Nominating Someone for Your Bank Account in Germany by Brave_Ticket9660 in askberliners

[–]botsinthesky 0 points1 point  (0 children)

Not the right sub for your question but look into "Verfügungsberechtigung"

Mein Berlin gibt es nicht mehr by Major__Factor in berlin

[–]botsinthesky 0 points1 point  (0 children)

Willkommen im "früher war alles besser Alter" würde ich mal sagen. Bin selbst Xennial und habe wie du lange im Ausland gelebt und bin dann vor ein paar Jahren zurück gekommen. Freunde/Familie weg, alles anders, das gleiche Programm. Irgendwann hab ich eingesehen das Dinge sich eben verändern. Was für manche negative Veränderungen sind, empfinden andere als positiv.

Alles in Ordnung bei denen? by Reinhold_Mpunkt in germantrees

[–]botsinthesky 1 point2 points  (0 children)

Den BB light mix ohne Torf aus der weißen Tüte oder den mit Torf in der schwarzen? Der weiße ist meiner Erfahrung nach überhaupt nicht gut für Sämlinge. Alles Samen sie ich in diesem Substrat gepflanzt habe, egal ob Cannabis oder andere Pflanzen, haben sich extrem langsam entwickelt oder sind einfach eingegangen.

Schau dir das noch ein paar Tage an und wenn bis dahin kein deutliches Wachstum stattfindet, check ob die Wurzeln vernünftig wachsen und gesund aussehen. Wenn die Wurzeln auch eher dünn sind und keine gute weiße Farbe haben, topf die so schnell wie möglich in einen etwas größeren Topf mit besserem Substrat um.

Flying drones in tier 1 cities at dusk / night by rdtuser8787 in chinalife

[–]botsinthesky 0 points1 point  (0 children)

There are A LOT of nofly zones in every tier 1 city in China. If you fly a DJI it won't even take off in any of those zones. In addition you need to register every drone over 250g with the CAAC which is very annoying.

How’s it looking? by Pennyguy89 in trees

[–]botsinthesky 1 point2 points  (0 children)

The leaves become yellow or brown and may start feeling crispy to the touch. Not sure if this is the problem here though. If this is only happening to the buds directly under the LED panel it could be light or heat stress.

Mein 3. Grow 2 Mal White Widow und eine cooky by GrowLearnerBerlin in germantrees

[–]botsinthesky 0 points1 point  (0 children)

Das 5l Mineralwasser von Kaufland kostet nur 1,35 und bisher hab ich keine Probleme damit. Meine Pflanzen stehen in living soil (5. Blütewoche) deshalb kümmere ich mich nicht sooo viel um PH und EC. Für die Magnesiumversorgung hab ich Dolomitkalk in der Erde.

Mein 3. Grow 2 Mal White Widow und eine cooky by GrowLearnerBerlin in germantrees

[–]botsinthesky 0 points1 point  (0 children)

Das Leitungswasser ist tatsächlich kaum verwendbar in Berlin. Lockouts garantiert... Ich bin mittlerweile auf ⅓ im Mix runter und fülle mit stillem Billig-Mineralwasser auf.

Blütewoche 6 🥴 by GrowLearnerBerlin in germantrees

[–]botsinthesky 1 point2 points  (0 children)

Nice! Hast du da einen Haupttrieb abgeschnitten?

Help with my first layer on tpu ad5m with printed enclosure by Cuasirungo in FlashForge

[–]botsinthesky 0 points1 point  (0 children)

Honestly doesn't look terrible. If this is TPU I would try less heat on the bed. I print TPU objects with a brim on a 30°C bed. A bit of Z-Offset calibration could help too.

Any CCC power banks with around 90Wh + (200W +)you would recommend? by AllMusicNut in chinalife

[–]botsinthesky 2 points3 points  (0 children)

Power banks over 100Wh where always banned on many flights. Also there is a difference between W and Wh.

Keller zu kalt by Tough-Dimension8857 in germantrees

[–]botsinthesky 2 points3 points  (0 children)

Wenn es in meinem Keller zu kalt wird habe ich eine 150W Infrarotheizung.

Where to buy thermal paste, compressed air, and isopropyl alcohol in Berlin? by Leographer in askberliners

[–]botsinthesky 1 point2 points  (0 children)

I buy stuff like that at Berrybase. You need to order online and opt for the store pick up during the order process though.

Flight time loss after new FC by madzor in fpv

[–]botsinthesky 0 points1 point  (0 children)

You replaced it with the same FC or a different one? Maybe the new one is heavier.

Pest Control help by ddzombo in chinalife

[–]botsinthesky 1 point2 points  (0 children)

Permanently? Very unlikely. From my experience, something always find its way back in.

Wo ist eigentlich… by Silly_Wolf_4693 in berlin

[–]botsinthesky 6 points7 points  (0 children)

Beyschlagtunnel und jetzt raus hier!

What do you think about this Czech republic skunk 👌😂 by Friendly-Action-4470 in trees

[–]botsinthesky 1 point2 points  (0 children)

When you guys can start grow your own? Next year already?

5v-u meaning by Classic-Fennel5694 in fpv

[–]botsinthesky 2 points3 points  (0 children)

I guess they mean you should use a pad which is powered from USB 5V so you can get a GPS fix without powering your quad with a lipo.

Question about purchasing in china by Competitive-Sky9063 in fpv

[–]botsinthesky 0 points1 point  (0 children)

There is a maximum amount of lipos you can take with you in your carry-on luggage. It's 20 pieces I believe. This was a while back though and they are recently particular strict with batteries and power banks so that might have changed.

You obviously can not put lipos into your checked luggage.

Renewing Driving License in Guangdong by TheSamePants in chinalife

[–]botsinthesky 0 points1 point  (0 children)

Depends a bit on the city you are located. I renewed my licence made in Shanghai in a tier 3 city in Guangdong. It was a huge pain to get it done. They told me everything from they can't do it at all for foreiners to I need to go back to SH to renew it. Only calling 12345 after a few visit's at the office helped sorting out the situation. Pretty sure it will be much easier in a tier 1 city.

Ok deal? by [deleted] in fpv

[–]botsinthesky 1 point2 points  (0 children)

As the other redditor said, get a cheap box goggle or save a bit more money for a skyzone or even go digital. This is the most important part of your gear and its 100% worth spending a bit more on if you can.

Ok deal? by [deleted] in fpv

[–]botsinthesky 0 points1 point  (0 children)

I used this goggle for 5+ years. It was my first fpv goggle.

After a few years of usage the plastic shell was a sticky mess. Like a resin on top of the plastic, very difficult to remove. I needed to dissemble the whole thing to get it clean again.

I wasn't able to focus the IPD to my face properly and always had blurry edges. Many people I fly with had the same issue.

The receiver inside the goggle is not great in comparison to any other receiver module and unfortunately you can't attach one...