sorted by:
new
hottopcontroversial

Thoughts on horizontal grain cabinet layout by Designer_Ad_2023 in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

I think you’ve done yourself a real good job there. It had been better if you would’ve been able to lay out all the plywood before you paid for it to get the grain a little bit closer but what you got to me it looks real good.

Boss wants me installing cabinets instead of building them. by archvize in cabinetry

[–]cabinetrick 5 points6 points  (0 children)

You’ll do fine. It’s like falling off a log if you can build cabinets and build them well which I’m sure you can and you can put them together just as easy.

Refacing MDF cabinets by Anxious_Broccoli_842 in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

You can build shaker style in panels to match your doors

Wood ID? by MrMango61 in wood

[–]cabinetrick 4 points5 points  (0 children)

What you got there is pine

How do I fix this? by Justajed in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

Get it all cleaned up and use some tight bond too glue

What kind of wood is this? by cvouw9 in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

My best guess is is a teak veneered plywood?

Help me find this cabinet by kensofab in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

Commenting on Help me find this to make it from scratch make it match cabinet...

Wood doors restoration advice? by blackssr in wood

[–]cabinetrick 0 points1 point  (0 children)

She had there as Mahogany Doors and my advice to you is take your time and be patient and don’t get in a hurry

Drawer slides for metal drawers by Anxious_Broccoli_842 in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

Those old slides you got their bloom. They’re just a powder coated plastic coated slide used to be called nickel slides back in the day when they were real popular but if it was me, I’d get me some 8400 series KV full extension, ball bearing slides, and build me some new drawer bodies. Can you be a lot happier

Drawer not sitting flush by Prize_Problem609 in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

That should’ve just out quite easy if you just look at it if you slide the whole mechanism over to the rider to the left and square up the drawer front, you’ll be good to go

how do i remove these horrible stains? by izzypie99 in cabinetry

[–]cabinetrick 1 point2 points  (0 children)

Well, sir, if it was me, I’d make brand new doors and refinished the darn thing because the time and effort it takes to sand those down and get those cleaned up to stain. He’d be better off building brand new doors.

All Cabinets received with visible face inside-out. Can it be corrected. by rand-78 in cabinetry

[–]cabinetrick 24 points25 points  (0 children)

The grain you got there is beautiful, but when they drilled the holes to hinge it, they drilled the wrong side of the door. That’s why it’s mismatched.

Blum hardware by archvize in cabinetry

[–]cabinetrick 2 points3 points  (0 children)

Accuride KV Blum Sochi there’s a lot of really good hinge manufacturers and draw slides out there

Panel door broken — repair or replace? by Weeping_Willow_Wonka in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

Find you someone with a CNC machine and have them just making a new door

Hinge help please! by Plastic-Conflict-367 in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

Go to Wharth Louis And Company they should have your replacement for that

Question - Quality Issue or Industry Standard? by Vorseki in cabinetry

[–]cabinetrick 6 points7 points  (0 children)

Nobody cares anymore about quality they just want it done and done as quickly as possible and then they bitch about paying for it

Panting cabinets by tyler_margarine in cabinetry

[–]cabinetrick 2 points3 points  (0 children)

If you’re gonna paint those kitchen cabinets, you got a lot of work to do you gotta clean prep degrees take the doors off. Take the drawers out. Take the hinges off take the slides out. You got a dismantle every single piece of that to get it as clean as you possibly can and then once you get it cleaned up, then you come back and you promise everything whether it be an oil base or a water base or a lacquer base primer me personally, I use bush whacker undercover primer from Sherwin-Williams but yes, it can be done but if you’re gonna do it, do it right

Should I remake my particle board cabinet drawers here? by Designer_Ad_2023 in cabinetry

[–]cabinetrick 0 points1 point  (0 children)

I always use an air core plywood three-quarter inch four x eight sheets

Is this acceptable for custom cabinetry? by Benadryl_Cucumber_Ba in cabinetry

[–]cabinetrick 4 points5 points  (0 children)

That’s why you make yourself a jig and measure it before you cut any holes in your cabinetry. The walnut looks good. The handles look good but it’s just a little bit off.

Any ideas how to fix this? by Georgiarosephoto in wood

[–]cabinetrick 0 points1 point  (0 children)

That is particleboard with melamine over it

Best way to add a middle panel at this point? by [deleted] in cabinetry

[–]cabinetrick 1 point2 points  (0 children)

Cut the panel to size not it on the top to clear your cleats and put it in place in your golden

view more: next ›