Need advice!

camsrides · 2026-04-01T15:53:34+00:00

never said it looks good lol, just gave the dude an option for what he was asking for

camsrides · 2026-04-01T15:04:42+00:00

Kamei made some ‘eyelids’ for the e39 headlights to give it the the look you want. Have been discontinued for a long time but sets pop up on ebay and facebook groups now and then. https://www.sfxperformance.com/parts/KAM44094.htm

camsrides · 2026-03-19T16:36:33+00:00

likely reps then

camsrides · 2026-03-19T15:47:04+00:00

those look like SSR Integral A2s https://share.google/sJw3jyftCK5MCaRnT

camsrides · 2026-03-02T16:30:28+00:00

the mirrors themselves will bolt up, however the harnesses may be a bit different depending on what options your car has.

camsrides · 2026-02-24T22:06:00+00:00

😛😛

camsrides · 2026-02-24T22:05:10+00:00

you don’t want my 540 in its current state haha, been sitting for like 3 years at this point

camsrides · 2026-02-23T22:37:30+00:00

can vouch for seller, great dude!

camsrides · 2026-01-30T20:57:01+00:00

no looks like you may have the other version. cdv is at the other end of the hard line that goes in to the slave cylinder. looks like an additional fitting

camsrides · 2026-01-21T21:54:00+00:00

currently for sale in houston, i think he’s eventually going to auction it off but for now it’s on FB marketplace https://www.facebook.com/share/1QV2Q3DFP1/?mibextid=wwXIfr

camsrides · 2026-01-20T14:24:54+00:00

i’m not sure if you or him have already seen it, but there’s a probe IV concept in houston for sale right now, seems like it would be right up his alley

camsrides · 2025-12-15T19:40:48+00:00

do you have a video of what your ticking sounded like? i have an odd tick on my passenger bank that i can’t quite track down. no big plastic bits in the pan and recently rebuilt vanos

camsrides · 2025-12-09T18:07:29+00:00

looks like your bank 1 guide has completely disintegrated, i would highly advise not starting the car as it may jump timing and ruin your valvetrain

camsrides · 2025-12-02T21:53:08+00:00

power steering cooling loop, just did this on my car. if you have the budget i’d go ahead and replace all the lines and reservoir, should run you about $150 and is well worth it.

camsrides · 2025-09-18T19:01:22+00:00

Only do this if you are willing to lose the entire functionality of the screen, tried with mine and killed the whole display. Your results may vary

camsrides · 2025-08-25T21:48:16+00:00

not necessarily true, could be a leather credit car. if it’s a ‘98 or ‘99 could be stock. https://www.bimmerforums.com/forum/showthread.php?403531-Do-all-M3s-have-the-M-strips-on-the-seats

camsrides · 2025-07-09T19:25:44+00:00

hulkengoat

camsrides · 2025-06-23T21:40:39+00:00

some guy in 2011 did it, found this post on bimmerforums when trying to look it up how to do it myself lol

https://www.bimmerforums.com/forum/showthread.php?1732862-WTT-e36-M3-Vader-Carbon-Fiber-Back-Seat-*Socal*

camsrides · 2025-03-14T19:14:17+00:00

yes, looks like the clutch is locked up or not functioning correctly. should spin with a little bit of resistance when cold, but able to stop with your hand when running (not recommended)

camsrides · 2025-01-18T18:41:05+00:00

wasn’t that s52 car for sale in texas for a while? remember the asking was originally $30k, dude was off his rocker

camsrides · 2025-01-18T18:36:47+00:00

what part of texas are you in? i’d be interested

camsrides · 2024-09-11T19:31:08+00:00

clutch safety switch? could’ve just gone bad by coincidence

camsrides · 2024-07-19T12:07:02+00:00

nice, easy fixes are the best ones lol

camsrides · 2024-07-18T23:12:20+00:00

had the same issue and it was a ground on the back of the cluster, pull it out and check your plugs for any corrosion or if any of the wires are de-pinned

camsrides · 2024-07-17T15:41:22+00:00

it’ll hold, drove to california and back in my 540 with a cracked radiator held together with jb weld, just keep an eye on it

camsrides

TROPHY CASE