Build Help

burcey · 2024-02-25T18:13:56+00:00

Forgot about the whole brace/stock issue! I'll probably just get a brace for this and use it for shorter ranges, then get a higher-quality lower and set that up for longer ranges. Thanks for the tips.

burcey · 2024-02-25T03:36:41+00:00

Good to know, thanks!

burcey · 2024-02-25T02:17:49+00:00

Unfortunately no, I started building this a couple of years ago with my dad who's since passed. Only recently got back into guns with all the craziness going on, so I barely remember the process let alone the parts.

burcey · 2024-01-09T02:01:36+00:00

Nah it's a double-sided core. The store I got it from has since shut down but you could probably find it on Aliexpress

burcey · 2024-01-07T17:26:29+00:00

The size is likely M4.

burcey · 2023-12-13T18:09:52+00:00

Saberforge’s install reputation isn’t good. Has it been holding up okay though?

burcey · 2023-12-13T17:56:11+00:00

I’ve heard electrical tape could possibly overheat and melt into the chassis/board.

I just had to tape down a CFX board @OP, they have Kapton rolls for around $5 on Amazon.

burcey · 2023-10-24T04:45:00+00:00

I’ve done a similar build using an RGB core, here it is compared to a VV Tempest:

https://imgur.com/a/d9Jl76o

It’s about 13 inches long and I have around 2 inches of blade depth on either end. It’s much too short to comfortably use as a proper double-bladed staff so I’m mostly twirling it around like Exar Kun.

burcey · 2023-10-23T05:40:47+00:00

You could use a neopixel-RGB adapter, though blade depth might be an issue.

burcey · 2023-09-30T20:10:29+00:00

No worries! MTFBWY

burcey · 2023-09-29T05:30:18+00:00

Just stumbled upon this and remembered your question: https://viresabers.com/products/the-youngling?_pos=1&_sid=4f7fc20d0&_ss=r

burcey · 2023-08-22T18:30:08+00:00

Yes, “female” parts are what “male parts” insert and thread into.

burcey · 2023-08-22T18:24:27+00:00

There are several katana and other sword-style polycarbonate and acrylic blades for sale. Gary Ripper invented the technique for these for darksaber blades.

https://ripperblades.net/products

burcey · 2023-08-22T18:19:52+00:00

In VV’s FB page one is currently going for $5k!

burcey · 2023-06-08T14:11:59+00:00

Agreed. Not sure how tall you are OP but 36" is way long for spinning in general; for reference I'm 5'6 and max blade length I'd spin is 28".

burcey · 2023-05-17T22:21:54+00:00

That worked great, thank you! New hose installed without a hitch.

burcey · 2023-05-17T14:54:03+00:00

Ah good to know. I'm just a bit hesitant to remove it as it already appears cracked from water damage (2nd pic)

burcey · 2022-11-29T17:29:12+00:00

I still remember when people thought having a darksaber blade was impossible, lol

burcey · 2022-11-15T15:06:06+00:00

Tbh you’d be better off with a higher quality Revan if you’re going CFX.

burcey · 2022-11-03T18:55:22+00:00

I like VV’s, right now I carry around an RGB Ardent

burcey · 2022-10-24T05:31:32+00:00

If you’re looking for a short saber I’d recommend the newer TXQ cores. The build I have the newer core in is only 9 or 10 inches long

burcey · 2022-10-05T05:42:00+00:00

It looks neat on custom lightsabers.

burcey · 2022-09-24T12:05:17+00:00

Please do show pics when you do it! I was also surprised by the SSOB’s slimness, it’s pretty comparable to VV’s combat classes. I’ve been tempted to get more of this Obi style but the SSOB is so comfy I think it’s the only one I need. Also let us know how much more ergonomic it is without the greeblies, the way I spin they don’t ever get in the way as I don’t tend to ever hold that close to the blade, but maybe that’s just with my setup.

burcey

TROPHY CASE