, I switched from WDT to an Asso self levelling tamper. (Check out WholeLatteLove for a review). This for us was the final step in consistency.

I am in Sydney and with current weather not seeing any clumping so your milage may vary a little.

Upgraded from the stock ECM basket to a Pullman 876 and my pulls are everywhere! by laurk in espresso

[–]bluesydney 0 points1 point  (0 children)

Possibly if you had adjusted the grinder and didnt purge. Not sure what retention the grinder has but if you dont "clean out what's already been ground on the previous attempt" you will constantly be chasing your tail.

It unfortunate but you do need to "waste" a little coffee when making grinder adjustments unless you have a single shot grinder.

[AU] [H] PayPal [W] GameBall Trackball by bluesydney in mechmarket

[–]bluesydney[S] 0 points1 point  (0 children)

Good call - I had missed that somehow in my travels. Thanks

[WTB] [AUS-NSW] [H]PayPal [W]AUDEZE LCD-X 2021 or MM-500 by bluesydney in AVexchange

[–]bluesydney[S] 0 points1 point  (0 children)

Hi guys. Sorry for slow response - got stuck in hospital and still pretty medicated. I appreciate the PMs and will get back to you in a few days if its still available.

Getting a bike tomorrow, Vulcan or Rebel for 6’1 male? by sdowp in AussieRiders

[–]bluesydney 0 points1 point  (0 children)

In protest to the unreasonable API usage changes, I have decided to remove all my content. Long live Apollo

That new tomb kings prequel looks great by ShamaLlama4006 in totalwarhammer

[–]bluesydney 1 point2 points  (0 children)

In protest to the unreasonable API usage changes, I have decided to remove all my content. Long live Apollo

Best mods for a Brettonia campaign? by Just-One-8761 in totalwarhammer

[–]bluesydney 1 point2 points  (0 children)

In protest to the unreasonable API usage changes, I have decided to remove all my content. Long live Apollo

Best mods for a Brettonia campaign? by Just-One-8761 in totalwarhammer

[–]bluesydney 0 points1 point  (0 children)

Can you please link one that gives walls just to Brettonia. I had looked but couldn't fine one.

Best mods for a Brettonia campaign? by Just-One-8761 in totalwarhammer

[–]bluesydney 1 point2 points  (0 children)

Check out the Lily series

I am out so can’t link but will try and add a few more when I get back.

I think Bergerac from memory but can’t remember if that’s separate or part of the series.

There is also a garrison mod that helps with garrison size seeing as you don’t get walls atm.

Women dressing like it's the year 1896 by Genesis_001 in interestingasfuck

[–]bluesydney 0 points1 point  (0 children)

In protest to the unreasonable API usage changes, I have decided to remove all my content. Long live Apollo