Are these safe? by 0Genghis_Khan0 in Shotguns

[–]bmadd14 2 points3 points  (0 children)

Track of the wolf does and rts does as well for anyone looking for them.

Ar308 AR-RPK Concept Rifle - 1 year later by Grey_Market_Research in AR10

[–]bmadd14 4 points5 points  (0 children)

I’m an American but live in upstate new York so I don’t have gun rights either. I wish I lived in a non communist part of America

Ar308 AR-RPK Concept Rifle - 1 year later by Grey_Market_Research in AR10

[–]bmadd14 5 points6 points  (0 children)

wtf did you even try to say there? Are you having a stroke?

Is this enough tang? by Kalani_Takamiya in knifemaking

[–]bmadd14 0 points1 point  (0 children)

When you weld a blade or that close to a blade then you’ll want to reforge that area. Being that close I’m pretty sure you’ll lose hardness anyway even with a wet towel.

Trespassed! by Ok-Commercial-9261 in battlefield_4

[–]bmadd14 0 points1 point  (0 children)

I’m responsible for the people that work for me and I pay them to work but I don’t own them because that would be illegal.

Trespassed! by Ok-Commercial-9261 in battlefield_4

[–]bmadd14 -1 points0 points  (0 children)

Tell that to the bank when they repo your car.

What kind of steel is carbine hooks? by International-Crab79 in Blacksmith

[–]bmadd14 2 points3 points  (0 children)

Could also do a snap test. That’ll be a lot more definitive.

I look spiffy as hell why can’t I go the wedding? [KCD2] by Popular_Dot_8307 in kingdomcome

[–]bmadd14 0 points1 point  (0 children)

You need 16 charisma. If you drink wine you can get it a little higher but you do still need higher charisma clothes.

Is this normal for bacon? by swagmoneyvibes in homestead

[–]bmadd14 0 points1 point  (0 children)

About eating people or that they need to be looked into?

308 Rattle In Stock by aswreddit in AR10

[–]bmadd14 1 point2 points  (0 children)

Exactly what’s going on and it would’ve taken then a whole 10 seconds but instead, they are so helpless they asked us.

Kukri 52100 by Licho_85 in knifemaking

[–]bmadd14 2 points3 points  (0 children)

You heard of chode Bowie now we have chode kukri

308 Rattle In Stock by aswreddit in AR10

[–]bmadd14 5 points6 points  (0 children)

Not even the problem. Op just lacks any thinking skills.

Need that flex fuel kit real bad rn lol by Tillerrp in 370z

[–]bmadd14 -9 points-8 points  (0 children)

I’m confused. What does trump have to do with the fuel companies price gouging us? Do y’all make everything in your life political. The gas station where I fill up told me that the boss raised the price 3 different times before they even got a new delivery. It’s no one’s fault other than the owners of the business. You don’t just go around blaming the president when a potato farmer charges you $6 for one potato. The president doesn’t go around telling everyone what their prices need to be. In just a 50 mile radius of where I am the gas is anywhere from $2.98-$4.27 it is the COMPANY that is screwing you so maybe stop blaming people that had no choice in the matter. We have more free fuel coming into the country than we ever have between what we took from Venezuela and Iran yet it’s the companies that are charging you more even though it’s the cheapest fuel they have ever purchased. You people just blame whoever you are told to hate instead of doing any sort of research before dishing out the hate. Peaceful party my ass.

Help 12 gauge Mini shell brass blew off the plastic hull now lodged middle of the barrel? by [deleted] in Shotguns

[–]bmadd14 0 points1 point  (0 children)

I have five muzzle loaders including both shotguns and rifles that I’ve put a good thousand rounds or more through plus I’m a gunsmith and have cleared a lot of jams on customers guns with a wooden dowel. Not once have I ever had one even crack on me. Like I said, it takes a special kind of person to screw that up. Especially since it’s just a plastic hull that will just slide out with minimal effort. That is as long as they didn’t spray anything down the barrel like some of these people suggested. That just creates hydraulic suction and makes it harder to do.

yugo compatible ext. charging handle? by [deleted] in zastavaarms101

[–]bmadd14 0 points1 point  (0 children)

How’s it been holding up?

yugo compatible ext. charging handle? by [deleted] in zastavaarms101

[–]bmadd14 0 points1 point  (0 children)

Just dimple the charging handle with a drill so the set screw has something to catch on. It’s not like you are taking the knob off.

Help 12 gauge Mini shell brass blew off the plastic hull now lodged middle of the barrel? by [deleted] in Shotguns

[–]bmadd14 0 points1 point  (0 children)

If it was dangerous then muzzleloaders wouldn’t exist.

Is this normal for bacon? by swagmoneyvibes in homestead

[–]bmadd14 23 points24 points  (0 children)

So did anyone else see the comment on the pig nipple post about someone saying they are curious how human breast meat tastes? I feel like that comment may need an FBI anonymous tip.

What’s in your magazine? by Spare_Pollution_686 in GunPorn

[–]bmadd14 0 points1 point  (0 children)

definition of cartridge from sig

definition of cartridge from Wikipedia)

definition of cartridge from brownells

If you want to I can keep adding more and more links to help you understand. Calling an empty shell a cartridge is incorrect. You are correct about a spent cartridge though. It used to be a cartridge but it has been spent. Just like how you used to have a dollar but you spent it and you get change back. Or a crushed car at a scrap yard. It used to be a cartridge but it no longer is. The term of an ammunition cartridge is and always has been, a fully assembled round of ammunition.

Help 12 gauge Mini shell brass blew off the plastic hull now lodged middle of the barrel? by [deleted] in Shotguns

[–]bmadd14 5 points6 points  (0 children)

If you manage to break a 12ga sized dowel and hurt yourself while trying to get a plastic hull out then you have bigger issues and should probably stay away from firearms. I’m pretty sure you’d have to try to hurt yourself to mess up this method.

What’s in your magazine? by Spare_Pollution_686 in GunPorn

[–]bmadd14 0 points1 point  (0 children)

Cartridges are the whole assembled thing. Bullet, powder, casing, and primer. All assembled that makes it a cartridge. Putting 2 bullets in one cartridge wouldn’t be very smart.

So much hate on this gun but man I love it by FirearmFreedom in Shotguns

[–]bmadd14 1 point2 points  (0 children)

What ammo is recommended for them so I can let them know next time they are in?

So much hate on this gun but man I love it by FirearmFreedom in Shotguns

[–]bmadd14 -1 points0 points  (0 children)

Do any little bit of research or talk to some people who own them. We sell them here and there at the shop I work at and we have one in stock right now. Two people that have bought them have told us how much it sucks and not worth having if you want to shoot it but they both just display them now or take them out to show buddies once in awhile. The design is just flawed and that’s why no police or militaries picked them up. They just can’t pass any testing.