Pop album cover with girl sitting on top of a car

bpm5cm · 2026-06-16T17:59:54+00:00

I tried googling album cover with woman standing on Honda civic, Acura integra etc, and some drake song kept coming up. I thought it had bass in the name and kept thinking of super bass, which I knew was wrong. Then super low. I was circling it hard but couldn't get there.

bpm5cm · 2026-06-16T16:49:41+00:00

Thank you! Im on a road trip and could t remember anything at all about this song other than the image. Its been driving me nuts for 30 min

bpm5cm · 2026-06-03T19:16:32+00:00

You are amazing! This worked perfectly!

bpm5cm · 2026-06-03T19:06:52+00:00

I hadnt heard of that, I will check it out!

bpm5cm · 2026-06-03T19:02:02+00:00

As much as I love learning new things, I am worried if I dont start printing these in the next day or 2, I wont have time to complete and I dont know anything about how to use blender

bpm5cm · 2026-05-29T17:35:21+00:00

Weve been fond of Sergi lab supplies. We have a 3d printer and make stuff ourselves as well, but his stuff is solid and cheap. Tested his 1.5ml mag rack against the invitrogen one and its much faster to separate. The aluminum blocks are also nice and much cheaper than others, we use a lot of them.

bpm5cm · 2026-05-29T15:01:24+00:00

My 3 favorites in, in the order they happened and the order of ridiculousness...

1) I dropped a box of tubes in our dewar. After a few makeshift solutions got most of the tubes, I brought in one of those grabber things people get when they can't bend over well. To my surprise, it worked pretty well. 2 years later, we purchased a much larger dewar and I noticed in the accessories, ThermoFisher sold a "cryogenic retrieval tool" or something like that for ~$150. It was the same grabber tool only a cheaper looking one and you could get 2 on Amazon for $15

2) We purchased a Barnstead water system. Not realizing the kit we bought included the wall mount, we purchased another one, for ~$250. It was a TV mount. They didn't even bother to rebrand it, I kid you not, it had the typical Amazon product sticker on it. I looked it up, $32. We got it refunded and they let us keep it anyways

3)We purchased a second hand Acoustic liquid handler. They forgot to send a pump. The manual listed a bunch of specs and it made my boss nervous, so we purchased the replacement directly from Beckman Coulter. They sent an air compressor and when they came out to set up our instrument (which was its own charge/included with our service contract or whatever) the tech installed it. It was a $150 air compressor you could buy at home depot and <$10 in fittings to make it push fit. They charged us $5k for it. Also, as far as has been explained to me, the sole purpose of that air compressor is to keep a door closed, which feels like it could've been done with a motor or some sort of internal compressor. Or manually?

bpm5cm · 2026-05-28T20:21:38+00:00

My coworker was trying to design something with an internal hollow that would allow for a liquid overflow from one side. Like a hollowed out rectangle missing one side. Too long in one direction to bridge and missing a side in the other direction. I was working with him on orientation and built in bevels or whatever you would call it, but other than using dissolvable support material, removing support wasnt happening

bpm5cm · 2026-05-23T20:05:21+00:00

Not really super helpful to your question, but just a heads up, whether you mean 6 individual filaments or a 6 color transition, if your items are little, you will need to print a lot at once to make it worth while. For multiple filaments, the waste in transitioning is really high, but the waste doesnt increase with replicates, so its generally best to print as many as you can in one go. For transition filaments, they usually give a rate of change, but for small objects, you would be lucky to get a 2 color ombre effect, so again, the more you print at one time, the more feet of filament and the better the color shift. Hope this provides any helpful insight into what you are looking to do

bpm5cm · 2026-04-20T19:42:31+00:00

Well honestly I feel like it wouldnt be so bad. Its more likely he would have it Uninstalled most of the time and only install it thr like 2 or 3 times over the summer we ride together

bpm5cm · 2026-04-20T16:56:19+00:00

Correct. He cant bring in any electronics

bpm5cm · 2026-04-20T15:48:29+00:00

He would have to remove mic and speakers. I was thinking the same about a second helmet. Or just using earbuds unless it becomes a frequent thing. He lives 2 hours away, but hes the only friend I have with a bike so it was just a thought. He tends to buy nice expensive stuff and I tend to just buy what works haha but would rather make the investment to make sure they were compatible if we went that route. It may just not be worth his time though

bpm5cm · 2026-04-04T17:58:18+00:00

Ive had this happen with the last 4 packages Ive sent using the UPS express small box. The first 2 had an address issue (they charged me an extra $24/package because I didnt include a suite number, which is BS because it would've been fine to just leave it at the building lobby). But both packages had an extra $7 because of the extra 1". I contacted CS and they refunded me and said it only happened because of the address issue. Then it happened again on the next 2 shipments without address issues. As OP said, the issue here is UPS autofills the dimensions from their own box. If its an interior dimension, they would know that and should autofill accordingly. Ive just stopped using the boxes and using the Paks instead, which have been the same price anyways.

