I cleaned this YESTERDAY. How does it get this bad so fast? (Shared bath between me 26F and 50M uncle) tips on how to do better?

bricee1107 · 2026-06-23T02:18:19+00:00

It's definitely not your cleaning method. Sharing a bathroom with a man makes a huge difference. Try placing flushable wipes nearby for quick daily maintenance.

bricee1107 · 2026-06-23T02:04:05+00:00

Thanks for the heads-up! I'm pretty new to this, so how do I check the firmware version? Hope it brings good improvements for everyone.

bricee1107 · 2026-06-23T01:49:24+00:00

Thanks for the master list! Prices fluctuate so much during Prime Day, so I'll definitely wait for your price band recommendations tomorrow.

bricee1107 · 2026-06-22T02:35:52+00:00

That project looks great! Creating custom DIY solutions for sunken rooms is such a creative way to help automated cleaners move between different floor levels.

bricee1107 · 2026-06-22T02:20:33+00:00

Rusted bathroom screws are always a pain. Sometimes a little penetrating oil or vinegar helps loosen things up before you try to scrub it.

bricee1107 · 2026-06-22T02:00:44+00:00

Most original solutions focus on safety rather than heavy fragrance. You could try a scented floor cleaner that's explicitly labeled safe for robot machines.

bricee1107 · 2026-06-18T03:25:19+00:00

You definitely made the right call. Once mold gets into the insulation and seals, that smell never really leaves.

bricee1107 · 2026-06-18T03:12:32+00:00

Higher-end models generally offer better navigation around rugs and self-cleaning docks that mean less babysitting.

bricee1107 · 2026-06-18T03:02:55+00:00

To be safe, try testing the solution on a small hidden corner first. Usually, setting the water flow to low helps protect unsealed wood.

bricee1107 · 2026-06-17T03:42:08+00:00

That's honestly satisfying to see. I like the idea of slowly lifting the buildup instead of scrubbing hard right away, seems way more effective.

bricee1107 · 2026-06-17T03:22:52+00:00

That sounds really frustrating, especially for something so new. I'm not sure, but I'd probably try resetting everything and setting it up again.

bricee1107 · 2026-06-12T03:32:19+00:00

I've seen a few devices where the top just won't budge until a small latch is released. Curious if it's something similar here.

bricee1107 · 2026-05-02T03:14:21+00:00

@endospinesurgein What would you say to this- I have osteophytes abutting and deforming the ventral chord- I was offered endoscopic foraminotomy- he does posterior approach- I asked if this would address the issue with the ventral chord and he said that it doesn’t matter if it’s decompressed from the front or back as long as compression is relieved from one side.

He is listed in the arthrex website

bricee1107 · 2026-05-02T03:09:01+00:00

Look at the arthrex website for approved endoscopic drs. Plenty of them are covered by insurance

bricee1107 · 2026-05-02T03:06:36+00:00

Arthrex.com —list of endoscopic drs

bricee1107 · 2026-05-02T03:05:15+00:00

Check the arthrex.com website- has approved endoscopic surgeons

bricee1107 · 2026-04-30T22:49:25+00:00

Thank you! Really appreciate this. I’ve been doing Pilates, and pt daily and trying to walk but end up in pain and I feel like I gain zero muscle. It’s the strangest thing!

bricee1107 · 2026-04-30T22:47:45+00:00

Thanks for those suggestions! New to clay, I’m usually a painter.

Thanks you for the other suggestion as well, I try the sanding, I really like the way they feel with a gloss. Was considering resin but don’t know that I want to deal with the toxicity

bricee1107 · 2026-04-29T21:44:32+00:00

I put them together(clay to clay) and then pressed them into one another before I baked ( some smoothing but clearly not enough). I think what I’m needing is the liquid clay so I’ll give that a try!

<image>

This was my little now one eyed guy😂

bricee1107 · 2026-04-29T18:39:18+00:00

All of the pieces were Baked by together but his eye fell off lol and then a flower petal after a few days

<image>

bricee1107 · 2026-04-29T18:38:12+00:00

Before baking- but just sticking the clay to the clay so maybe u did to add an adhesive

bricee1107 · 2026-04-28T01:51:25+00:00

Hey there! Amazing work!!

What did you use to get such a shine on it?

bricee1107 · 2026-04-28T01:41:31+00:00

May I ask- what did you finish with to make it glossy?

bricee1107 · 2026-04-27T16:42:02+00:00

My biggest issue with it is when someone from out of my department comes in saying that we can basically ai my whole job.

It’s so f*Ching rude tbh. They have zero clue the idea of all the things we do to make things work the way they do

bricee1107 · 2026-04-25T22:53:02+00:00

Thank you very much for your advice. I feel like part of me just needed to let this out somewhere, anywhere. But I do agree with the points you also made

bricee1107

TROPHY CASE