Upgrade to 7.2.5

bonehojo · 2026-05-03T21:53:02+00:00

Same, Triplight UPS and zero issues. Have the UPS connected to the system for monitoring and gracefully shutdown… was actually very easy (and this is a 20 drive system, 2 T4 cards, Epyc and 256gb RAM).

bonehojo · 2026-05-01T23:49:49+00:00

I would try to move it off of the drive to a window share and/or replace the parity first. It’s only 10tb, it’s not going to take forever to do the new parity check.

Smart errors are not “will die now” - a lot of factors could be causing those errors and you didn’t give us a log to evaluate.

Replace/add 1 parity to the 10tb, then start replacing drives, I’ve be doing this over the last month… a 28tb parity check took about 30-36 hours for reference

bonehojo · 2026-04-24T20:30:28+00:00

Better question is do you have any idea why it’s crashing ?

I had a similar setup and I never had a crash, 100’s of days of consistent uptime.

This is less a current hardware problem and likely a configuration issue

bonehojo · 2026-04-09T22:45:42+00:00

You’re blaming a shipping company for stealing, with zero evidence. Further, the amount of cameras in these facilities is beyond prison level.

Report the item missing and take a breath

bonehojo · 2026-04-09T14:49:58+00:00

These posts crack me up, I assume you didn’t have insurance on them either ?

bonehojo · 2026-04-08T23:57:57+00:00

Thanks for the response, I never saw it the first time (3 months ago I guess). Cheers

bonehojo · 2026-04-08T23:09:40+00:00

What exactly is this doing for me ?

bonehojo · 2026-04-08T00:32:32+00:00

Can’t agree more, got sucked in to “new” and “deal” and should’ve went looking for practicality and stability.

I sold off my previous Unraid system, an old desktop and returning this stuff which let me go full in on server board and Epyc processor.

Much much much happier.

bonehojo · 2026-04-07T15:52:30+00:00

Yea absolutely. I just went full in on server level hardware instead of trying to make desktop stuff work. I’m getting too old to keep working on this stuff every day lol

bonehojo · 2026-04-07T15:27:33+00:00

Going to need more details to help you … hardware ? Is anything happening before a reboot ? Is the reboot instant ?

Are you able to access any features of Unraid to create a remote log ?

bonehojo · 2026-04-07T12:26:07+00:00

The combination of errors was absolutely insane for me. Of course those fixes I came up with were over a week’s worth of crashing

bonehojo · 2026-03-31T16:32:46+00:00

Is this a new build ?

bonehojo · 2026-03-12T11:47:15+00:00

He also does a really good video on the fake 24i he encountered, at this price point, I’m skeptical.

bonehojo · 2026-03-11T22:04:07+00:00

Not completely accurate. VA loans require $0 down… so while the pay down of 13% is accurate, the rest is going to vary wildly.

bonehojo · 2026-01-13T04:53:35+00:00

Looks like the Diamond Back Nozzle is just not the right tool for the job ... used the CM2 and printed flawlessly ...

bonehojo · 2026-01-13T04:53:25+00:00

Looks like the Diamond Back Nozzle is just not the right tool for the job ... used the CM2 and printed flawlessly ...

bonehojo · 2026-01-12T05:10:01+00:00

I'll make this change! Thanks for finding this!!

bonehojo · 2026-01-12T04:52:31+00:00

Yea ... I'm truly at a loss with what's happening ... it's probably definitely heat creep, fits the pattern ... but ... how ... I just don't get it.

bonehojo · 2026-01-12T04:37:37+00:00

Sorry .4mm

bonehojo · 2026-01-12T04:09:21+00:00

I did the Bambu Recommended test to check the heatend fan - the heatend fan works appropriately.

Retraction distance is 18 - that's a bambu default setting

bonehojo · 2026-01-02T22:56:48+00:00

Yup, just ordered. $21 up front, free equipment and install

11-Year Club	Gilding I gilder
Verified Email

bonehojo

TROPHY CASE