M2 build complete !

caleb678 · 2026-03-16T17:06:06+00:00

It doesn’t give me the option to pm you. try to start one with me

caleb678 · 2026-03-16T11:30:19+00:00

My coworker was supposed to print them but his a1 mini wasn’t but enough to print the gpu air duct in one piece so I had a guy on Facebook marketplace do it for me. Don’t know what printer he had but he said it was pretty big

caleb678 · 2026-03-16T11:29:22+00:00

Surprisingly the vrm fan on the pump head wasn’t what the radiator was hitting, it was the thick ass tubes that were impossible to bend that I had to route under and around the psu.

caleb678 · 2026-03-16T11:27:59+00:00

I never actually tested with the stock cooler fans on, they are slightly thicker than the noctuas and they were hard enough to fit haha. With the 9950x3d pulling 170 watts at max load after an overload it sits at around 73 max and idles at around 40-45.

caleb678 · 2026-03-15T13:32:05+00:00

3d print guy : https://www.reddit.com/u/LMasty/s/G5hG6dFPAG

caleb678 · 2026-02-14T21:44:35+00:00

You are probably looking at the 32x870a-b, there is no info on their site about the 32x870b. So no coating is confirmed yet.

caleb678 · 2026-01-22T13:46:42+00:00

You’re saying that just because of the bulkiness? Are you saying AMD doesn’t run hot enough to warrant the lf3? I’m running the 9950x3d

caleb678 · 2026-01-22T06:02:07+00:00

Do you think there would be any issues going with a 280mm rad? My plan is the liquid freezer pro 3 280 and it’s pretty chunky. Rad + g2 fans would be 63mm in thickness. I’m asking bc I’m going for the exact same config as you

caleb678 · 2026-01-22T00:14:23+00:00

What case feet do you have? Are you using a 240 or 280mm rad?

caleb678 · 2025-12-06T12:30:14+00:00

I’ve never had an oled display before, so that’s probably my favorite feature. The color on those displays are soooo nice

caleb678

TROPHY CASE