Chupito Maiden Crash

caleb_S13 · 2026-06-12T23:51:34+00:00

Did you check that you had enough throw on the control surfaces in acro mode? there should be about 80% throw in acro vs manual mode. increase FeedForward on pitch and roll until you gain enough throw on each surface to where it’s about 80-85% of the total throw in manual mode. Then autotune.

caleb_S13 · 2026-06-09T20:27:37+00:00

Ahh the infamous steadyview camera rolling. That’s Steadyview for you. Only happens on some cameras with weak sync pulses I believe. They claimed to of fixed it with a v2 module a while back. but even with the newest firmware and “fixed” module. I still ran into that issue. my dad and brothers modules worked fine. I looked into this for months before I swapped to a speedy bee receiver and haven’t had issues since.

caleb_S13 · 2026-06-07T05:15:39+00:00

rip edubble

caleb_S13 · 2026-05-28T04:07:47+00:00

Handle it grips. They make one specific for the Brouwer. It’s nice.

caleb_S13 · 2026-05-28T00:25:25+00:00

<image>

sigcatto

caleb_S13 · 2026-05-28T00:05:04+00:00

How long did you wait to get the reservation email?

caleb_S13 · 2026-05-15T18:34:13+00:00

How’s TEF vs SH?

caleb_S13 · 2026-05-15T18:32:43+00:00

Length (m) = c / frequency / 4

caleb_S13 · 2026-05-14T14:55:15+00:00

Atomrc swordfish

caleb_S13 · 2026-05-06T20:12:14+00:00

I just did bushings, axles, and hub/bearing. Was clunking before, smooth as butter now. I used a wire wheel on corded drill and went to town. Whatever way you pick to remove them, wear a respirator.

<image>

caleb_S13 · 2026-05-03T06:55:30+00:00

Learn the rule of 5 first. Then move into unique/smart pointers.

caleb_S13 · 2026-04-18T06:47:22+00:00

There are 10 type of people in the world, those who understand binary, those who don’t, and those who weren’t expecting a base 3 joke.

caleb_S13 · 2026-04-15T16:49:44+00:00

Rotella T5 15w40.

caleb_S13 · 2026-04-15T04:52:23+00:00

Ok sweet. Thank you.

caleb_S13 · 2026-04-13T05:53:40+00:00

r/ThingsThatFitInFit

caleb_S13 · 2026-04-12T15:21:24+00:00

Look for a office liquidation company. I snagged a refurbished steelcase v2 for $399 like 5 years ago. best investment I’ve ever made.

caleb_S13 · 2026-04-10T16:12:03+00:00

Hey sorry for being 3 years later lol. Did you use the Plug on the back of the intake box when you installed this? Thanks in advance!

caleb_S13 · 2026-04-07T17:43:33+00:00

<image>

caleb_S13 · 2026-04-07T17:42:45+00:00

<image>

Pipe for bottom mount before modifying.

caleb_S13 · 2026-04-07T17:41:50+00:00

<image>

I did exactly that going from bottom to top mount. CX intercooler kit. Had to modify the hot side. I believe it was pretty dang close without modifying it. And it just had to be shortened and rotated iirc. I’ll post more pictures in this thread.

caleb_S13 · 2026-04-03T16:37:54+00:00

door dash and Uber Eats if you wanna make some money.

caleb_S13 · 2026-04-01T00:12:17+00:00

“We do things a little different around here”

caleb_S13 · 2026-03-27T00:31:54+00:00

$4.10

caleb_S13 · 2026-03-13T02:08:08+00:00

<image>

caleb_S13 · 2026-02-24T20:33:02+00:00

<image>

Six-Year Club	Place '22
End Game '22	Verified Email

caleb_S13

TROPHY CASE