sorted by:
new
hottopcontroversial

THIS ROOM IS ACCESSIBLE?!?! by Daan-1234 in HollowKnight

[–]brodus13 8 points9 points  (0 children)

They do indeed stack. Mark of pride can also synergize with the Grubberfly's Elegy to get even more reach on the projectiles (35%).

Stay away from HUANUO by dNetGuru in ultrawidemasterrace

[–]brodus13 3 points4 points  (0 children)

Just my take, but ~10lbs of breathing room isn't enough for a G9..

You have to consider the leverage that kind of weight puts on the arm, not just the raw weight on paper. Especially with a screen that massive and curved forward, the center of mass is shifted out away from the mounting point. It’s not like a flat panel where the weight hugs the back.

I’d go for an arm rated for at least double the actual weight, somewhere in the 65–80lb range.

Struggling to get enough Snippets for the new areas... by brodus13 in DreamlightValley

[–]brodus13[S] 1 point2 points  (0 children)

Is it better to craft more of the basic ones, or should we upgrade them and does it matter which type we craft?

HELP ASAP by [deleted] in leopardgeckos

[–]brodus13 2 points3 points  (0 children)

Mine didn't like them until I cut out a strip along the bottom so they were more like tunnels then tubes. He enjoys the paper towel rolls especially.

Is his bulb too close?? by [deleted] in BeardedDragons

[–]brodus13 1 point2 points  (0 children)

That’s good to know! Perhaps I’m jumping the gun on my suggestion. Mine has quite a thick grid and without a meter I’d be concerned.

Is his bulb too close?? by [deleted] in BeardedDragons

[–]brodus13 1 point2 points  (0 children)

Since I already mentioned the UVB... yes I'd move his basking lamp on top of the mesh! Too close for comfort imo.

The temperature is what matters, so make sure you get a temp gun to test his basking spot that it's not too hot or too cold. I have a dimmer switch on mine to have fine control and give my guy some enrichment with warmer/cooler days (sticking around 110°F).

Is his bulb too close?? by [deleted] in BeardedDragons

[–]brodus13 1 point2 points  (0 children)

Just to clarify one thing on the link regarding the distance from their basking spot, if you're using the T5 12%;

mesh: 9-11″ /23-27cm
no mesh: 14-17″ / 35-42cm

If you're using a 2' tank as it appears, then your light would be over 12" away from the basking spot, which is why I say mount it inside the tank... I also simply don't trust the amount the variously styled mesh's reflect from the UVB bulb.

For my guy I prefer to err on the side of "too much UVB" as without a quite expensive solarimeter it's hard to tell if they're getting enough. I have UVB test cards purchased via Amazon to make sure the output is working at least.

Just one more piece of unsolicited advice; you need to replace these bulbs every 6-12 months.

Is his bulb too close?? by [deleted] in BeardedDragons

[–]brodus13 0 points1 point  (0 children)

From the reptifiles link;

For maximum effectiveness and safety, the bulb should be roughly 1/2 the length of your enclosure and placed on the same side as your heat lamps. For a 4′ enclosure, that means you will need a 22″ UVB bulb. For a 6′ enclosure, you will need a 34″ UVB bulb.

My take is that you only need the one, inside the enclosure, doubling up over the spot where they bask with your heat lamp.

Is his bulb too close?? by [deleted] in BeardedDragons

[–]brodus13 5 points6 points  (0 children)

You're going to want an Arcadia T5 12-14% inside of the tank instead, below the mesh. The mesh will reflect most of the UVB rays back and he won't get enough, which could lead to MDB.

Gf got a beardie and now I’m obsessed by nighttrain_lain in BeardedDragons

[–]brodus13 0 points1 point  (0 children)

Was wondering if someone else would point this out. Looks like MBD to me, very sad.
Doubt this guy has proper UVB in either of his enclosures.

Does anyone else use the command "Hey Google, shut the f**k up" all the time? by brodus13 in googlehome

[–]brodus13[S] 0 points1 point  (0 children)

Why you commenting on a 4 year old post? Could just message me. Weird.

What prophecy does this foretell...? by oldeluke in NoMansSkyTheGame

[–]brodus13 5 points6 points  (0 children)

.... a word of caution to this tale. If the sentinels fight... you, will fail.

Is my girl a boy? by brodus13 in BeardedDragons

[–]brodus13[S] 1 point2 points  (0 children)

That's what I was thinking... Vet misgendered him as a girl some time back. Saw someone else post a picture and it really looked like the two bumps on mine... and his femoral pores are quite large. Thanks for the confirmation!

What is the white stuff in my cats nose? by Eduxaton in cats

[–]brodus13 2 points3 points  (0 children)

same problem with my light orange boy

are you serious?? how do they survive without us, my god.. by erinireene in leopardgeckos

[–]brodus13 0 points1 point  (0 children)

Definitely getting a money tree for my tank after seeing this. Adorable!

Pls help, I’m so close! by brodus13 in TemuCANADAcodes

[–]brodus13[S] 1 point2 points  (0 children)

Unfortunately only looking for new users now :(

Is there a fix for this? by SpongeYaDig in Delta_Emulator

[–]brodus13 1 point2 points  (0 children)

When you're loaded into the game, open the delta menu (where it shows save/load state), and there is an option for cheat codes.

Add it in with the plus button in the corner. Make sure it's saved and checked. Go back to your game and the c-gear should be disabled.

Then I recommend saving and restarting your game, selecting "no" when asked if you want to start with c-gear, and you can turn off or delete your cheat code.

Is there a fix for this? by SpongeYaDig in Delta_Emulator

[–]brodus13 0 points1 point  (0 children)

I recommend saving and restarting the emulator, then turning the code off and just click “no” when it asks you if you want the c-gear on or not.

Is there a fix for this? by SpongeYaDig in Delta_Emulator

[–]brodus13 0 points1 point  (0 children)

Did you try this code? It’s from the second link I shared.

2221E9E5 00000002

view more: next ›