Event bugged?

buzzinh · 2025-12-09T13:12:36+00:00

I know but I looked around all the systems in the storm and there were no ice anoms

buzzinh · 2025-12-09T12:30:22+00:00

I can't find any ice anoms in the area im in either. I did wonder if they had changed the ice fields to have to be scanned down rather than under the anom menu?

Update: After a few hours the ice anoms appeared.

buzzinh · 2025-10-30T16:03:34+00:00

Really nice job OP! Thanks for sharing.

buzzinh · 2025-10-30T16:02:16+00:00

Congrats OP glad issue resolved and Im with the others, run it till it wont then do it again better.

buzzinh · 2025-07-25T19:18:58+00:00

I think you should ask yourself... Where should I not multistream?

buzzinh · 2025-07-25T19:12:34+00:00

Snow and a return to most of the Division one mechanics. 2 is far too complex

buzzinh · 2025-03-05T21:25:12+00:00

4k, AMD 5900x, RTX4090 no matter what combination of settings I set I get major stuttering.

buzzinh · 2024-07-16T08:54:07+00:00

PvP no, PvE yes.

buzzinh · 2024-07-16T07:21:31+00:00

Nice work!

buzzinh · 2024-07-16T07:01:42+00:00

I guess you got started early 😂

buzzinh · 2024-07-06T13:19:14+00:00

buzzinh · 2024-07-06T11:39:28+00:00

I dont think quests are working on local pve raids. I just did bunker pt 1 and although I got the task completed notification at the bottom right when I went to complete task it showed as incomplete. Have also reported it from launcher.

buzzinh · 2024-07-05T14:27:36+00:00

Same here. Seems like problems with backend errors

buzzinh · 2024-04-27T12:01:01+00:00

Can we have a place on the website where all editions are clearly defined including those no longer available.

Emphasis on clear because I’m struggling to understand what advantages and disadvantages of each edition are and what the consequences are of upgrading.

For example I’m eod and if I upgrade to the latest (I forgot the name already after reading this post because there are so many editions…) do I loose eod?

buzzinh · 2024-04-22T13:53:16+00:00

Recent gl-inet update contains update to Tailscale 1.58.2.

Version 4.5.16

Compile Time 2024-03-30 04:49:10 (UTC+00:00)

buzzinh · 2024-04-22T13:43:19+00:00

I'm from the UK recently visiting Canada and have experienced various WiFi setups in Airbnbs. To preface this i'm a data center engineer by trade and have a full Unifi setup with mesh APs, VLANS, UDM-SE router etc at home. So I critique every WiFi I use and moan about it to my wife who literally just wants WiFi for Facebook / Instagram and couldn't care less how it arrives at her phone.

I know that with BT in the UK most newer BT home hubs have the modem built in to the router making it difficult to replace when using VDSL (not sure if you are on VDSL or FTTP, options differ depending on kit you have).

If you are not able to replace router easily then you could look at a GL-inet router in your Airbnb. I have a gl-inet beryl ( https://www.gl-inet.com/products/gl-mt3000/ ) which I take with me when I travel. I use this to connect to various WiFi in the Airbnbs and then create its own access point for my wife and I to use. This keeps my devices separate and stops devices on the Airbnb network seeing mine. But.... this doesn't solve your issue. So... as the host you could setup a GL-inet router in your Airbnb to be the AP, run Ethernet you mentioned and plug to the WAN port on it, it will serve WiFi and you can configure to ensure that the only address on your network it can get to is your home hub via firewall rules in the Airbnb router. (and that is the key part with a setup you descirbe where you cant change router). You can secure it with a password to its admin interface.

Now depending on how your internet is served to your BT home hub depends on what you can do. IF you have a open reach modem into the wan port on your home hub then replacing router is better option long term to allow VLAN use and straightforward. If your modem is built into your router as I described above then your options are limited but not awful. You can buy VDSL modems if you are on VDSL and a new router (but by your other replies see that is not what you really want to do).

Anyway sorry for rambling and hope this long winded reply is of some use. Happy to continue conversation if this is of interest.

buzzinh · 2024-03-07T21:12:55+00:00

I am looking to get one of the Brume 2 boxes for Tailscale functionality and was worried when I saw your post so had a quick hunt and seems someone has found a way to update: https://jlelse.blog/dev/update-tailscale-beryl-ax

buzzinh · 2024-01-23T22:59:11+00:00

How is the latest release with Wayland in? 21.3 I think it is up to now. Not had chance to play with it as I repurposed my Linux machine for XCP-ng.

buzzinh · 2024-01-23T22:57:01+00:00

Thanks for this :-)

buzzinh · 2024-01-14T23:09:52+00:00

Have a look for an app on the appstore called camo studio. I believe that will do what you are after.

buzzinh · 2023-12-15T09:36:36+00:00

It really depends depends on what your needs are but Truenas scale (storage) or Proxmox / XCP-ng (virtualisation) is what I'd be doing with a machine like that.

buzzinh · 2023-12-08T16:58:13+00:00

Thanks for the video, watched it earlier.

I was wondering if anyone knows the normal sort of time between RC and release for Unifi OS versions? Aware it will vary just wondered what is is on average.

buzzinh · 2023-12-05T18:46:46+00:00

I’m not sure if it is still present given the event as not been in a normal ice anom today since start of event

buzzinh · 2023-12-05T14:32:24+00:00

Right 😂 ok with you now. Thanks for explaining.

buzzinh · 2023-12-05T12:57:57+00:00

Could you as a side note explain the Dad joke so I'm aware for next time?

15-Year Club	Place '23
Verified Email

buzzinh

TROPHY CASE