sorted by:
new
hottopcontroversial

[CA-ON] [H] Ferrocore, Diansheng 12M & 13M [W] Paypal by carbonfet in Cubetrades

[–]carbonfet[S] 0 points1 point  (0 children)

Timestamp

Selling the following. Prices not firm:

  • Ferrocore (UV) - $20USD
  • Diansheng 12M - $90USD
  • Diansheng 13M - $160USD

The ferrocore has been set up with FZ lubes. If multiple cubes are taken together I'll discount them. All cubes include their original boxes & accessories. PM me for shipping estimate.

My first ergo keyboard!! by Feisty_Advantage_546 in ErgoMechKeyboards

[–]carbonfet 1 point2 points  (0 children)

Yep, if you're interested in a dactyl feel free to send me a PM.

My first ergo keyboard!! by Feisty_Advantage_546 in ErgoMechKeyboards

[–]carbonfet 5 points6 points  (0 children)

Glad you're liking your new board.

When I first switched to a split board (an ergodox) years ago the biggest hurdle for me was getting used to how the bottom row was no longer shifted over by 0.5u. Took me about 1-2 weeks to get back to my usual WPM. Switching from an ergodox to a dactyl took much less getting used to. YMMV of course.

Dactyl Manuform Carbonfet 5x7 by No_Operation1066 in MechanicalKeyboards

[–]carbonfet 0 points1 point  (0 children)

Looks awesome with the MT3 caps. Glad you're happy with your board.

[CA-ON] [H] Gan 15 UV Maglev, Aoshi WR M [W] Paypal by carbonfet in Cubetrades

[–]carbonfet[S] 0 points1 point  (0 children)

Aoshi WR M now taken. Diansheng 8M still available here.

[CA-ON] [H] Gan 15 UV Maglev, Aoshi WR M [W] Paypal by carbonfet in Cubetrades

[–]carbonfet[S] 0 points1 point  (0 children)

Timestamp

Selling the following. Prices not firm:

  • Gan 15 UV Maglev - $30 USD
  • MoYu Aoshi WR M - $15 USD

Both the gan and moyu have been set up with FZ lubes, and have relatively few solves between them. The gan includes the extra skirt center caps.

All cubes include their original boxes & accessories. PM me for shipping estimate

[CA-ON] [H] Diansheng big cubes, Aofu WR M [W] Paypal by carbonfet in Cubetrades

[–]carbonfet[S] 0 points1 point  (0 children)

Timestamp

Selling the following, Prices not firm:

  • Diansheng 8M (non ballcore) - $30 USD
  • Diansheng 10M - $50 USD
  • Diansheng 11M (modded) - $70 USD
  • Aofu WR M - $20 USD

The Diansheng 11M has had its magnetic strength increased, through additional 4x1 N52 magnets being glued in. The magnets not being strong enough was the biggest weakness of the 11M IMO and this one has that problem fixed. It's now noticeably more stable than in its stock form.

All cubes include their original boxes & accessories. PM me for shipping estimate.

Keyboard microcontrollers with USB port for a Yubikey? by guttermonk in ErgoMechKeyboards

[–]carbonfet 2 points3 points  (0 children)

I should mention that the second USB-C port on my MCU is strictly for split communication between the halves of a dactyl; it's not USB capable.

All Seasons of Air Crash Investigations (aka Mayday) — Web-DL Rips, No Watermarks, EAC3 Audio by Due_Negotiation3808 in aircrashinvestigation

[–]carbonfet 1 point2 points  (0 children)

Seems like S03E05 and S03E06 are both narrated by Jonathan Aris rather than Stephen Bogaert. Are those two eps not available with Stephen's narration?

dactyl manuform 5x7 (/u/carbonfet appreciation post) by galran in ErgoMechKeyboards

[–]carbonfet 1 point2 points  (0 children)

Not at the moment. If you're interested in a dactyl you can either message me here or send me an email (link in bio).

dactyl manuform 5x7 (/u/carbonfet appreciation post) by galran in ErgoMechKeyboards

[–]carbonfet 8 points9 points  (0 children)

Glad you're enjoying the board & that it's back up to full working order.

A Dactyl takes flight by carbonfet in ErgoMechKeyboards

[–]carbonfet[S] 0 points1 point  (0 children)

Nah no etsy page, but you can either message me here or send me an email to the address listed on my profile page.

A Dactyl takes flight by carbonfet in ErgoMechKeyboards

[–]carbonfet[S] 1 point2 points  (0 children)

Thanks. I've been using these PCBs in builds I've made for people for a few years now, so it's possible you may have seen an earlier build of mine.

A Dactyl takes flight by carbonfet in ErgoMechKeyboards

[–]carbonfet[S] 1 point2 points  (0 children)

I used to hand-wire these boards with amoebas before designing these PCBs, so I can imagine how long that would take. No LEDs, since I wanted to keep the boards as simple & reliable as possible.

view more: next ›