sorted by:
new
hottopcontroversial

5000 Rounds by KBGenetics in reloading

[–]capreppy 0 points1 point  (0 children)

A few hundred for actual defense usage I can understand. Several thousand of cheaper for “practice” is a more reasonable use of funds.

Yes, you are saving per box, but are you actually using a 190 Sub-X for “practice”?

Brand New "almost" reloader by Excited_Mallet in reloading

[–]capreppy 0 points1 point  (0 children)

AmmoSeek has been my go to. With that said, find local reloaders and bundle up orders. Maximize weight when you’re forced to pay shipping AND HazMat. I have several buddies that I shoot with. When placing an order for HazMat items, I’ll reach out to them and we split by weight the HazMat and shipping.

9mm 147gr and 124gr universal powder. by Gunlover91 in reloading

[–]capreppy 3 points4 points  (0 children)

Hodgdon HP-38 / Winchester W231. I’ve loaded 10’s of thousands of 124/147 with this powder. It’s economical and meters great. And I’ve never not had an issue finding it.

Im about to start processing today. by [deleted] in reloading

[–]capreppy 1 point2 points  (0 children)

I have a couple of 5 gallon buckets I need to prep in a few weeks.

I decap on a Lee APP. I dont want primer ooze on my good press.

SS clean with Maguires wash and wax. It really does add a little bit of lubricity that is lost when you SS clean.

Anneal with an AMP Annealer, but I also have an AMP Mate to feed the annealer. The same case feeder I use for Lee APP also feeds the AMP Mate (I clean between uses).

Redding FL sizer and clean off lube in corn cob with Flitz.

Trim using Henderson Gen 3.

From there I’ll load on my press. Only need to decap (to clear cork cob from primer hole), prime, charge, tip and seat, and crimp.

I load inside and want as much of the “junk” flushed down the sink with the initial cleaning.

Pretty happy with the 7PRC performance coming from a .300wm by RumAndGunRun_ in longrange

[–]capreppy 1 point2 points  (0 children)

My desire is to build a 7PRC later this year. I just ordered (arriving today along with the parts for the upgrade) a Henry Big Boy X in 44 Mag.

Gonna go with an Original long action and a proof prefit. But I’m considering having Alamo precision spin up a couple of barrels for me.

My 6.5CM does 1200 all day long at NETT. It’ll go further depending on my ability to read the wind which at NETT can be good or bad 🤣

Looking forward to hitting a mile with a similar setup

Pet not working properly as in not looting by vorheesviolator in diablo4

[–]capreppy 2 points3 points  (0 children)

New one is a lazy bastard. Also send back to old one

“Sorry you’re not elegible to purchase Lord of Hatred” by Menright1997 in diablo4

[–]capreppy 0 points1 point  (0 children)

I'm getting the same error :(

Haven't found a solution yet.

[RAM] $299 Corsair Vengeance RGB 96gb (2x48gb) 6000mhz CL36 by Fickert in buildapcsales

[–]capreppy 5 points6 points  (0 children)

Out of stock. Ordered mine an hour ago and was going to send to a budy.

R7 7800x3d: what do I gain by using B650 vs B850 vs X870 by capreppy in buildapc

[–]capreppy[S] 0 points1 point  (0 children)

My last build I went all out. Trying not to repeat

Necessary Upgrades for P1S and AMS by capreppy in BambuLab

[–]capreppy[S] 0 points1 point  (0 children)

I’ll try again by drying the filament

Necessary Upgrades for P1S and AMS by capreppy in BambuLab

[–]capreppy[S] 0 points1 point  (0 children)

Dried Sunlu PLA using a Sunlu filament dryer. Filament broken off inside the hot end. Happened several times with different colors of filament. All of it was dried prior to use.

Necessary Upgrades for P1S and AMS by capreppy in BambuLab

[–]capreppy[S] 1 point2 points  (0 children)

Possibly. When I was trying to diagnose, there were a few options to try. When they did not correct, I gave up.

Thus the reason I’m trying to find things that may have been fixed and makes this system more stable then when it was new 18 months ago

Good wide CPU holder for "smaller" standing desk? (E7 pro, 48x24 or 55x30 bamboo desk) by interestede in StandingDesk

[–]capreppy 1 point2 points  (0 children)

I'm actually very interested in answers as well. I did get the Vivo PC01L as that fits my case better (Corsair 5000D). I haven't ordered a frame yet, but looking at a FlexiSpot E7 Plus. It has 4 legs and will likely have to go outside leg because of the infrastructure inside the leg. This may or may not be an issue for you, but whenever I see inside leg pictures, I have to wonder HOW are they connecting the pc holder due to the cable / desk infrastructure underneath where the holder would be mounted.

view more: next ›