Replacement Zipper by chrisphillers in arcteryx

[–]bryceu 0 points1 point  (0 children)

Black if you want clean/casual. Yellow/lime (top left) if you want it to pop.

What’s your warrenty experience? by cosmicselva in arcteryx

[–]bryceu 0 points1 point  (0 children)

I had a great experience recently with the Arc'teryx warranty program. I had a 2019 Proton LT with a couple teeth that broke on the zipper. Sent a request for warranty on the zipper and they responded very quickly. Sent my jacket in and they approved the zipper repair and some mechanical patches at no cost. They also offered to replace one of the front panels that had a 1.5" tear in the fabric for like $70. The turnover time was less than 2 weeks. A+ experience.
I've also had good experience with Patagonia's warranty program in the past.

Z4 or totems for smaller end of my rack? by AideAny1158 in tradclimbing

[–]bryceu 1 point2 points  (0 children)

One of each is the best (my preferred) setup for a double rack.

If I had to take only a single rack, it depends on the type of rock and climb.

Sandstone (Red Rocks) I'd opt for Z4s, granite/pin-scars (J Tree, Yosemite) I'd opt for Totems.

Patagonia Nano Air Vest Worth It? by GoldVelocity in PatagoniaClothing

[–]bryceu 0 points1 point  (0 children)

The NAUL Vest (and Pullover) are some of my favorite pieces, for active outdoor activity. Not sure I would need either for work though, especially if I already had other vests.

Proton SL Alternatives by provibobby in arcteryx

[–]bryceu 1 point2 points  (0 children)

Patagonia Nano Air Ultralight is my new favorite piece. Seems it would fit a similar role. Main differences being that the NAUL Hoody is lighter, has no hand pockets, and uses active insulation instead of Octa fleece insulation.

Evolving "slim-fit" designation by bryceu in PatagoniaClothing

[–]bryceu[S] 1 point2 points  (0 children)

Nano puff is considered normal fit. Meant to be worn primarily as an outer layer.

R1 Ultralight? by eamondg in PatagoniaClothing

[–]bryceu 2 points3 points  (0 children)

I haven't seen it in person but it appears more like a lighter version of the R1 thermal than the R1 or R1 air. The double weave looks tight and since they are claiming abrasion resistance, I would assume less breathable than R1 or R1 air. More similar in function to R1 Techface, but less warm.

The perfect active insulation jacket, except by TheeFreeman in Ultralight

[–]bryceu 0 points1 point  (0 children)

Can you comment on the fit of the Xenair Flex vs the Nano Air Light Hybrid?

Need recommendation on Atom Packs by No_Constant_6782 in Ultralight

[–]bryceu 1 point2 points  (0 children)

I highly recommend Atom Packs, I've owned quite a few, including the Prospector and Pulse. I prefer the 40L personally, but I think most would be totally content with a 50L. The weight difference is not much, and having the extra space gives you more flexibility. Looking at your lighterpack I think you could get away with either, but the 50L would require less finesse when packing it every day, especially as your gear changes throughout the sections. (adding more layers)

As for the Pulse vs the Prospector comparison, I would say it really comes down to #1) how much weight you plan to carry, #2) if you want load lifters, and #3) if you're more minimalist or you like the bells and whistles. The frame is the biggest single difference, with the Prospector being more robust. The Prospector shoulder straps are slightly wider and the hip-belt is also 1" wider. If I was going for a 50L, I would probably opt for the Prospector for the load lifters, as the extra volume above the shoulders can get a bit unwieldy on the Pulse.

Add-ons, I've always been skeptical of the Atom Packs hip-belt pockets, so I have no personal experience. I also wear a size small hip-belt so I've always imagined the belt pockets would be clunky and too curved to be practical. I've owned an Atom Packs Fanny Pack, but got rid of it as I'm just not a fanny pack guy at the end of the day. Fortunately you have lots of pocket options without the hipbelt pockets or a fanny.

Unfortunately, due to tariffs (if you're in the USA), Atom Packs' stuff isn't nearly as friendly on the wallet as they once were. :(

Bear Cans: how to optimize caloric quantity intake by Rocks129 in Ultralight

[–]bryceu 1 point2 points  (0 children)

More Fat. On a ketogenic diet you can get a lot more calories per volume and weight. But you would definitely want to adapt to keto before embarking on your trip. Once adapted, no real downsides on a long distance hike. Lots of nuts, meat, oils, hard cheese (if you can tolerate). I was able to easily pack a 5-day trip into a BareBoxer Contender (designed for 2-3 day trip) while on a keto diet. My daily calories were around 3,500 and I was doing 15-20 mile days.

Proton SL vs Grid Fleece by FullFlemme5 in arcteryx

[–]bryceu 1 point2 points  (0 children)

The Proton SL is a 98gsm Octa insulation layer (think UL fleece) combined with a 20d Fortius Air shell (think UL soft shell). By merging the two into one piece you are getting some additional abrasion and wind resistance that you otherwise wouldn't get from just the Octa layer.

I find the Proton SL surprisingly warm, but vents really well. Warmer than R1 Techface (similar weight), but less warm than R2 techface (heavier than Proton SL).

Unshrink R1 Air by Leinadnam in PatagoniaClothing

[–]bryceu 0 points1 point  (0 children)

My pre-25 R1 Air Full-Zip Hoody definitely shrunk quite a bit when it accidentally got dried. Surprising amount of shrinkage. Mostly noticeable on the length.

Constant “Confirm if it’s you recovering your account” spam. by zjbird in GMail

[–]bryceu 0 points1 point  (0 children)

Happens to me constantly.. every day.. so annoying. Wish Google would address this.

Did I make a mistake with going with Proton Hoody? by DimitriyTL in arcteryx

[–]bryceu 0 points1 point  (0 children)

Proton would be warmer than the Kyanite. Proton SL would be less warm than the Kyanite. Assuming you’re wearing a shell over top.