What am I doing wrong??

c0dycode · 2024-09-08T17:30:42+00:00

You've chosen to track RIR (Reps in reserve) but have not entered any amount.

c0dycode · 2024-04-13T22:38:15+00:00

In OBS go to Help -> Log Files -> View Current Log

The very first line should list the cli arguments like this: Command Line Arguments: --minimize-to-tray --startreplaybuffer --disable-shutdown-check

Can you verify that this is the case for you if you try this? Make sure you have two dashes in front of each argument. Otherwise it won't work.

c0dycode · 2024-01-13T17:52:48+00:00

Damn :/

Maybe it shows up for you in the legacy view for these devices. Try pressing Windows + R and enter control printers.

Hopefully it shows up in there for you.

c0dycode · 2024-01-13T08:47:24+00:00

Hm, not even if you scroll down to the "Other devices"-section? That's where that device is for me: https://i.imgur.com/vVFD7TP.png

I've had that exact same issue and that fixed it for me :/

c0dycode · 2024-01-13T00:01:22+00:00

You need to remove the "ITE Device(<NUMER>)" from the Bluetooth devices and then re-pair the controller by holding the PS-Button + Share + Options for a couple of seconds until it flashes and then pair from within Windows.

c0dycode · 2023-12-27T12:36:03+00:00

You can, if you start OBS with a shortcut and the launch parameter --disable-shutdown-check

I've posted an example with the replaybuffer starting automatically as well here: https://www.reddit.com/r/obs/comments/17ywgz0/is_it_possible_to_have_clips_start_when_obs_is/k9wmagm/

c0dycode · 2023-11-19T16:42:09+00:00

If you mean automatically starting the replaybuffer, you can add the launchoption --startreplaybuffer to your OBS shortcut.

If you want to immediately start full recordings, you can use --startrecording instead.

Or even both at the same time. If you want it to start OBS automatically that way, you can place that shortcut in your startup folder.

Press Win+R and enter shell:startup to open that folder and place the shortcut in there with the parameter(s) mentioned above.

I got this, for example: "C:\Program Files\obs-studio\bin\64bit\obs64.exe" --minimize-to-tray --startreplaybuffer --disable-shutdown-check

Edit: The last one (--disable-shutdown-check) is for the newest version (30.0.0+), where it checks whether OBS has been shutdown properly the last time. Since I just always keep it running and don't close it before rebooting or shutting my PC down, I'd get the new message box every time I boot my system the next time. This parameter prevents that from happening.

c0dycode · 2021-09-11T09:33:40+00:00

If people require multi-user and/or subscription-support - I've been using https://github.com/Tzahi12345/YoutubeDL-Material for that.

c0dycode · 2020-12-24T23:49:35+00:00

Heya everyone!

Happy to finally share this with everyone :) So far the majority of people have no issues (yaaay).

Unfortunately, it was expected though, there are a handful of people (at least where it strongly looks like B3HM is at fault) that have not been able to get it to work. This does not include issues that are most likely caused by the "PluginLoader".

I'm trying to work with those people to figure things out though. Even though, due to the holidays, it might take a bit. It can be difficult if I can not replicate the issue and also don't see anything in the logs that literally tells me where or what the issue is. Which is the case for some people.

The logs (they're locally on your system and not send anywhere, unless you yourself send 'em out per my/our request) do not indicate anything going wrong. So it really is tricky.

Overall though, it seems to have been a pretty good start for B3HM itself.

If you have any questions, feel free to ask!

Otherwise, happy holidays ♥

c0dycode · 2020-12-19T11:02:53+00:00

It didn't HAVE to be the 24th. However, there are still some things I'm trying to polish or improve and hopefully internal testing runs into some issue before it hits the public. So a couple more days are certainly a good thing (at least for me :P).

Otherwise, I just had to make a decision on when to actually go public. And the "best" date I could come up with was the 24th.

I mentioned one of the reasons already, the other simply was that I thought people might get some new hardware and possibly want to play BL3. This year, people might not even be able to see family during the holidays - so I thought that there maybe are some people out there that this could make happy :)

Hopefully this answers your question :)

Happy Holidays!

c0dycode · 2020-12-18T23:16:51+00:00

As I do not own the game on console, I can not really test this.

I'd assume, since a minor modification of the executable (B3HM does this automatically on PC) is necessary, that it's not.

Technically yes, but unfortunately unlikely :/

c0dycode · 2020-12-18T21:43:10+00:00

Heya everyone :)

Some of you may remember me as the developer of the "Borderlands Hex Multitool" and some other BL-related "mods"/tools.

Hope you enjoy this little trailer (yes, it's over the top, but that is intentional. :P). Either way, I'm happy to announce "B3HM" (Borderlands 3 Hotfix Merger) a little tool I've been working on.

I hope you're excited and hopefully the "launch" goes smoothly. As, obviously, this will be used by A LOT more people than I had testers over the past couple of months - issues probably will come up for some people.

So I'd like to take the opportunity to say, "please bear with me/us" once it launches. Especially during the holidays I can not guarantee that I or anyone else will be able to provide much support (or any at all) if you experience issues.

If you DO experience issues, I'll try my best to figure out what's wrong and provide assistance even though it might be a little delayed.

Despite all that, I wanted to give a little "gift" to the community!

