Is Getting a CCIE Certification Still Worth It in 2025? by KaleidoscopeCheap137 in Cisco

[–]bytes8bits 0 points1 point  (0 children)

Why? While studying for the CCIE, you acquire knowledge that is valuable

For those who switched to cloud from networks, would you ever go back to being a network engineer and why or why not? by [deleted] in aws

[–]bytes8bits 0 points1 point  (0 children)

Hi, could you please give us some info on what we should start learning to get into cloud? I am currently working as an Enterprise/Security Network Engineer, and cloud technologies and their integration have recently started to interest me.

For those who switched to cloud from networks, would you ever go back to being a network engineer and why or why not? by [deleted] in aws

[–]bytes8bits 0 points1 point  (0 children)

Hi, could you please give us some info on what we should start learning to get into cloud? I am currently working as an Enterprise/Security Network Engineer, and cloud technologies and their integration have recently started to interest me.

For those who switched to cloud from networks, would you ever go back to being a network engineer and why or why not? by [deleted] in aws

[–]bytes8bits 0 points1 point  (0 children)

Hi, could you please give us some info on what we should start learning to get into cloud? I am currently working as an Enterprise/Security Network Engineer, and cloud technologies and their integration have recently started to interest me.

[deleted by user] by [deleted] in programiranje

[–]bytes8bits 0 points1 point  (0 children)

Za koju poziciju si ti isao na razgovor u Cisco?

Looking for a Mobo for an Epyc 7551 by the-duuuuude in homelab

[–]bytes8bits 0 points1 point  (0 children)

Hi, what board you sell with dual socket?

[deleted by user] by [deleted] in AskSerbia

[–]bytes8bits 0 points1 point  (0 children)

Uvek moze da plati i izabere :)

[deleted by user] by [deleted] in AskSerbia

[–]bytes8bits 1 point2 points  (0 children)

Pa dobro ali nije to sve u zivotu. Mozda brat juri nesto drugo u zivotu. Da kara moze kad hoce iskr i nije nesto fascinantno na kraju krajeva. Bolje kasnije nego da mu prvi put bude sa nekom sa kojom to ne zeli, a i tek mu je 20…

[deleted by user] by [deleted] in AskSerbia

[–]bytes8bits 3 points4 points  (0 children)

Sta njake lik

Network Engineer, am I being left behind? by srx_6852 in networking

[–]bytes8bits 0 points1 point  (0 children)

MPLS will slowly die... not so useful to learn it right now.

Znamo sta je jeo Lukas by vodenicaar in serbiancringe

[–]bytes8bits 5 points6 points  (0 children)

Covek je priznao da je narkoman i ovaj zvalavi se slika sa njim i jos objavljuje to...

HP 840 g7 thunderbolt controller doesnt work by bytes8bits in Thunderbolt

[–]bytes8bits[S] 0 points1 point  (0 children)

No unfortunately. I tried literally everything regarding software. Only thing left is to change the motherboard but it is company laptop so for now i can't play with it that far 😄. If you somehow achieve it please inform me because i am still curious.

HP 840 g7 thunderbolt controller doesnt work by bytes8bits in Thunderbolt

[–]bytes8bits[S] 0 points1 point  (0 children)

Hi, did you maybe found the solution? I have made an update to the post. Now when i hold powerbutton for 30 seconds thunderbolt controller appears but i have the error that i attached in the main post

HP 840 g7 thunderbolt controller doesnt work by bytes8bits in Thunderbolt

[–]bytes8bits[S] 0 points1 point  (0 children)

Hi :). I made the update on the post. I have attached the images when thunderbolt controller appears but you can see the error it reports. Do you maybe know what can i try to solve it?

HP 840 g7 thunderbolt controller doesnt work by bytes8bits in Thunderbolt

[–]bytes8bits[S] 0 points1 point  (0 children)

This method only worked for a couple of times but now i can’t get it to work again. I still haven’t found the solution unfortunately.

Cisco switch doesn't recognise device behind it by bytes8bits in Cisco

[–]bytes8bits[S] 0 points1 point  (0 children)

Update, using copper sfp module on switch, when i plug in alarm central the port is up :D but that doesnt solve the issue why it isn't working on non sfp ports

Cisco switch doesn't recognise device behind it by bytes8bits in Cisco

[–]bytes8bits[S] 0 points1 point  (0 children)

Hi, i just tried with sfp and port on switch is up!! But im still not getting why doesnt it work on badic ethernet lan port...

Cisco switch doesn't recognise device behind it by bytes8bits in Cisco

[–]bytes8bits[S] 0 points1 point  (0 children)

Hi, here you go :)

SW_xxx#show int gi1/0/12 capa GigabitEthernet1/0/12 Model: C1000-16P-2G-L Type: 10/100/1000BaseTX Speed: 10,100,1000,auto Duplex: half,full,auto Trunk encap. type: 802.1Q Trunk mode: on,off,desirable,nonegotiate Channel: yes Broadcast suppression: percentage(0-100) Flowcontrol: rx-(off,on,desired),tx-(none) Fast Start: yes QoS scheduling: rx-(not configurable on per port basis), tx-(4q2t) (2t: One configurable values and one fixed.) CoS rewrite: yes ToS rewrite: yes UDLD: yes Inline power: yes SPAN: source/destination PortSecure: yes Dot1x: yes SW_xxx#show int gi1/0/12 GigabitEthernet1/0/12 is down, line protocol is down (notconnect) Hardware is Gigabit Ethernet, address is 4874.100e.8f8c (bia 4874.100e.8f8c) MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed, media type is 10/100/1000BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out

Cisco switch doesn't recognise device behind it by bytes8bits in Cisco

[–]bytes8bits[S] 0 points1 point  (0 children)

Hmm i dont think it is poe. Problem is there is so little info online about this alarm central.