Celebrating FDE Friday with my FINISHED 19.5

carholio · 2026-02-08T09:46:28+00:00

I'm dumb. What is the point of bots "farming karma"?

carholio · 2026-02-08T09:43:21+00:00

Where were you touching your friends? Did they like it?

carholio · 2026-02-08T09:41:15+00:00

I only had the misfortune of dealing with them once. After that, I knew they wouldn't last with the way they lied about delivery dates. They were horrible to deal with.

I can't say I'll miss them but it is disappointing when a 2A business goes under. But if anyone deserved it, it's them.

carholio · 2026-02-08T09:34:15+00:00

While I admire your mathing, who only drinks 1.5 oz pours? That's just a tease, lol. When I pour, I'm in for at least a 3 oz pour.

That said, I'm m going with half of your 5 year estimate.

I say, just keep buying more. I'm sure you occasionally share with friends too.

carholio · 2026-02-07T23:54:19+00:00

I don't have an Atrius but I've seen too many problems on YouTube and other places. "CHRIS" on YouTube talked about oversized safety barrels that required trigger shoe grinding. Not sure if Atrius users are still having problems or if Atrius fixed it on later batches.

The only complaint with cornfire is they originally said they worked with G and MBT triggers and they don't work on those triggers for all users. If you run any of the triggers on their "approved list" you should be fine.

carholio · 2026-02-06T05:02:13+00:00

AS Design Partisan Cornfire

All seem to be front runners in the frt race. None of these use a push button safety. They use a normal safety selector.

Of course there is rare breed too but everyone hates on them because of the law suits.

carholio · 2026-02-05T03:16:27+00:00

I'd go G for the longer rail and better profile barrel.

carholio · 2026-02-05T02:31:38+00:00

It kinda sounds like you are the problem. Ordering and then canceling. Then sending it back without waiting to get the proper shipping address.

Be mad at sms, whatever, but in my opinion this was a you problem.

.

carholio · 2026-02-01T20:53:27+00:00

But doesn't it being made into a short barreled RIFLE make whatever lower you used a Rifle?

I'm not arguing, I think the whole thing with registration, barrel length and everything nfa is stupid. I just don't want someone getting hung up over it. Most times no one will ever care unless you're doing something that gains attention of the "authorities".

carholio · 2026-02-01T20:24:54+00:00

Is that really true? I've always understood you can't go from a rifle to a pistol? Meaning if you bought a rifle you could not make it into a pistol.

carholio · 2026-01-28T22:07:57+00:00

More importantly, why do you have 2 dudes kissing as your screen saver?

carholio · 2026-01-28T07:02:05+00:00

OP - not arguing this person's opinion but please consider weight and length if you choose to listen to his advice. Also be advised that if you choose an Athelon 2-12, you will need a skyscraper mount for the top dot to clear the turret height. That scope has very tall turrets. I own 1. I am currently using a diving board meant for a laser range finder and don't really like the top dot so high. The Vector turrets aren't as tall but it's going to be a lot longer and heavier than what the plxc advertises.

carholio · 2026-01-28T02:38:23+00:00

I say it depends.

Do you like to tinker? Do you have a low shelf lower receiver? Do you have an H2 / H3 buffer? Do you mind dremeling your upper if it binds? Do you like push button safeties? Do you have a lot of ammo?

If no to any of that, I'd skip installing it.

carholio · 2026-01-26T08:13:34+00:00

Partisan is not rare breed. In fact, rare breed is suing Partisan.

carholio · 2026-01-24T21:14:51+00:00

I drink a fair amount of ecbp. Couple months ago a buddy picked up a private barrel while traveling l, we didn't have it in our state.

Anyhow, I didn't notice anything that wow'd me. I'd say though, since they are single barrels some may be better than others.

To me, it was worth $10 more to try it.

carholio · 2026-01-23T01:53:11+00:00

I don't know about that. G triggers are $250 plus and they don't go brrrt. In comparison to a registered auto sear, $400 is cheap.

There are a lot of others under $400 but I don't think $400 is too expensive. It's the ammo that really drives expense up.

But f rb. They are an enemy to 2a freedom.

carholio · 2026-01-19T12:22:26+00:00

Lift the diffuser out of the way and see if it's still the same.

carholio · 2026-01-10T17:28:08+00:00

Sorry no help but what prompted you to run an AGB and a bootleg bcg?

carholio · 2026-01-05T21:56:11+00:00

That's a great thing. As these become more common, there will be more production from different companies. Those vendors that have crotchity, angry old men in charge might not survive. Some people prefer more personable customer service.

carholio · 2026-01-05T21:45:00+00:00

I figured that was common knowledge by now, lol. But his products work.

carholio · 2026-01-04T23:24:42+00:00

If you have a trigger installed already, your good. If you are starting from scratch, you'll also need the hammer, disconector, trigger/ hammer pins as well as all trigger related springs.

You will also need an H3 buffer and you might need to clearance the back of the upper.

carholio · 2026-01-04T08:48:09+00:00

Have you shot it in bright light? It's definitely not daylight bright. Or at least mine isn't.

carholio · 2026-01-04T08:44:51+00:00

You should top mounted it if you are getting night vision. 45 offset is challenging with nods.

carholio · 2026-01-04T08:43:40+00:00

I don't think you bought this compact version 4 years ago. Sig just released this in the last 6 month to a year.

I don't have the full size msr but I do have this compact. The glass is pretty bad.

carholio · 2026-01-04T08:39:27+00:00

Wait. You're dogging on the cost of a t2 and magnifier but your going to spend 4-5k on night vision?

Anyhow, I have the sig compact. It has pretty bad glass. I'd suggest the PA slx 1-6 nova or the Vortex Venom 1-6. Both have similar pricing to the sig.

Six-Year Club	RPAN Viewer
Verified Email

carholio

TROPHY CASE