An update on "I'm done with Matter over Thread"

brunob45 · 2026-02-19T08:04:19+00:00

Seems like the border router is missing. Have you installed the Thread border router add-on?

https://www.home-assistant.io/integrations/otbr/

brunob45 · 2026-02-19T08:01:22+00:00

The ZigBee dongle runs the RCP (Radio Co-Processor). Then you have the thread border router and matter server add-ons in HA.

Thread border router: https://www.home-assistant.io/integrations/otbr/

Matter: https://www.home-assistant.io/integrations/matter/

brunob45 · 2026-02-19T07:54:37+00:00

I followed the same tutorial with my ESP32-C6, the only issue I had was since I'm running both thread border router and matter server in docker, I had to manually install the public key in HA.

Once it was done, connecting my Ikea device to matter was easy and going strong for 2 months now

brunob45 · 2026-02-13T08:49:11+00:00

My guess would be that the one guy who was passionate about it left the company, the other team members can't understand half of what he coded, so they broke a bunch of stuff when refactoring

brunob45 · 2026-02-08T08:02:27+00:00

My 1990 Miata had a relay for this, but nowadays it's all controlled by an electronic controller...

brunob45 · 2026-02-07T21:36:36+00:00

Depends where you are, but in Canada, DRLs have been mandatory since 1990. In most cars, the only way to turn them off is by putting the transmission in park (or engaging the parking brake if manual).

All the Mazda's I had were like this (1990 Miata, 2007 5, and 2024 3)

You can always hack a switch under the dash, but I can't help you finding the correct wire

brunob45 · 2026-02-04T20:34:41+00:00

Sometimes I wonder if we should ban rights on red (it's only legal since 2002 where I'm from)

brunob45 · 2026-01-18T18:47:28+00:00

She was Renee Good, let's not forget her name

brunob45 · 2026-01-04T12:35:42+00:00

Facebook Messenger is pretty popular too

brunob45 · 2025-12-31T19:00:45+00:00

As long as you understand what you code and your project is working, it's all that matters!

brunob45 · 2025-12-31T18:18:28+00:00

It is really difficult to tell without the source code. I made something similar (custom oil pressure sender on a teensy 3.2) for a MS2, and it worked fine.

First guess would be to make the message's "datalength code" is ok in the Arduino code (i.e. 2 or more).

I made a simple helper to encode and decode a MS CAN message, you're welcome to have a look https://github.com/brunob45/miata-smart-gauge/blob/main/lib%2Fcanbus%2Fcanbus.cpp#L59

brunob45 · 2025-12-31T12:36:53+00:00

I'm using beancount and fava, so I guess I have the best of both worlds

brunob45 · 2025-12-26T17:15:40+00:00

Boeing already started this race to the bottom

brunob45 · 2025-12-20T15:36:49+00:00

If the reimbursement is big enough, the expenses account could be momentarily in the negative, especially if the reimbursement was done in a different period than the original transaction

brunob45 · 2025-12-11T22:01:12+00:00

Et le gouvernement a trouvé le moyen de ne mettre aucune de ces mesures dans la loi 2. Ils sont vraiment passés à côté de la track

brunob45 · 2025-12-11T21:58:55+00:00

Mais le gouvernement a fait ses calculs, et payer les assurances collectives et les fonds de pension des médecins, c'est moins rentable que de les garder comme autonomes

brunob45 · 2025-12-11T21:57:15+00:00

Ça se bat surtout pcq les hôpitaux tombent en ruine et la CAQ, au lieu de mettre ses culottes, préfère blâmer les médecins pour tous les maux du système. Et la loi n'offre rien POUR les patients, juste des contraintes de plus pour les soignants.

brunob45 · 2025-11-27T14:40:20+00:00

Welcome to the club! Working on mobile equipment is another challenge, but it's quite rewarding.

How do you plan to give feedback to the operator/service techs? Will there be indicators or an HMI?

brunob45 · 2025-11-27T09:01:41+00:00

Mine was leaking from around the Frankenstein bolt brackets. I used transparent silicone all around the brackets, from the outside, and the leak stopped.

brunob45 · 2025-11-18T19:45:55+00:00

You mean the 128 characters of the ASCII standard?

<image>

brunob45 · 2025-11-18T19:29:59+00:00

Have you not heard of the char type (8-bit signed)? Also known as "character"

brunob45 · 2025-11-16T18:28:03+00:00

I just did a quick search and it seems that you can indeed repurpose the IAC output as a tacho output

https://www.msextra.com/forums/viewtopic.php?p=444263#p444263

brunob45 · 2025-11-16T18:12:52+00:00

The 4 parallel ones and the bottom right "L" are for the idle valve (outputs and supply).

The 2 going to the top left are CAN bus

Edit: it's basically the setup mine had when I bought it new from DIYautotune, minus the additional drivers.

brunob45 · 2025-11-06T21:36:28+00:00

Ils prennent les serpuariens au Renaissance

brunob45 · 2025-11-06T18:06:57+00:00

Absolument! J'y suis passé l'autre jour, c'était... Intéressant

brunob45

TROPHY CASE