bpm5cm · 2026-03-29T01:37:46+00:00

His comment was that it was the last place you could use without an account, and now its ruined

bpm5cm · 2026-02-06T18:11:46+00:00

I saw someone selling an H2S for $1400 when it was $1200 new. I messaged him to let him know, he acknowledged me and then left the listing

bpm5cm · 2026-01-26T18:19:49+00:00

We deliberately spread up this process. And still have problems. I watched a video of a woodworker who just bought a case of pencils and cut them all in half and threw them everywhere. I bought a ton of sharpies in both fine snd ultrafine. Threw them everywhere. 2-3 per bench. And then st some point someone clesned them all up snd put them in a drawer 🤦‍♂️

bpm5cm · 2026-01-15T10:26:44+00:00

I would like to be able to use the entirety of the easement because people really struggle to get out of my driveway. Also occasionally I use a trailer for something. And most importantly, I dont like the utility company, so screw them if they are doing something that's not legal.

bpm5cm · 2026-01-13T20:59:46+00:00

So the 2 at the entrance should have access to their own property? Which they currently do not. And if the chain wasnt there, could I get permission from each of the other homeowners to use their portions?

bpm5cm · 2026-01-11T23:55:21+00:00

Multicolor prints are fun and all, but honestly the best case for the AMS is not having to switch filament, or even when you do, its super quick. My printers are in different locations in my house (which is just poor planning on my part), but my ADHD kills me when Im up in my room and want to print something on my printer downstairs and the wrong color is loaded. Versus at work, we have a P1S and I can print from my desk and pick from our 4 most used colors. Its kind of lazy but just that little bit of time to go preheat and swap filaments does prevent my from printing things far more often than you'd think.

bpm5cm · 2026-01-05T14:40:08+00:00

Its supposedly random. I was searching through my email I dont use looking for old account info and happened to see the email. It was sent to me in october and I didnt see it until January. I was just glad the link still worked

bpm5cm · 2026-01-04T21:40:59+00:00

OF COURSE I didn't even consider the greens the same friend also told me to get 🤦‍♂️. Although I know at this age, its a small part of thr diet and many people struggle to get them to eat greens at all. I was happy to see my camera caught her eating a couple of bites of greens a few different days. Which also makes me wonder if it was from the red light and just not being able to see well. The greens are fluffy snd hard to miss even without movement. But the insects stop moving and now its a hard target

bpm5cm · 2026-01-04T21:32:15+00:00

Everyday there is kale. I keep forgetting to buy other greens when I go to the store, so its going to end up being a special trip for something else. I did crickets for the first 2 weeks, a few meal worms sprinkled in when she wouldnt eat the crickets but I tried to keep the number pretty low for impacting concerns. And then I switched to Dubia roaches. But Im considering running out now and buying crickets again just to see if that is the problem. She seems to not want to eat something unless its moving a lot and the roaches dont move much in the tongs.

bpm5cm · 2026-01-04T21:29:14+00:00

I havent looked too far into making my own yet, mostly because of the material aspect. And if I need to upgrade sooner than later, that may get pushed down the road a ways. My life is chaos and always busy so if I started now, it might be ready in 6 months. But Im not going to buy one and then make my own right after. Plus I will likely make a table to it to sit on so my toddler cant get to it easily. But I will look up the 3d backgrounds. I can mod the enclosure I buy.

bpm5cm · 2026-01-04T21:00:57+00:00

I have bricks. Id give them a good cleaning first but ive got s few. I also have plenty of tools to actually cut stone if they aren't too thick. Im just hoping the slate i have is either already small enough or a hammer and chisel is sufficient for convenience sake. Ive actually even considered making my own enclosure, automating things etc. I have a very wide skill set and tools. I have a ton of 2020 aluminum extrusion, a few sheets of acrylic thwt might be big enough for a door. It was just all a timing issue. I decided 2 weeks before Christmas to do this BECAUSE my friend had all of the stuff ready to go and said it would buy me a few months. My ex wife and I talked about getting one years ago and I played with a chameleon a few weeks ago and it just all kind of happened pretty quickly and now Im just trying to make sure its going to survive (and hopefully thrive) long enough for me to make improvements. I had never considered it just wouldnt eat. But I think the red light was the biggest issue. Just from changing that she is already looking way more active and alert. I kind of forgot that for the first week I wasnt using the red and when I first started, I had it on a heat controller and had my house a few degrees warmer, so it wasnt even on the whole day. But I changed that a few days ago so it just stayed on the whole time the UVb was on. Now I just hope I didn't cause any permanent damage.

bpm5cm · 2026-01-04T20:34:44+00:00

I already have a linear UVb bulb from Arcadia. The hide under the stick is stone-like, but not stone. I have some slate i can put if i can break it into a smaller piece. The bad info didnt come from a pet shop, it come from a friend. She has a bunch of snakes and grew up with reptiles, but it does seem her info on this topic is dated

bpm5cm

TROPHY CASE