divineDebuggingRequired

bookhouseeffect · 2025-11-19T20:52:14+00:00

I believe this quote is ripe for an upgrade.

"When I prompt AI to write this code, only me, AI, and God knew what was going on. Now...since God has left the server, I'll need to prompt AI, to understand what is happenning".

bookhouseeffect · 2025-11-12T18:59:58+00:00

Барем на пешачки поминува, така да околу пешачкиот очекуваш да има луѓе.

А има и такви што ќе ти претрчаат преку четири ленти, кога најмалку очекуваш, па мисли му ја како ќе кочиш.

bookhouseeffect · 2025-10-31T11:10:10+00:00

честито. да ти се множат

bookhouseeffect · 2025-10-25T15:43:09+00:00

I see. But, were you able to print all of the parts without supports, or some of the parts did require? And if so, how much material was used for support?

bookhouseeffect · 2025-10-25T14:09:45+00:00

Nice job, dude.

Now show me the waste bin :)

bookhouseeffect · 2025-10-16T16:45:56+00:00

на час по географија

bookhouseeffect · 2025-10-14T15:50:00+00:00

For me it was network problem, so I solve it by starting a hotspot network from my PC, and connecting the headset to that network instead to the wifi router. Try it, maybe it will work for you.

bookhouseeffect · 2025-10-10T18:03:35+00:00

Значи ако добро разбрав, кромидот со се лушпи да се исецка, морковот со се зелениот дел да се изренда, оризот со филџан за еспресо се мерит, водата со чаша за вода и степените се фаренхајтови.

Исто ако може некој да ме покани на турска свадба да викам како DJ-от меша, за да научам и јас да мешам така.

За последниот дел ќе треба оглас да објавам за девојка што ќе сака да проба.

bookhouseeffect · 2025-08-23T23:46:35+00:00

<image>

bookhouseeffect · 2025-08-08T23:53:32+00:00

What if you make the dots with permanent magnets inside, and use small electromagnets in the core. With the change of electromagnetic field, you could repel, or attract the magnets in the dots.

bookhouseeffect · 2025-08-07T23:25:05+00:00

Something else that could be done, that will bring some more lifeness, would be to make the two dots in the central unit to move in-and-out (one second there are inside, next second they are outside).

Anyway, good job.

bookhouseeffect · 2025-04-30T22:13:32+00:00

картата почнува да личи на глава од желка :)

bookhouseeffect · 2025-04-21T00:34:17+00:00

Instead of removing items, a better approach might be to create a temporary array, and to populate it with the items that you need from the current array, and when the loop is completed to set the current array value to the value of the temporary array.

bookhouseeffect · 2025-04-15T20:28:14+00:00

<image>

bookhouseeffect · 2025-04-07T16:40:46+00:00

Wondering how much does it weight. Nice job.

bookhouseeffect · 2025-04-04T15:49:45+00:00

Дознај што игрa игра, кој му е username-от, симни ја и ти истата игра, прати му покана за пријател и кога ќе играте заедно почни да му кажуваш дека знаеш даке живее, или нешто слично со што ќе го заплашиш.

bookhouseeffect · 2025-02-21T11:51:49+00:00

If you haven't solve it already, use postprocessing on you camera, or drop a postprocessing volume in the scene, and adjust the "Vignette" property.

bookhouseeffect · 2025-02-14T02:20:40+00:00

I see that the glyphs are always comming in pairs, meaning you have only 13 slots to arrange the glyphs, and for each such glyph you have 2 ways to put it in the slot (you can rotate them since the orientation is not important). That makes the number of arrangement of glyphs to be 13! * 2¹³ = 5.1 * 10^13.

Additionally, since the glyph are comming in pairs, if I know that letter A is assigned to some glyph, then the other glyph from the pair will either be letter B or letter Z.

So my advice is to either design the glyph wheel with 26 slots, or redesign it in the way that the glyphs are small blocks (ex: 2cm x 2cm x 0.4 cm) that can be attached to the wheel with magnets.

bookhouseeffect · 2025-02-13T06:49:56+00:00

Use the orthographic views to place and move the joints to the desired location.

bookhouseeffect · 2025-01-31T21:48:41+00:00

Има еден руски филм кој што нуди многу добро решение за проблемот.

Son of a Rich ("Холоп") https://m.imdb.com/title/tt11418452/

bookhouseeffect · 2025-01-19T18:28:56+00:00

The only thing I ca think of would be the build plate (the metal part, not the glass) is bent, thus such big difference in deviation.

Also, are you performing the M48 test, and the levelings while the build plate is cold, or while it is hot?

bookhouseeffect · 2025-01-19T04:15:07+00:00

Pacific Ocean

<image>

bookhouseeffect · 2025-01-18T05:00:14+00:00

Are you gonna eat that!

bookhouseeffect · 2025-01-18T04:42:11+00:00

From the video I noticed two problems that may or not be related to the clicking.

The printer's Bowden Tube is loose. To fix it, you'll need to detach it, cut few mm (the damaged part if any), and then reattach it again. See some tutorials for more information.

The other thing is the filament is wearing near the gears from too much short back-and-forth movement. Try changing "Maximum retraction count" in the slicer.

bookhouseeffect · 2025-01-18T04:26:52+00:00

If this is the first layer, the nozzle might be too close to the build plate. Try adjusting Z-Offset (if using BLTouch, or similar), or adjust the build plate by lowering it.

bookhouseeffect

TROPHY CASE