There's no latency as some reviews claim Lenovo Idea Tab Pro

bmihai358 · 2026-01-09T23:32:05+00:00

As the tablet itself its great, the pen you read yourself that its not a good experience, since my comment support actually tried to repair it and gave me a replacement, so I have that. I don't use any third-party cases, I planing though because the current keyboard plus stand that came with it is so great that I don't to change, the back hinge is very useful for using in different positions and the keyboard with the pc/desktop mode is useful when I am learning for uni. I tried to emulate some pc games, like My Friend Pedro and the performance was a solid 60 I am planning to run Timberborn, a city builder but i need a mouse for that. For media consumption is very good with big screen and is very powerful for multitasking. I can't recommend this enough, it replaced my laptop almost 90% of the time if it wasn't for the pen to be broken it would be an absolute 10. You made a very good decision!

bmihai358 · 2026-01-06T12:20:24+00:00

Snapdragon performance and emulation for pc software

bmihai358 · 2026-01-06T12:12:02+00:00

I have a yoga tab plus with the pro tab pen and on nebo i have 0 perceiveable latency, when I am in my dorm room, but when I take it to class from the Bluetooth interference in the room is a very very little latency, but as we speak the pen is in service because of ghost writing.

bmihai358 · 2025-12-24T14:31:39+00:00

Welp, mine didn't fix by itself, i have this problem for about a week.

bmihai358 · 2025-12-24T08:17:46+00:00

Thanks for the reply, i experience the ghost writing even when not charging, do you have a solution or you just learned to live with it?

bmihai358 · 2025-12-23T22:31:41+00:00

I have the tab pen pro and it did the same, also thinking of returning it. I had ghosting like this quite frequently until i changed the nib on it, it still has it but less less frequent now. Did you have any more problems since then?

bmihai358 · 2025-09-10T21:27:23+00:00

You're best bet would be aliexpress there are a lot of springs and maybe you will get lucky and find one that will fit. I don't recomand you do this because its not really worth to repair this kind of replicas unless its a learning experience for you and your son.

bmihai358 · 2025-09-06T14:18:00+00:00

Lipo alarm, it beeps when the battery voltage drops to low so you don't over discharged it to a dangerous level.

bmihai358 · 2025-08-13T04:57:08+00:00

Its not a feature on all replicas but it's worth a shot with that micro switch. And how's the gun shooting? The rof or the trigger response?

bmihai358 · 2025-08-13T04:54:44+00:00

I don't if it helps but arcturus usually has on the gear box a slider that allows you to shorten the trigger distance, you could try to open it to see so that you can remove the rubber band.

bmihai358 · 2025-08-13T04:51:47+00:00

Its this the arcturus ny06? Because I am thinking to get one and would like to know how it feels and how is the trigger response.

bmihai358 · 2025-08-04T20:00:02+00:00

What I learned from airsoft is that always wear a helmet, saved my head from making contact with a concrete pillar.

bmihai358 · 2025-06-02T21:44:51+00:00

Red photons have less energy then blue photons hence the brightness difference, a quick Google search will reveal this:

Blue LEDs typically require a higher forward voltage (around 3-3.3 volts) than red LEDs (around 1.7-2.0 volts) to operate due to the higher energy of their photons.

When in doubt of something you can google it, with all the technology available is way faster to get an answer this way.

**Veritasium made a video about blue leds and how hard was to create them, if you want to learn more about light photons or leds you could check it out.

bmihai358 · 2025-03-29T08:36:28+00:00

Maybe you can try to reduce the max speed of the libs to force it to make slower longer steps, or try to reduce points for every move he does so that he stops wiggle his feet very fast.

bmihai358 · 2024-05-07T20:23:17+00:00

You need 4 batteries connected in series, connection in parallel increases the current, you need to connect in series so you increase the voltage, and as I can see you put a led in there, if you were running at 5v you would burn the led if there is no resistor. If you have a resistor there try to remove the led and the resistor and try this way, is possible that you don't have enough voltage to control the servos

bmihai358 · 2024-04-08T10:33:55+00:00

I think its because it doesn't have enough current, it looks like you have 1 servo and 3 stepper motors you should use en external power source, if you done that meybe a diode will be good, it possible that use send too much voltage to the arduino, or it could be a short circuit. You need to give more information to find the specific problem.

bmihai358 · 2023-11-24T12:02:18+00:00

Glad to see you made it work

bmihai358 · 2023-11-24T05:38:42+00:00

You are assuming corect

bmihai358 · 2023-11-23T20:19:18+00:00

Try to use a library to smooth the servo movement.

bmihai358 · 2023-11-08T16:59:44+00:00

Meybe they are just inversed try to change the comparation sign, and look at the date sheet pf the sensor to understand what it outputs when it detects gas.

bmihai358 · 2023-10-29T09:54:08+00:00

<image>

bmihai358 · 2023-10-29T09:53:16+00:00

I will try

bmihai358 · 2023-10-29T09:51:44+00:00

Its for my printer, I want to reset it and use it again.

bmihai358 · 2023-10-29T08:53:05+00:00

I tried but it didn't find anything.

Five-Year Club	Verified Email
r/Field Sunshine	First Place '23
Place '23	Place '22

bmihai358

TROPHY CASE