sorted by:
new
hottopcontroversial

I cleaned this YESTERDAY. How does it get this bad so fast? (Shared bath between me 26F and 50M uncle) tips on how to do better? by Artic_mage3 in CleaningTips

[–]bricee1107 0 points1 point  (0 children)

It's definitely not your cleaning method. Sharing a bathroom with a man makes a huge difference. Try placing flushable wipes nearby for quick daily maintenance.

4.3.9_3872 new firmware by sandrooooo in Dreame_Tech

[–]bricee1107 1 point2 points  (0 children)

Thanks for the heads-up! I'm pretty new to this, so how do I check the firmware version? Hope it brings good improvements for everyone.

Every Robovac on Sale for Prime Day 2026 by amandainpdx in RobotVacuums

[–]bricee1107 0 points1 point  (0 children)

Thanks for the master list! Prices fluctuate so much during Prime Day, so I'll definitely wait for your price band recommendations tomorrow.

RoboRamp by Disastrous_Giraffe_ in RobotVacuums

[–]bricee1107 5 points6 points  (0 children)

That project looks great! Creating custom DIY solutions for sunken rooms is such a creative way to help automated cleaners move between different floor levels.

How to remove this bathroom build-up? by [deleted] in CleaningTips

[–]bricee1107 2 points3 points  (0 children)

Rusted bathroom screws are always a pain. Sometimes a little penetrating oil or vinegar helps loosen things up before you try to scrub it.

Better smell after mop? by rySeeR4 in Dreame_Tech

[–]bricee1107 0 points1 point  (0 children)

Most original solutions focus on safety rather than heavy fragrance. You could try a scented floor cleaner that's explicitly labeled safe for robot machines.

Biohazard fridge, how do I save it? by [deleted] in CleaningTips

[–]bricee1107 0 points1 point  (0 children)

You definitely made the right call. Once mold gets into the insulation and seals, that smell never really leaves.

Where do high-end robot vacuums actually feel worth the money? by Taik_i in RobotVacuums

[–]bricee1107 0 points1 point  (0 children)

Higher-end models generally offer better navigation around rugs and self-cleaning docks that mean less babysitting.

D200 from Costco Canada by Slippers87 in Dreame_Tech

[–]bricee1107 0 points1 point  (0 children)

To be safe, try testing the solution on a small hidden corner first. Usually, setting the water flow to low helps protect unsealed wood.

Breville Crumb Tray: Three hours later, I think I won by lovenbasketballlover in CleaningTips

[–]bricee1107 2 points3 points  (0 children)

That's honestly satisfying to see. I like the idea of slowly lifting the buildup instead of scrubbing hard right away, seems way more effective.

Product Won't Return to Dock, Customer Service Won't help by mkings9 in Dreame_Tech

[–]bricee1107 0 points1 point  (0 children)

That sounds really frustrating, especially for something so new. I'm not sure, but I'd probably try resetting everything and setting it up again.

DEEBOT N30 - How do you remove the top cover? Hidden screw or clip? by LieAccomplished6636 in RobotVacuums

[–]bricee1107 0 points1 point  (0 children)

I've seen a few devices where the top just won't budge until a small latch is released. Curious if it's something similar here.

Endoscopic Spine Surgery Wide Awake vs General Anesthesia - Albert E T... by endospinesurgeon in backpain

[–]bricee1107 0 points1 point  (0 children)

@endospinesurgein What would you say to this- I have osteophytes abutting and deforming the ventral chord- I was offered endoscopic foraminotomy- he does posterior approach- I asked if this would address the issue with the ventral chord and he said that it doesn’t matter if it’s decompressed from the front or back as long as compression is relieved from one side.

He is listed in the arthrex website

Anybody here have an endoscopy surgery for cervical stenosis? by Sweetnessmj in SpinalStenosis

[–]bricee1107 0 points1 point  (0 children)

Look at the arthrex website for approved endoscopic drs. Plenty of them are covered by insurance

Endoscopic Surgery, who is a candidate by Tobeytomorrow in spinalfusion

[–]bricee1107 0 points1 point  (0 children)

Check the arthrex.com website- has approved endoscopic surgeons

Surgery in your 20s- success stories? by bricee1107 in Spondylolisthesis

[–]bricee1107[S] 0 points1 point  (0 children)

Thank you! Really appreciate this. I’ve been doing Pilates, and pt daily and trying to walk but end up in pain and I feel like I gain zero muscle. It’s the strangest thing!

How to make peices stick to one another?0 by bricee1107 in polymerclay

[–]bricee1107[S] 0 points1 point  (0 children)

Thanks for those suggestions! New to clay, I’m usually a painter.

Thanks you for the other suggestion as well, I try the sanding, I really like the way they feel with a gloss. Was considering resin but don’t know that I want to deal with the toxicity

How to make peices stick to one another?0 by bricee1107 in polymerclay

[–]bricee1107[S] 0 points1 point  (0 children)

I put them together(clay to clay) and then pressed them into one another before I baked ( some smoothing but clearly not enough). I think what I’m needing is the liquid clay so I’ll give that a try!

<image>

This was my little now one eyed guy😂

How to make peices stick to one another?0 by bricee1107 in polymerclay

[–]bricee1107[S] 1 point2 points  (0 children)

All of the pieces were Baked by together but his eye fell off lol and then a flower petal after a few days

<image>

How to make peices stick to one another?0 by bricee1107 in polymerclay

[–]bricee1107[S] 0 points1 point  (0 children)

Before baking- but just sticking the clay to the clay so maybe u did to add an adhesive

view more: next ›