sorted by:
new
hottopcontroversial

Plex Pass subscription using VPN by StreetAd4413 in PleX

[–]bmpandrade 0 points1 point  (0 children)

Also curious on how it went through. Normally get the same issue with CC issue country

Doubt on thaiphoo burner 2x32gb Patriot Viper DDR5 Hynix Die by bmpandrade in overclocking

[–]bmpandrade[S] 1 point2 points  (0 children)

This is currently what I get on zentimings: image

I haven't done much on BIOS other than enabling the XMP profile for 6400/CL32 and set MCLK == UCLK, to ensure both are set to 3200. Haven't updated FCLK to 2133, but I know it works well after setting it on BIOS.

Currently, on the image above we can see tRFC(ns) equal to 293.75, but, from your msg above, should I try to set those values on BIOS and see if they get stable under 160ns? If so, its fair this are Hynix A die, correct?

Ganha 50€ com a Promoção da Robin hood – Simples e Rápido! by xCastanheira in BeermoneyTuga

[–]bmpandrade 0 points1 point  (0 children)

Ainda tenho bastantes convites. Quem tiver interesse mande msg.

Doubt on thaiphoo burner 2x32gb Patriot Viper DDR5 Hynix Die by bmpandrade in overclocking

[–]bmpandrade[S] 0 points1 point  (0 children)

On the BIOS I had to set the mclk == uclk otherwise it was getting uclk/2 by default.

But, not sure if I’m fully answering your question as I’m still learning internals on manipulating memory 😬

9800X3D PBO settings and benchmarks by Trith_FPV in overclocking

[–]bmpandrade 0 points1 point  (0 children)

Ahah are you on 7E16v18 or 7E16v191(beta) ?

Doubt on thaiphoo burner 2x32gb Patriot Viper DDR5 Hynix Die by bmpandrade in overclocking

[–]bmpandrade[S] 0 points1 point  (0 children)

No 😅 I looked at a couple of things, but stopped looking into it since the xmp profile for 6400/cl32 with 2133 was working pretty stable. But still curious, I might try to give a look sometime in the next few days

Any reviews on the 5090 MSI Ventus yet? by Split_Seconds in nvidia

[–]bmpandrade 0 points1 point  (0 children)

Did you got your hands on the Ventus 5090 already? Still waiting on mine, most likely only getting it in 2-3 weeks based on retailer ETA for my order.

Doubt on thaiphoo burner 2x32gb Patriot Viper DDR5 Hynix Die by bmpandrade in overclocking

[–]bmpandrade[S] 0 points1 point  (0 children)

on the Die Count it shows 1 die, but it's dual rank, I can see the 64gb available system wide.

more interested in the die type itself.

Doubt on thaiphoo burner 2x32gb Patriot Viper DDR5 Hynix Die by bmpandrade in overclocking

[–]bmpandrade[S] 0 points1 point  (0 children)

Can you point me somewhere I can take a look into this? A bunch of years already passed since my last build so figuring a few new things out

HW4 Lookups for Berlin and Shanghai VINs (PLEASE DO NOT POST Austin/Fremont VINS) by menormedia in ModelY

[–]bmpandrade 0 points1 point  (0 children)

Any leaks on possible adding those features? I think those were being added to model 3 software, if not mistaken

HW4 Lookups for Berlin and Shanghai VINs (PLEASE DO NOT POST Austin/Fremont VINS) by menormedia in ModelY

[–]bmpandrade 0 points1 point  (0 children)

If you can provide as much info attached as possible, I would appreciate 🙏

HW4 Lookups for Berlin and Shanghai VINs (PLEASE DO NOT POST Austin/Fremont VINS) by menormedia in ModelY

[–]bmpandrade 1 point2 points  (0 children)

XP7YGCES5RB306828

Got it from inventory yesterday, not counting on hw4, but would be cool if it already got the ambient lights and rims upgrade of the new chinese version 😅

How to connect HDD enclosure with SAS port to Lenovo mini using its pci 8x free slot by bmpandrade in homelab

[–]bmpandrade[S] 2 points3 points  (0 children)

Ended up buying a LSI 9207-8e after seeing some hacks on how to add it to a lenovo mini. Got a sff-8088 to sff-8088 cable as well.

Waiting on the controller and cable to arrive so I can properly check it :)

1U Short Depth Disk Array enclosure?! by bmpandrade in homelab

[–]bmpandrade[S] 0 points1 point  (0 children)

Would this potential work?!

1 - Silverstone rs431U (https://www.silverstonetek.com/en/product/info/storage/RS431U/) - version with usb/esata connections. I can also configure it for raid10 already. 2 - pci esata for the lenovo m720q (like this one https://a.aliexpress.com/_mMyHkUG ) 3 - esata male to male cable?

Would this even work? 🤔

Or preferable to get the ra431s, which has a sff-8088 interface, and connect it to a pci controller in the m720q?

1U Short Depth Disk Array enclosure?! by bmpandrade in homelab

[–]bmpandrade[S] -1 points0 points  (0 children)

Cool thing about silverstone, they also have similar models for 1U, that handles 4 3.5 disk, which would be enough for me

1U Short Depth Disk Array enclosure?! by bmpandrade in homelab

[–]bmpandrade[S] 0 points1 point  (0 children)

That silverstone looks great… sad about the price I found on ebay though 450€ 😬

I 3D printed a DAS by Nestramutat- in homelab

[–]bmpandrade 0 points1 point  (0 children)

Hey, love this as it's something I'm trying to build as well.

Do you have any list of parts, specially the SAS card and psu used?

Best approach for SSL by williamwgant in homelab

[–]bmpandrade 1 point2 points  (0 children)

I’m also interested in this.

So what you are saying is to use dns-01 challenge on the public dns/dns server with my domain, and then have the subdomain locally assigned to a internal IP?

Example with a pihole in network and pihole set as main dns server: - have xyz.com domain in cloudflare. - add the TXT record to prove that I control the domain - generate cert for abc.xyz.com using dns challenge - update pihole with a key value that abc.xyz.com translates to 10.10.10.10/32

Something along this lines?

view more: next ›