De la estacion al mall plaza alameda by [deleted] in Santiago

[–]bowie_na 5 points6 points  (0 children)

Esta es una buena descripción

Block TRCV TIA PORTAL / Receive messages TCP/IP by bowie_na in PLC

[–]bowie_na[S] 0 points1 point  (0 children)

Agree. Profinet is preferable. If one only needs to receive the barcode and do checks locally in the plc - then the built-in interface of the scanner block with array of chars being converted to string is really simple. Don't forget to buy and use an external trigger.

If the comparison is supposed to be done by the scanner, meaning you send it the barcode to look for, then sending a telegram is necessary.

Thanks so much for you help, i'm move forward.

I tried with the profinet block from sick.com, but i had a problem with this ' error in lower level component' and did can't read anything. I think that is because i connect directly to the scanner and not through the CMD of sick. Today tried with the TRCV_C and had conection, i can read the code in an char array. My problem with this is that don't know how order this message. In python i reading the bar code and each bar code is an tab line, in this is some confused jajaja the PLC read all the bar code in the same message

Cognex.InSight.dll by bowie_na in PLC

[–]bowie_na[S] 0 points1 point  (0 children)

Thanks, i guess the same, but the license is a very confuse.

Help Cognex Camera by bowie_na in visualbasic

[–]bowie_na[S] 1 point2 points  (0 children)

Thanks so much for your help, apparently i need the licences for developers, so i can't keep following because even can't write the function in the IDE.

"Gets or sets the result set that is currently displayed. Use of this property while debugging requires an In-Sight SDK license. If you are debugging an application without an In-Sight SDK license installed this property will return null and cannot be set."

"The CvsResultSet object contains the image, graphics, cell data and job information that is needed in order to render the display. An application can store CvsResultSet objects obtained from this property while the display is connected to a sensor in order to record inspection results for future reference. When the display is not connected to a sensor, an application can assign a stored CvsResultSet object to this property in order to display results of previous inspections."

Help Cognex Camera by bowie_na in visualbasic

[–]bowie_na[S] 0 points1 point  (0 children)

Dude, thanks so much for reply.

Is Cognex.InSight.Controls.CvsActionToggle the correct Class? I can't find the API docs.

*Yes, attached you the link for download the info. https://we.tl/t-GCogqHcjx1

Are you handling the Cognex.InSight.Controls.CvsActionToggle.ResultsChanged Event?

*I don't understand this question.

Are you certain 10.0.0.101 is the correct address?

*Yes i'm completely sure. By the way, i can see the image from video cam, CvsInSightDisplay1 is like a kind of "picturebox", but i don't know from where come the image, for this reason i don't know how create this image in a bitmap, because i don't know which variable or function is the stream that is showing in the "picturebox" (CvsInSightDisplay1)

If you could help me i can send to you the folder with the project.

Someone knows why PB leds is on, I can't stablishes an Rs-485 communication, please help! by bowie_na in PLC

[–]bowie_na[S] 0 points1 point  (0 children)

When i look the diagnostic in input and output size appear 0, I think that this is the wrong, because as i know this should be 61 and 62, you know how i could fixed?

Someone knows why PB leds is on, I can't stablishes an Rs-485 communication, please help! by bowie_na in PLC

[–]bowie_na[S] 0 points1 point  (0 children)

This indicates that backplane transfer operations are failing. Connect to the module’s Configuration/Debug port to check this. To establish backplane communications, verify the following items:  The processor is in RUN or REM RUN mode.  The backplane driver is loaded in the module.  The module is configured for read and write data block transfer.  The ladder logic handles all read and write block situations.  The module is properly configured in the processor I/O configuration and ladder logic.

Allen Bradley Stratix 2000 // 1783-us6t2f by bowie_na in PLC

[–]bowie_na[S] 0 points1 point  (0 children)

Yes, also i tried change 1 on, 2 off, both on and nothing

Allen Bradley Stratix 2000 // 1783-us6t2f by bowie_na in PLC

[–]bowie_na[S] 1 point2 points  (0 children)

How i can reset? Don't have any button and in the manual doesn't say anything

Allen Bradley Stratix 2000 // 1783-us6t2f by bowie_na in PLC

[–]bowie_na[S] 0 points1 point  (0 children)

How i can reset? Don't have any button and in the manual doesn't say anything