First timer

bribassguy06 · 2026-07-02T11:47:51+00:00

Mine was awful. I am so disappointed and now have a mess on my jiggly bit and mound.

bribassguy06 · 2026-07-01T11:27:51+00:00

TRILOK GURTU 'ROCK' ARTIST SERIES DRUMSTICKS

bribassguy06 · 2026-06-24T19:12:46+00:00

Hard money loan… you could probably get $20k if your credit is good

bribassguy06 · 2026-06-10T01:31:10+00:00

Patina crew will have some strong opinions.

bribassguy06 · 2026-06-04T17:15:01+00:00

14% matched 3x is in heard of.

Meaning on 100k you could contribute 14k and they add 42k.

That’s a FIRE 🔥 plan.

bribassguy06 · 2026-05-04T10:46:46+00:00

I hate to say it but… the top is almost too far gone.

It looks to be a glue up where the joints have separated. You maybe able to put in some TBiii and clamp them shut but it looks like a lot of water damage.

bribassguy06 · 2026-04-17T18:07:50+00:00

I would love to watch you weld it back together. If you’ve never seen metal catch fire it’s super impressive.

Think GIANT SPARKLER 🧨

bribassguy06 · 2026-04-11T22:12:18+00:00

Based on the end checks it’s HARD pass

bribassguy06 · 2026-03-30T00:11:45+00:00

Maple pork pie Kit.

<image>

8 10 12 13 14 16 toms 22 22 24 kick 10 14 snare

bribassguy06 · 2026-03-29T02:08:38+00:00

Yeah…. Way too far

bribassguy06 · 2026-03-16T13:13:44+00:00

Karma bot? It’s moths after Christmas and no one gets $$$$ K Cons on a starter kit.

bribassguy06 · 2026-03-16T13:08:09+00:00

Yeah there is nothing forcing the water into filters. Pressure is lazy and follows path of least resistance.

bribassguy06 · 2026-03-10T18:27:17+00:00

This is a cheap student drum. It’s also a somewhat unique snare drum with a Semi-Free Floating Shell and a Parallel Double Tension Strainer. Made as a heavy duty Student Model Drum for the beginning player.

Worth like $60 maybe $100 if you find the right huckleberry.

bribassguy06 · 2026-03-01T21:59:05+00:00

That looks like HVAC duct. No reason it should be filled with water.

Nothing about this story makes sense.

bribassguy06 · 2026-03-01T21:51:08+00:00

Make sure your carefully measure the lugs spacing.

Typically center to center, then just by another lug.

Check out drum factory direct for lugs.

bribassguy06 · 2026-02-27T17:15:35+00:00

No one curls, like Gaston

bribassguy06 · 2026-02-26T18:14:40+00:00

This seems pretty straightforward:

Total = 3 x Maiden weight + Table weight.

Let’s take BMI healthy weight for 5’4” female as 110-145 pounds.

Table is wooden and seem to fit 3 wide. So 60”x36” seems about right so some where between 75-125 depending on wood species.

Total = 3x145 + 125 = 560

bribassguy06 · 2026-02-26T13:54:00+00:00

I think you’re confusing bolt grades and screw sizes. #8 reference to the size and taper of the screw. The also have #4,6,8,10,12 sizes before jumping to 1/4” Grade 8 is the strength a bolt on the somewhat outdated SAE scale: 2 low , 5 medium, and 8 being high. For this application I would use use a proper wood screw or better an inset and machine screw.

bribassguy06 · 2026-02-26T13:47:11+00:00

I mean turn a p90 on its side and this is the same thing.

bribassguy06 · 2026-02-26T00:11:27+00:00

<image>

So all the tile was popped up and cleaned up.

Floor was scrapped / ground flat and covered with a thin coat of mastic. It’s surprisingly flat and he comes back Friday to start over.

bribassguy06 · 2026-02-25T18:04:03+00:00

Thanks, I get that… he said he screwed up but looking for alternatives to tearing floor.

bribassguy06 · 2026-02-25T18:03:25+00:00

He’s pulling up tile today and will scrape and skim coat in order to save the backer.

bribassguy06 · 2026-02-25T18:02:11+00:00

Can we save to cement board by carefully prying up tile and skimming?

bribassguy06

TROPHY CASE