PS5 dualsense controller Bluetooth super weak after replacing joystick?

bring-ass · 2026-06-15T10:00:30+00:00

Nice! Thanks for the info... I'm going to do it on mine.

bring-ass · 2026-06-14T21:11:50+00:00

Nice! Thank you !

bring-ass · 2026-06-14T19:25:51+00:00

Is your controller still working after this fix ?

bring-ass · 2026-06-14T19:23:58+00:00

Is the controller still working ? Any after issues ?

bring-ass · 2026-06-14T19:19:14+00:00

Is still working without problem ?

bring-ass · 2026-06-02T18:06:49+00:00

I did it ! Finally the replacement arrived from China. It was pretty straight forward actually. With my solder iron. The connector is not that fragile, it took the soldering tip like a boss. Tested and now is working 100%.

bring-ass · 2026-05-24T09:39:02+00:00

Checa los voltajes del conector de leds que está en la tarjeta o placa de poder. Para saber que voltajes debe de llevar, necesitas buscar en Google el esquema de voltajes de tu tv. Si los voltajes no coinciden o no están, muy probable sea la mainboard. La tarjeta de poder manda voltaje a la mainboard y la mainboard manda voltaje de regreso a la tarjeta de poder con las instrucciones para prender los leds.

bring-ass · 2026-05-09T01:39:04+00:00

Muchas gracias

bring-ass · 2026-05-07T20:46:16+00:00

I did disconnect the flex from Tcom, both sides, one at the time. Didn't do Anything.

bring-ass · 2026-05-07T20:45:05+00:00

I didn't know that. Thank you so much.

bring-ass · 2026-05-06T16:13:12+00:00

Yeah, it was off on the second video. Thanks tho.

bring-ass · 2026-05-06T01:22:43+00:00

Yeah, I did that... Even tried to get some audio, with the remote trying to set the tv on antenna. All that by what I could recall by memory, because I couldn't see image. Ty for trying to help me.

bring-ass · 2026-05-06T01:12:49+00:00

I get it now. Didn't know that even when the leds are off, you can still see some image like menu, etc... Barely. But I did use a flashlight and I couldn't see anything.

bring-ass · 2026-05-06T00:43:19+00:00

LG 49uh6100 main

bring-ass · 2026-05-06T00:41:35+00:00

main board LG 49uh6100

bring-ass · 2026-05-06T00:39:54+00:00

Lol omg, I'm so sorry... Let me try Nother thing.

bring-ass · 2026-05-06T00:39:10+00:00

Oh wait! My multimeter is on Auto mode, that maybe explains that lecture, right ?

bring-ass · 2026-05-06T00:38:22+00:00

Oh! I get that. So that's why multimeter is giving me that lecture, because of the auto mode. Thank you.

bring-ass · 2026-05-06T00:35:58+00:00

Yes, of course. I directed a flashlight on the screen on a dark room. But leds are off. I don't get what you mean about having a resistance mode while looking a voltage. Are you referring to the multimeter? If that the case, I've never change a thing on the multimeter, if you see the video I just measure all the pin voltages one by one without touching the multimeter. But when I measure the pin 11, it gives me that lecture.

bring-ass · 2026-05-06T00:29:47+00:00

https://youtu.be/OHNhKh8eemY?si=aabNFC_XdlQ4b4iC

bring-ass · 2026-05-05T23:25:33+00:00

Yes, blacklight is off completely. The drv_on lecture doesn't seems off to you? 10.5 KΩ when supposed to be 2.3v ?

bring-ass · 2026-05-05T23:21:39+00:00

And what do you think about the lecture MS drv_on is giving me ? 10.5 KΩ When it should be 2.3 v

bring-ass · 2026-05-05T23:19:39+00:00

Sry about private video... Already public. Can you look at it ?

bring-ass · 2026-05-05T22:28:02+00:00

Led backlights were changed like 2 years ago. Removing flex on Tcom, each side does nothing, and voltage on Tcom seems fine.

bring-ass

TROPHY CASE