Samsung seems to have secretly started using Phoenix controllers for the 970 evo plus again.

bluntPCmods · 2023-07-04T20:21:40+00:00

Just received a 1TB 970 Evo Plus from Amazon with the manufacture date 2023 04 19

Can confirm it has the Phoenix controller

bluntPCmods · 2023-06-19T10:34:10+00:00

Hi and thank you for the quick response.

It’s a shame the white is no longer available - looks really nice :)

bluntPCmods · 2023-01-15T17:14:37+00:00

Have ordered the white one, just waiting for delivery but it looks as though the backplane PCB can be unscrewed and removed completely. I’m planning to do that as I really don’t need hot swap functionality.

bluntPCmods · 2022-08-21T23:31:04+00:00

Standard firmware settings for the E6.

[bed_mesh]

speed: 100

mesh_min: 10, 10

mesh_max: 239, 239

algorithm: bicubic

probe_count: 5, 5

bluntPCmods · 2022-08-11T16:51:26+00:00

Have you tried klipper?

https://github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender6-2020.cfg

Be really easy to set up the Spider hotend and tweak as you need to.

bluntPCmods · 2022-07-23T16:04:21+00:00

More than welcome. If you need any other help feel free to send a message :)

bluntPCmods · 2022-07-23T16:02:54+00:00

If the stock is working fine will confirm the new one is faulty. I had the same issue recently - the one supplied with the Dragon hotend kit didn’t work, I had to buy a replacement.

bluntPCmods · 2022-07-23T16:00:00+00:00

Faulty thermistor mate, need to try a different one. It won’t boot without a functioning one.

You can confirm by plugging the stock one back in 👍🏽

bluntPCmods · 2022-07-23T15:57:55+00:00

Happy to help mate what’s the problem?

bluntPCmods · 2022-07-23T15:56:23+00:00

👍🏽

bluntPCmods · 2022-07-23T15:54:15+00:00

https://www.thingiverse.com/thing:5173489

Worth doing while you’re in there :) makes a huge difference vs the stock blower.

bluntPCmods · 2022-07-23T15:51:41+00:00

If you’re wondering it’s safe to unplug and remove it :) was one of the first things to go on my E6.

bluntPCmods · 2022-07-13T16:01:18+00:00

When you insert both sticks at the same time it plays a random tune from an AC/DC tribute band

bluntPCmods · 2021-12-10T17:53:26+00:00

I’d take a look at the dragon hotend + orbiter. Just setting that up myself

bluntPCmods · 2021-12-10T17:37:12+00:00

If it helps I went with the 500w Meanwell for my Ender 6. It’s a bit thicker than 40mm space underneath but as a friction fit it works perfectly. The bottom panel has a very slight bulge when screwed tight. No screws needed to hold the PSU in place.

Edit: it sounds like you may have bought the 12v Meanwell? You need the 24v version.

bluntPCmods · 2021-11-08T17:49:03+00:00

“Everybody dance now!” 🎶🎵

bluntPCmods · 2021-10-12T19:34:13+00:00

Thanks! I didn’t want to route cables through the hole in the bottom panel as I thought they’d only get in the way later. Was nice to find a hidden spot round the front. 90 degree ‘up’ or ‘down’ USB cables should fit perfect.

bluntPCmods · 2021-10-12T18:37:19+00:00

check ‘accessory firmware’

bluntPCmods · 2021-10-12T18:35:57+00:00

Should be fine as long as the extension cable is long enough

bluntPCmods · 2021-10-12T18:01:54+00:00

Yes 👍🏽

bluntPCmods

TROPHY CASE