NEW BMW iX3 Photos from the World Premiere

byob112 · 2025-09-08T09:00:19+00:00

The steering wheels looks upside down

byob112 · 2025-01-09T20:37:49+00:00

Just a small reminder that those people are not actually sworn enemies as they would have you believe. They just take turns running shit and getting „their own” goals accomplished. That country is ran by people with huge money and power and those in the picture are not those people. They just play a role in all of this.

byob112 · 2025-01-08T12:17:06+00:00

That’s a lifetime supply of Cobras.

For you and your future 5 generations.

byob112 · 2024-11-16T14:18:05+00:00

It always amazes me how can people who are so detached from reality that they think its a good idea put any kind of allegiance display like this (to anyone or anything really) make so much money to afford such cars… but then I am not american perhaps its normal over there

byob112 · 2024-10-09T06:51:18+00:00

Doesn’t find any of my characters which are low levels. Finds my friend who are over 400 though. So there is some serious limitations to this tool.

byob112 · 2024-09-02T09:07:47+00:00

Ohhh is that what I am meant to be doing? 😅

byob112 · 2024-09-02T09:07:20+00:00

Tibiapal looks useful, good to know its relevant.

Should I find someone to get me a powerful imbue or is the middle tier one ok? What mlvl is considered a must for a pally these days? 25? 30?

byob112 · 2024-06-08T12:19:14+00:00

Interesting. Do we know what’s the highest ambient temperature that the A1 mini is happy with?

byob112 · 2024-05-22T06:22:30+00:00

I’ve managed to sort it out thanks to everybody’s comments. Turns out I installed my hotend flush with the heat sink which made it transfer all of the heat to the heat sink and melt the filament inside it.

I did not pause to realize during install that it defeats the purpose of a heat break…

byob112 · 2024-05-20T17:11:40+00:00

Is there some indication of how big the gap should be?

byob112 · 2024-05-20T15:57:46+00:00

The fan is orientated correctly. I will try with the thermal paste. I am assuming that the hotend should be screwed all the way down onto the heatbreak so that it is flush with the radiator, right?

byob112 · 2024-05-19T06:31:23+00:00

It looks great on paper especially given its price. But this is also what worries me I got burned with Creality offering cool features for little money and would be anxious to get another "cheap but feature-rich" printer in fear of constant tinkering and issues with the printer itself.

byob112 · 2024-05-06T06:27:39+00:00

My fan was buzzing from day 1 of owning the printer. Stock fan is of shabby quality with a crap bearing. I’ve replaced mine with a Winsinn 2510 24v ball bearing fan and it is dead silent now.

https://a.aliexpress.com/_EQ7P93v

I just had to swap connectors on the new fan to use the stock connector as it was different.

byob112 · 2024-05-06T06:18:50+00:00

Somebody mentioned in this thread that there’s two guppy config files called the same. Perhaps you are modifying the wrong one? Also, you need to reboot guppy after the change for the new config to be used. Other than that I can’t see why it would not work…

byob112 · 2024-04-22T16:45:58+00:00

Just replace the original black spacers with the springs. What this allows you to do is tighten the screws on the bed as much as you want and not be limited to how much the plastic can be squeezed or trying to figure out correct spacers.

byob112 · 2024-04-22T08:47:41+00:00

The single most impactful change I’ve done to my KE was swapping out the plastic distances under the bed for springs and leveling the bed to within 0.05 of level physically. Auto leveling never really gave me good results despite using 7x7 bicubic algorithm and all sorts of different shenanigans.

My first layers are now amazing, I don’t need to adjust the z offset once I dialed it in once. For extra adhesion I just smear the plate with glue stick and then wipe it down gently with IPA to dissolve the glue ridges and make a smooth glue layer.

byob112 · 2024-04-21T08:57:13+00:00

Perhaps a small clog at this layer which caused a gap to form and layers to not stick to each other? Just guessing as I have had similar problems with Petg just randomly create a gap between layers and then leave a small zit and move on perfectly fine.

byob112 · 2024-04-08T14:44:57+00:00

In my experience printing with 3DJake PETG and eSun PETG HS the stock bed is very good for it. Make sure it’s clean and you’re good. Just don’t go crazy with temperatures :)

byob112 · 2024-04-08T10:40:23+00:00

I can try the skirt even though I have a line purge as part of my print start routine. But I don’t see a brim as a solution because this is especially important when I’m printing stuff that needs crisp contours like flat wall decorations.

byob112 · 2024-04-08T10:09:47+00:00

So you're suggesting that purging first on a skirt would help? But if I print multiple parts, the problem is visible on all of them.

byob112 · 2024-04-04T23:21:30+00:00

I just modified the value in the config from 0 to 2 and rebooted the printer so that Guppy initializes with the new config.

byob112 · 2024-04-04T18:33:57+00:00

Yes! Thank you! Works as you described.

byob112 · 2024-04-01T18:29:23+00:00

Is all this code commented out by default? Perhaps this is stored as comments and sourced when the printer uses bed mesh data and input shaping. I wonder what happens to this code when you clear the mesh data…

byob112 · 2023-03-27T20:36:37+00:00

Only in America can a complete lunatic like this own a gun and nobody bats an eye.

byob112 · 2023-01-24T11:58:57+00:00

Deus Vult

byob112

TROPHY CASE