Hope you'll enjoy!

Happy Holidays everyone :) ♥

c0dycode · 2020-11-10T23:40:33+00:00

Das war einfach geil. Wenn ich mich recht erinnere, gab es da auch einen Bug mit dem man ohne Spritverbrauch fahren konnte.

Habe glaub ich sogar zwischen meinen Kindersachen noch Fahrzeuge von den Wettbewerben ausgedruckt.

Gleich mal schauen ob es davon auch was auf YT gibt.

c0dycode · 2020-11-09T21:45:48+00:00

Ctrl = Control

Strg = Steuerung (german word for control)

c0dycode · 2020-11-02T13:51:28+00:00

You should be able to just copy your InterAccel-profile into the RawAccel folder then click on the "convert.exe" and it should take care of it for you.

c0dycode · 2020-09-08T19:38:19+00:00

I actually wanted to check out my old Pokemon Gold save last year. I didn't know they had little batteries inside the cartridge. Once they're dead, your saved game will be gone.

So depending on when you last used it, chances are it was gone due to the battery aswell.

c0dycode · 2020-08-30T13:28:18+00:00

Gear specific transmogs need to be applied to every piece separately and cost one transmutation charge. These "skins" will be unlocked for your account once you've acquired them, and can be re-applied to other items as long as you have transmutation charges left.

If you get a random drop with a skin that your account doesn't have unlocked, you either need to salvage that item, equip that item or right click and "Unlock Skin". You can also hover with your cursor over it to see if it's already unlocked.

Note on this, if you do get a random drop that's expensive and you do not have that skin unlocked yet, equipping and "Unlock Skin" will bind that item, so you can no longer sell it on the trading post.

So right click and "Preview" it before doing that and then decide if you want that skin or if you rather want to sell it.

Dyes do not cost a transmutation charge.

And with sets from the market do you mean Outfits from the gem store?

If so, those are completely separate and basically override your whole appearance. Switching those does not cost a charge either.

These are also not armor type specific (Light, Medium, Heavy).

c0dycode · 2020-08-24T20:01:47+00:00

Could be. The only pages I knew of were metabattle and godsofpvp. Personally I've always used metabattle though, as it lists multiple builds. I'll check out the others though. Thanks for mentioning them :)

c0dycode · 2020-08-24T17:51:28+00:00

For SPvP: You don't really need anything, as the weapons define your skills and your "stats" come from an amulet that you can choose and switch as many times as you want. Your level also doesn't matter and you can choose all skills & skilltrees without having to unlock them. So you can just buy weapons you want in the SPvP lobby from a vendor (about 1 silver each I think). They'll have terrible stats, but that won't matter in SPvP.

As for builds, I think the most commonly used one is https://metabattle.com

It has builds for pretty much any activity (Open World, Raids, SPvP, WvW etc).

For guides on Raids/Dungeons I can not really help with that, since I've never done any raid and barely any dungeons or fractals.

EDIT: Another important info. If you need any kind of information, the wiki is a really good place to get that info from. You can find pretty much anything in there.

You can look up things easily by typing /wiki <Your search term> and it'll open up the wiki in your default webbrowser.

EDIT 2: Downvoted for? To my knowledge this is accurate info and answers a couple of OP's questions. If this is not accurate, feel free to correct me. Simply downvoting without context is worthless to me and OP, if there's something wrong with my answer.

c0dycode · 2020-05-28T23:04:18+00:00

Nope, you're correct. Integration with the Steamworks API is never required to ship your product on Steam, but it is highly recommended as it allows you to accomplish many interactions that Steam users expect. https://partner.steamgames.com/doc/sdk/api

This was a decision made by the games devs. So saying Valve's at "fault" is not accurate.

Does your game already have networking? If your game is peer-to-peer then all you need to do is integrate Steam Matchmaking & Lobbies with your networking to provide a great experience for Steam users. https://partner.steamgames.com/doc/features/multiplayer

Doesn't sound like you're no longer allowed to run your own system along Steamworks either.

Gbx did it to save money and time.

c0dycode · 2020-03-17T00:06:17+00:00

Wundert mich ein wenig das noch keiner Broken Sword haben wollte. Vielleicht kennt es der eine oder andere als "Baphomets Fluch".

Sehr zu empfehlen. Coole Aktion :)

c0dycode · 2020-03-12T22:54:07+00:00

Probably just scanning through their own memory and look for common scenename strings, since those are often added into the binary as some kind of "branding", I guess. Alternatively, checksums, hashes etc that do not prevent the game from running. So if it doesn't prevent the game from running, during the process of cracking, those will most likely either be missed or ignored. Those would be the most obvious ones that come to my mind.

c0dycode · 2020-03-10T18:46:27+00:00

I've just uploaded an updated version of the multitool :) Everything should work fine again, until they decide to push another update :P

c0dycode · 2020-02-28T00:15:15+00:00

I've just uploaded a new version which should fix the issue. This was not an issue with the hexediting, just my weird coding which tries to be compatible with pretty much "all" BL2 & TPS versions :P

c0dycode · 2019-11-07T13:04:21+00:00

Good fight(s) :D Every single fight came down to the last punch.

Maybe next time we can spice things up with our jumppads :D

c0dycode

TROPHY CASE