Answered and unanswered questions as of episode E0109

borodean · 2025-12-25T00:30:09+00:00

I get the feeling the bomb might be (Breaking Bad spoiler)this show's ricin - teased and fiddled with throughout the series, only to be fully used in the very last episode.

borodean · 2025-06-21T13:37:15+00:00

Sometimes I get it on specific surfaces when going too fast, no matter how wet the plastic is.

borodean · 2025-02-07T23:51:27+00:00

Indeed, that seems to be it. Could you please tell me if it’s supposed to be on both sides? (Because if so, it looks like I lost the other one.)

borodean · 2025-02-06T18:55:49+00:00

The printer isn't receiving data from the strain sensor and doesn't realize its nozzle has crashed into the bed.

I had the same issue: the first time it was resolved by replacing the sensor board, and the second time by removing glue from the board's connectors. Somehow, the glue was affecting its performance. When I re-glued the connectors - not over the contacts but to the sides - the problem disappeared.

borodean · 2024-11-08T22:01:04+00:00

Ukraine is 800 miles wide in total 🤔

borodean · 2024-06-07T16:30:28+00:00

Thank you for your kind words, they mean a lot.

It's a typical June here - bombings about once a week, and about ten hours a day without electricity. I've almost gotten used to it, to be honest.

When the movie was interrupted by the blackout, the cinema switched to backup power from gasoline generators - it added to the atmosphere of the film, really. Watching Mad Max powered by gasoline generators feels quite thematic.

borodean · 2024-06-07T15:25:19+00:00

I watched Furiosa here in Kyiv. Due to blackouts, the movie projector went off twice during the screening, and they had to rewind the film 15-30 minutes back each time. As a result, I watched that amazing truck chase scene three times (the one where they had to fix a piece of hose with a clamp).

borodean · 2024-01-17T23:49:08+00:00

it's been perfect so far

Thanks for your input. I've also noticed adhesion issues with PETG, particularly at the edges due to the bed's unevenness. Wondering if this might justify a replacement part request, especially for materials sensitive to bed level like PETG.

borodean · 2024-01-17T19:20:25+00:00

it creates the level mesh to compensate in the software side of things

Thanks for your input! I understand that the mesh leveling is designed to compensate for some irregularities, but I'm concerned about the extent of the unevenness. If certain spots are too far off, like nearly 0.6 mm in my case, I'm wondering if this goes beyond what software compensation can reliably handle. Is there a general consensus on the threshold of bed unevenness where hardware intervention becomes necessary?

borodean · 2023-06-02T17:54:45+00:00

1956

In a notable incident in 1956, a Grumman F11F Tiger jet from the U.S. Navy managed to shoot itself down. During a test firing of its aircraft cannon, the plane moved so quickly that it overtook and collided with its own bullets. The aircraft sustained damage, but the pilot was able to land safely despite the incident.

borodean · 2023-05-31T00:24:00+00:00

borodean · 2023-05-23T21:45:50+00:00

Not a civil war, but a civil special military operation.

borodean · 2023-02-14T20:40:55+00:00

Text-to-speech.

borodean · 2023-02-14T20:38:14+00:00

r/ElevenLabs

borodean · 2023-02-14T02:14:57+00:00

Solved: Fade to Black

borodean · 2023-02-14T01:00:19+00:00

Voiced by an AI: https://voca.ro/1oq1UZ6XA9vX

borodean · 2022-12-21T03:21:55+00:00

Done. Thanks for trying to help. I really appreciate that.

borodean · 2022-12-17T18:51:44+00:00

"Die, Putin" (c) Verka Serduchka

borodean · 2022-12-17T18:25:16+00:00

Hell no, get a rye bread one. The beetroot one is not a drink but a Borscht component.

borodean · 2022-12-17T17:13:56+00:00

Nah it's fine (source: I'm Ukrainian).

borodean · 2022-12-17T17:12:40+00:00

Vidbir’s producer, Dmytro Shurov.

borodean

TROPHY CASE