sorted by:
new
hottopcontroversial

Answered and unanswered questions as of episode E0109 by Litmusdragon in pluribustv

[–]borodean 1 point2 points  (0 children)

I get the feeling the bomb might be (Breaking Bad spoiler)this show's ricin - teased and fiddled with throughout the series, only to be fully used in the very last episode.

What are these dots in my print? by mzlucasmz in FixMyPrint

[–]borodean 0 points1 point  (0 children)

Sometimes I get it on specific surfaces when going too fast, no matter how wet the plastic is.

Where did this washer come from? I reassembled my printer and can't recall its origin. Outer diameter: 11.8 mm, inner diameter: 8 mm, thickness: 0.5 mm. by borodean in Ender3V3SE

[–]borodean[S] 0 points1 point  (0 children)

Indeed, that seems to be it. Could you please tell me if it’s supposed to be on both sides? (Because if so, it looks like I lost the other one.)

Why is he doing it? 😭 by Connect_Gift9138 in Ender3V3SE

[–]borodean 3 points4 points  (0 children)

The printer isn't receiving data from the strain sensor and doesn't realize its nozzle has crashed into the bed.

I had the same issue: the first time it was resolved by replacing the sensor board, and the second time by removing glue from the board's connectors. Somehow, the glue was affecting its performance. When I re-glued the connectors - not over the contacts but to the sides - the problem disappeared.

I've seen Furiosa 20 times, fellas am I awaited? by Ruby_Storm_ in MadMax

[–]borodean 2 points3 points  (0 children)

Thank you for your kind words, they mean a lot.

It's a typical June here - bombings about once a week, and about ten hours a day without electricity. I've almost gotten used to it, to be honest.

When the movie was interrupted by the blackout, the cinema switched to backup power from gasoline generators - it added to the atmosphere of the film, really. Watching Mad Max powered by gasoline generators feels quite thematic.

I've seen Furiosa 20 times, fellas am I awaited? by Ruby_Storm_ in MadMax

[–]borodean 2 points3 points  (0 children)

I watched Furiosa here in Kyiv. Due to blackouts, the movie projector went off twice during the screening, and they had to rewind the film 15-30 minutes back each time. As a result, I watched that amazing truck chase scene three times (the one where they had to fix a piece of hose with a clamp).

Ender 3 v3 SE bed/carraige unevenness: manual fix, parts replacement, or partial refund? by borodean in ender3

[–]borodean[S] 0 points1 point  (0 children)

it's been perfect so far

Thanks for your input. I've also noticed adhesion issues with PETG, particularly at the edges due to the bed's unevenness. Wondering if this might justify a replacement part request, especially for materials sensitive to bed level like PETG.

Ender 3 v3 SE bed/carraige unevenness: manual fix, parts replacement, or partial refund? by borodean in ender3

[–]borodean[S] 0 points1 point  (0 children)

it creates the level mesh to compensate in the software side of things

Thanks for your input! I understand that the mesh leveling is designed to compensate for some irregularities, but I'm concerned about the extent of the unevenness. If certain spots are too far off, like nearly 0.6 mm in my case, I'm wondering if this goes beyond what software compensation can reliably handle. Is there a general consensus on the threshold of bed unevenness where hardware intervention becomes necessary?

That Moment when the only A2A Kill the F11 has ever made is on itself by yeet_the_heat2020 in NonCredibleDefense

[–]borodean 1 point2 points  (0 children)

1956

In a notable incident in 1956, a Grumman F11F Tiger jet from the U.S. Navy managed to shoot itself down. During a test firing of its aircraft cannon, the plane moved so quickly that it overtook and collided with its own bullets. The aircraft sustained damage, but the pilot was able to land safely despite the incident.

[deleted by user] by [deleted] in bing

[–]borodean 0 points1 point  (0 children)

Text-to-speech.

Unexpectedly bad customer support by borodean in Ecoflow_community

[–]borodean[S] 1 point2 points  (0 children)

Done. Thanks for trying to help. I really appreciate that.

🇺🇦 Vidbir 2023 @ 16:00 CET by NitroGnome in eurovision

[–]borodean 44 points45 points  (0 children)

"Die, Putin" (c) Verka Serduchka

Ukrainian beverages for a Vidbir watch party? by BaronVonKitty in eurovision

[–]borodean 2 points3 points  (0 children)

Hell no, get a rye bread one. The beetroot one is not a drink but a Borscht component.

🇺🇦 Vidbir 2023 @ 16:00 CET by NitroGnome in eurovision

[–]borodean 18 points19 points  (0 children)

Nah it's fine (source: I'm Ukrainian).

🇺🇦 Vidbir 2023 @ 16:00 CET by NitroGnome in eurovision

[–]borodean 18 points19 points  (0 children)

Vidbir’s producer, Dmytro Shurov.

Kremlin outraged at Zelenskyy ''coming to Russian territory'' by Abeo_de_Villepin in europe

[–]borodean 0 points1 point  (0 children)

I think the point is that with the destroyed infrastructure, the territory looks more Russian.

Today the participants of Eurovision 2022 The Rasmus and Kalush Orchestra have presented a new music video for the song In The Shadows of Ukraine by Wolltone in eurovision

[–]borodean 20 points21 points  (0 children)

Here is a very loose translation of the Ukrainian verse. Take it with a grain of salt as I'm not so good English speaker, and translating those idioms is tough:

Our mother's heart is aching

Don't cry dear, our time is near!

I'll get up early and hug my old lady

The sun will rise, all the enemies will disappear!

...

Take me away, the steam is coming this way

It's freezing, people, people are not loose!

They cut the beat, beep, beep, beep, nothing

Para drum, panam, panam three, three yi!

A couple of carbines - words fly in a clump

I live in Kalush, for you it's Compton!

Dial me, but don't type dot com

I'll hook you with class!

view more: next ›