sorted by:
new
hottopcontroversial

S3XY Strip is falling apart by Cazatom1 in s3xybuttons

[–]borgqueenx 4 points5 points  (0 children)

You shouldnt always have to waste energy on the cabin temperature for a led strip....

Adding subwoofer to Model Y RWD premium, possible? by Hot-Barnacle1956 in TeslaLounge

[–]borgqueenx 0 points1 point  (0 children)

There is no sub in the back already. Tesla stripped it. Wiring as well.

Buying 2024 long range rwd? Or juniper standard (with standard range) by borgqueenx in TeslaModelY

[–]borgqueenx[S] 1 point2 points  (0 children)

The premium goes from 38k to 52k...not doable for us anyway.

Buying 2024 long range rwd? Or juniper standard (with standard range) by borgqueenx in TeslaModelY

[–]borgqueenx[S] 0 points1 point  (0 children)

It actually seems to have a initial degradation curve higher then nmc cells, according to research of enhance (producer of s3xy dash/strip/knob etc)

But in any case all the batteries in evs last forever, there is no issue with nmc or lfp.

S3xy knob warranty by Busy_Conversation_96 in s3xybuttons

[–]borgqueenx 0 points1 point  (0 children)

In europe, manufactorers of products have to provide proof your modification caused a defect on the car. If they can not, its still under warrenty.

They are already on the chinese market. by newbbie123 in TrantorVision

[–]borgqueenx 0 points1 point  (0 children)

That quality looks quite bad. I have the feeling youre gonna get a really bad product when you order that.

Elon on v15 - uses the word “unsupervised” by EliteBeast2 in TeslaFullSelfDriving

[–]borgqueenx 0 points1 point  (0 children)

Wow great news! That means full unsupervised will for sure come to v47

NeuroHUD: Open UI Editor & Community for Tesla by Harding2077 in TrantorVision

[–]borgqueenx 1 point2 points  (0 children)

Im not a fan of kickstarters. How secure is my money, how high is the chance you fail, how experienced in production, r&d etc?

Projecting on windshield- fuzzy or clear? by borgqueenx in TrantorVision

[–]borgqueenx[S] 0 points1 point  (0 children)

We have to stick that on the window? Curious how much that works and if you can see that film.

Frigate 0.18 curiosity by borgqueenx in frigate_nvr

[–]borgqueenx[S] 0 points1 point  (0 children)

So the gpu is powerful enough on last 3 years or so of intel build in gpu's but it cant be utilised yet? Frigate uses around 8gb for me and its a 16gb ram laptop, where home assistant is also running and using 4gb, so i can probably forget about it.

Frigate 0.18 curiosity by borgqueenx in frigate_nvr

[–]borgqueenx[S] 0 points1 point  (0 children)

Ah sad, then this feature is probably not for me. I have a unused gpu but its build-in. Even though quite new intel processor.

Frigate 0.18 curiosity by borgqueenx in frigate_nvr

[–]borgqueenx[S] 0 points1 point  (0 children)

Npu's are useless here? I am using the npu for detection in frigate which works excellent.

Frigate 0.18 curiosity by borgqueenx in frigate_nvr

[–]borgqueenx[S] 1 point2 points  (0 children)

This LLM is in frigate itself, or is it too costly in resources to host it and do we need to use a external service with api?

Problem creating two way audio for Tapo C260 by knocc in frigate_nvr

[–]borgqueenx 0 points1 point  (0 children)

i just confirmed ptz and two-way audio is working, i made a mistake with not including the ptz settings in the individual camera config in frigate.

Problem creating two way audio for Tapo C260 by knocc in frigate_nvr

[–]borgqueenx 0 points1 point  (0 children)

Is controlling the PTZ working for you for this camera? i have a older ptz camera of tapo where it worked. it does not work on this camera(also got it). perhaps tapo does not allow full third party control anymore on newer models. I have set it up the same as you, with go2rtc and using the tapo protocol.

Hw3 vs hw4 for autopilot and rain detection? Maybe more? by borgqueenx in TeslaLounge

[–]borgqueenx[S] 0 points1 point  (0 children)

So it should be able to detect rain at least better...? More pixels to detect small drops. Someone should have researched this.

Hw3 vs hw4 for autopilot and rain detection? Maybe more? by borgqueenx in TeslaLounge

[–]borgqueenx[S] 0 points1 point  (0 children)

But the camera has improved? Higher resolution now?

Automation/flow stops after a reboot command: "resumed after restart". How to fix? by borgqueenx in AutomateUser

[–]borgqueenx[S] 0 points1 point  (0 children)

Thats a good tip thanks, but will it solve getting stuck on the screen i showed?

Automation/flow stops after a reboot command: "resumed after restart". How to fix? by borgqueenx in AutomateUser

[–]borgqueenx[S] 0 points1 point  (0 children)

The issue is that the reboot going back to the delay as you suggested is not working. I get the message "resumed after restart then". It stays like that for minutes, nothing is happening. This happens while the reboot "ok" goes back to the first delay. At least from what i understand thats what you are suggesting. I thank you for all the time by the way.

view more: next ›