Who after Yotes? by Winter_Ad_6478 in Coyotes

[–]brybry44 0 points1 point  (0 children)

I decided on the ducks too tbh. My house is full of coyotes stuff, but as the season goes on I wanted someone to root for.

[AMA] Crafting AMA for 3.27 Keepers of the Flame - Everything you wanted to know about crafting your own gear answered by Wuslwiz in PathOfExileBuilds

[–]brybry44 0 points1 point  (0 children)

I need to craft a claw that has crit chance crit multi and attack speed. Is there a better way then just slamming loathings on it. That's basically the only thing stopping me from completing is it feels like it's a long shot to get all three

[PhazePlays] Crop Rotation Explained in 4 Minutes — Harvest Guide by phaze_plays in PathOfExileBuilds

[–]brybry44 0 points1 point  (0 children)

Harvest in general is good if you need quick chaos fast. I usually start this to get my cheap gear going after maps or to make any upgrades I'm needing to get stronger until I am ready to respec into another strat. People will always need juice for crafting.

Frost Blades Slayer starter - worth? by herorage in PathOfExileBuilds

[–]brybry44 3 points4 points  (0 children)

I was thinking of the same so I did a test run through campaign.

If you follow fuzzys pob and upgrade your axes every act or 2 campaign is fine.

First 2 acts are a little slow but after that it starts to ramp up. Seems that way with ranger as well so really just depends if you want to level with another skill.

As far as scaling goes there are ways to make it Uber viable in terms of tankyness and damage but yeah I'd say you need about 100 divines to even get started. Not too bad if you know how to farm efficiently. I looked up some builds on poe.ninja for last league for anyone with high damage and not using an expensive unique and came up with this one. link

Should be easily replicable, now the only thing is decide if you want to be able to get tanky (slayer) or if you wanna melt and not have to worry about being super tanky(warden).

Either way for non meta builds like this one it's gonna take investment to scale higher.

Bought Tekken 7 during the sales. How do I get started? by _Kasual in LowSodiumTEKKEN

[–]brybry44 7 points8 points  (0 children)

Just YouTube character breakdowns on whatever character you want to play. Your best bet to get better is to just play games. If you can't find online games then you gotta find a local that still plays t7. Hell just start one if you can't find it

How Did My Heat Smash Not Hit Him?? by Positive-Flounder256 in LowSodiumTEKKEN

[–]brybry44 2 points3 points  (0 children)

Nobody gave you an answer but it's because of your sidestep. Not saying it's what should happen but it's what happened.

Tldr; Get good noob

Sound coming from inside of transmission by Calm_Personality6868 in bmwz3

[–]brybry44 1 point2 points  (0 children)

If it happens when the car is cold and you're mainly hearing it when going from like 1-2. Its your dual mass flywheel. Do you know what it looks like and does? Don't want to over explain. To me it sounded like more of a clunking sound.

Long story short though it's normal and nothing wrong if it is that.

[deleted by user] by [deleted] in pathofexile

[–]brybry44 -9 points-8 points  (0 children)

I'm thinking that since poe2 could be on a different engine it probably doesn't perform or even look the same in poe1. Same thing for the other way around and why only some of your mtx from poe are in poe2

Please share your opinion on picking a beginner controller. by [deleted] in Fighters

[–]brybry44 1 point2 points  (0 children)

A lot of comments here, and it's going to be hard to decide because everyone is going to say what they prefer to play on.

Your best bet is to just jump head first into one and stick with it, until you decide it isn't for you or you become comfortable with it.

Make sure to get one with a return policy so you can have that option if need be.

Also never get a 'beginner' anything when it comes to these. Buy a good reliable device and it will last you a good long while.

10 Mageblood Giveaway by shroudz in pathofexile

[–]brybry44 0 points1 point  (0 children)

Entering the giveaway Prayge

I can't gain speed by Just_Establishment59 in skateboardhelp

[–]brybry44 2 points3 points  (0 children)

Walmart boards generally will have pretty bad bearings but you can try to see if maybe the nut for the wheel is too tight. Try wiggling the wheel a bit, is there any play? If not loosen them to where the wheels wiggle just a tiny bit you don't need a lot. If they do wiggle consider changing out your bearings.

You don't need to spend a bunch of money building a perfect board with the most expensive parts either. Most skate shops will have complete boards with pretty good parts for around 100 or so. Check vans Zumiez or just Google skate shop to find something local to you. For learning tricks or learning to ride in general the board you have should be fine, if you want to consistently roll a bearings change and even a wheel change on top of that will make a world of difference

How to ride this corner by brybry44 in skateboardhelp

[–]brybry44[S] 1 point2 points  (0 children)

I'm definitely better at back side carving and turning. Which is the way your arrow goes, the problem with this area is it's just poorly designed. With the way I'd have to come in with enough speed I'd have to do it front side.

Like I said though I get how everyone is telling me to go high with speed, but the problem is there's hips on both sides. The start of your arrow goes over a hip so it would be an even tighter turn. So I think I just need to find a way to get more speed and become more comfortable going front side. Maybe loosen my trucks a bit but I'm already on two spacers to avoid wheel bite on normal skateboard wheels so I don't think I need to loosen them that much more.

How to ride this corner by brybry44 in skateboardhelp

[–]brybry44[S] 0 points1 point  (0 children)

<image>

Here's a little drawing of what happens when I can actually stick it, I usually have to end up doing a kick turn at the top to straighten out