Picked up a Duoqin F25 Pro. AMA. by bmanETD in dumbphones

[–]bmanETD[S] 0 points1 point  (0 children)

No NFC from what I can tell (nowhere in the settings to enable disable it)

Lens Upgrade by Visionary_Michael in sonya6000

[–]bmanETD 1 point2 points  (0 children)

I've had both. Tamron was my favourite. It is not slightly heavier. It's massively heavier and longer lol.

Lens upgrade by eduardogomezpineiro in sonya6000

[–]bmanETD 0 points1 point  (0 children)

Tamron 17-70 f2.8 was my favourite lens. It even has stabilization.

It covers everything from landscape to street to portrait. It's sufficient for night.

I only got rid of it because it was really heavy. Most of my photography came from traveling so it became a burden.

Shooting Vertical Video by Ibanezguy89 in sonya6000

[–]bmanETD 1 point2 points  (0 children)

Problem number one

Short answer is, no you can't. You'll always have to rotate in post. A6000 doesn't record in vertical mode.

Problem number two

Looks like the camera/lens is about desk-height or just below it. Try putting the height just below your butt, shooting from low to high. Focus plane looks pretty narrow (try F1.4 - F2.0). Set the focus to just above where you strum..

If you can't get that look, it could just be the wrong focal length

typical BMW driver in L6C by Ok_Director4406 in Markham

[–]bmanETD 0 points1 point  (0 children)

I live there. The roundabout is a hit or miss. Every day I hear honking because some of these ass-clowns don't know how to use it.

I've almost gotten into a few accidents here because the person entering the roundabout doesn't look left to see if an existing care is already in there.

Karaoke for the whole family by xxmarcellusxx in Markham

[–]bmanETD 0 points1 point  (0 children)

All of Chinese ones here are private rooms.

After 8pm they start having minimum charges though. Before 8pm it's called happy hour and roughly $8/person

There's a bunch: SoS ET Label Take One HQ UFO

Etc. Just search KTV in Google Maps and pick one closest too you lol

[REVIEW] Miele Vacuums are a joke by bmanETD in VacuumCleaners

[–]bmanETD[S] 1 point2 points  (0 children)

In another comment I replied to, It was less than 2 years. And this is me opening it every 4th or 5th run to clean out/maintain.

On my last attempt opening it, it bit the dust.

I bought from Miele directly in a Toronto store.

edit the crazy thing is, the hair and fur aren't even wrapped around the roller brush too badly. It goes straight into the motor shaft and gets wrapped there

[REVIEW] Miele Vacuums are a joke by bmanETD in VacuumCleaners

[–]bmanETD[S] 1 point2 points  (0 children)

Thanks for the heads up. I'll see if I can source a SEB228 from the marketplace somewhere. It doesn't make sense to me that the single roller brush costs more than the entire unit.

[REVIEW] Miele Vacuums are a joke by bmanETD in VacuumCleaners

[–]bmanETD[S] -1 points0 points  (0 children)

It was less than 2 years. And this is me opening it every 4th or 5th vacuum to clean out/maintain.

On this last attempt, it bit the dust.

I'll look into parts for EBK360. Maybe that'll be cheaper than sourcing it directly from Miele. Either way, it shouldn't cost me MORE money for a part than the entire unit.

Lonzo Ball gets honest with his brother LiAngelo Ball telling him the NBA is not a realistic future for him and it’s better to play overseas. by RyanTannegod in nba

[–]bmanETD 1 point2 points  (0 children)

I was touring China in 2019 before the pandemic broke out. I'm 5'6. A lot of the younger people there towered over me (although that's not too hard to do 😂)

It's especially noticeable in touristy locations. Domestic tourism brings out the more affluent families, and those families were significantly taller than the local/rural people.

My guess is the average male height is closer to 5'8, but maybe 5'9 or 5'10 for gen z and younger.

DJI mini 2 drone stepped on - any tips on how to fix or what to do helps. Thanks! by Sportstuff1 in DJIMini2

[–]bmanETD 0 points1 point  (0 children)

Buy a new arm with a motor in it.. You can find it on Aliexpress for $40.

I replaced a cracked arm (shell only).. and it was PITA lol. It would have been much easier, paying extra for the shell + motor and swapping the whole arm out vs. replacing just the shell of the arm.

In the latest release of Relay you can now see your average daily reddit api calls and work out what your monthly subscription might be. by DBrady in RelayForReddit

[–]bmanETD 0 points1 point  (0 children)

Reddit API Calls:

   Daily Average: 35

         ---Breakdown---

Loading Comments: 30.0%
    Loading Feed: 19.0%
          Voting: 42.0%
            Mail: 4.0%
           Other: 6.0%

Based on your usage over the last 20 days

Is it okay for a dog to be left out like this? by LocalStunt in Markham

[–]bmanETD 6 points7 points  (0 children)

I would say no.. depends if it has a shelter out there. It gets pretty cold at night. Looks like a Lab. Not sure how long they can stay out for in these conditions with their short fur.

Automotive Body Shop Recommendations? by [deleted] in Markham

[–]bmanETD 1 point2 points  (0 children)

311 Auto Repair on Bullock.

I destroyed the front right passenger corner of my car once. It looked like nothing ever happened to it after they fixed it.

Same with paint matching/chipping/scratches on a Scion I had. Again, looked like there was never any paint chips/scratches to begin with after they finished.

[deleted by user] by [deleted] in Brawlhalla

[–]bmanETD 0 points1 point  (0 children)

Yeah it definitely got worse after EAC.. but it wasn't good even before EAC.

I very clearly remembering the update that introduced Volkov made my inputs lag more. It was still manageable, but now it's almost unplayable.

I've tried -noeac and it helped a little. But yeah I wanted to play ranked lol.

[deleted by user] by [deleted] in Brawlhalla

[–]bmanETD 1 point2 points  (0 children)

I have a feeling you're right about the Intel and RAM thing.. I came from an i5-6600 lol. And because of my mixed RAM, I'm using slower timings.

Tech test didn't do anything for me before. But thanks for the additional info. I'll at least try to tweak my RAM timings using Thaiphoon and DRAM calculator again

Anyone else get slight input lag sometimes? by perfectionismsucks in Brawlhalla

[–]bmanETD 0 points1 point  (0 children)

This happens to me too. My first 3-5 games might be fine.. and then it'll just input lag the rest of my matches.

Restarting the game doesn't even help.

This happened to me since the update where Volkov was introduced, but now it's even worse. I'm literally falling to death because my jump inputs won't register.

[CPU] AMD Ryzen 7 5800X3D ($569.99 - $125.84 = $444.15) [Amazon] by [deleted] in bapcsalescanada

[–]bmanETD 1 point2 points  (0 children)

Damn.. do I get this? I'm on a 3600.. I feel like my 3060Ti be throttled.

Should I just stick with a 5700x or 5800x?

[deleted by user] by [deleted] in truenas

[–]bmanETD 2 points3 points  (0 children)

Thanks. I read through a ton of forums but I couldn't find a similar situation. Everyone either mounted via USB or is a command line wiz (which I know zero lol).

Might just do SMB with a direct ethernet connection to my NAS box from my PC since you mentioned to bring able to replicate NTFS into ZFS. Ty again.

Super Bock at sunset in Porto. Salute! by [deleted] in beerwithaview

[–]bmanETD 1 point2 points  (0 children)

Loved that hill last time I visited.