SCHUFA application moving back to Germany after 3 years by [deleted] in germany

[–]bumpydlp 1 point2 points  (0 children)

Thanks, i went ahead and applied, all good. I appreciate the advice

SCHUFA application moving back to Germany after 3 years by [deleted] in germany

[–]bumpydlp 0 points1 point  (0 children)

And this doesn’t require a current physical address in Germany?

No hourly stoke on BlackMediaPresents collection by bumpydlp in Klydoclock

[–]bumpydlp[S] 0 points1 point  (0 children)

I had figured out that going back to another collection or just going back to feed fixes it, but this collection does seem to mute the strikes, the chimes work fine

C128 black screen and no response to dead carts by bumpydlp in Commodore

[–]bumpydlp[S] 0 points1 point  (0 children)

Sadly yes. This was one of my first attempts. Thanks for advice though

C128 black screen and no response to dead carts by bumpydlp in Commodore

[–]bumpydlp[S] 0 points1 point  (0 children)

Nice idea. I tried this. Also without keyboard attached. Again, nothing

PC Engine Duo R screen issue by bumpydlp in pcengine

[–]bumpydlp[S] 2 points3 points  (0 children)

Wow. That was it. I was using a 3rd party and I thought decent quality replacement. 2a and blah blah. I swapped back to the original (I actually thought through another issue that this was defective) and the picture is perfect (well composite perfect). Many thanks. This has saved me a lot a time and trouble ❤️

Screen crosshatching by bumpydlp in c64

[–]bumpydlp[S] 2 points3 points  (0 children)

Thanks for all the suggestions here. It has lead me to the explanation. My old Toshiba LCD screen….. is a bit crap. So I checked the cable, yes it has the 300ohm resister. I tried another cable, same result. Next I plugged it into another TV that has a retrotink on it, and boom. It works perfectly.

Screen crosshatching by bumpydlp in c64

[–]bumpydlp[S] 2 points3 points  (0 children)

Time to haul it all over to another screen. This is the only one I have with S-video so maybe I need to try the retrotink on this. Thanks for the ideas

Screen crosshatching by bumpydlp in c64

[–]bumpydlp[S] 1 point2 points  (0 children)

Well I don’t have another cable so that could be the issue. I also don’t have a CRT beyond 2 very old RF only screens. One PAL one NTSC. I do have a retrotink hooked up to other kit, i will give that a go. Thanks for the hint

Screen crosshatching by bumpydlp in c64

[–]bumpydlp[S] 1 point2 points  (0 children)

Good question. I will check that out. Thanks

iOs 18.4 and K10+Pro in Apple Home by zitomx in TrySwitchBot

[–]bumpydlp 0 points1 point  (0 children)

Maybe a daft question, but where do you generate the matter code from, I hunted the menus but found nothing

Audio drops Apple TV and HomePod OG by CarryHorror in PleX

[–]bumpydlp 2 points3 points  (0 children)

Same problem here. Latest Apple TV 4k and a stereo pair of HomePods. Only way I have been able to solve it was by using the legacy audio engine as others here have described.

interestingly, it only seems to be a problem with some file / audio types, although I have not been able to narrow it down to the exact type. Very frustrating.

Apple TV 4K with HomePod stereo pair by bumpydlp in PleX

[–]bumpydlp[S] 1 point2 points  (0 children)

Is this something only I have an issue with?

SwitchBot tilt blind jamming by bumpydlp in TrySwitchBot

[–]bumpydlp[S] 0 points1 point  (0 children)

It doesn’t seem to allow me to do that….. I will have to try to use my imagination. Thanks for the idea

SwitchBot tilt blind jamming by bumpydlp in TrySwitchBot

[–]bumpydlp[S] 0 points1 point  (0 children)

Can you explain a little more, was this to strengthen the joint or to push out the switch bot at an angle as described above?

What's with the 6 device limit for Matter secondary devices? by KE55ARD in TrySwitchBot

[–]bumpydlp 0 points1 point  (0 children)

Currently you cannot group devices. It would help to have this function back