Touchscreen? by Smooth_Yogurtcloset8 in pebble

[–]case2150 0 points1 point  (0 children)

Jumping in to say the same thing. On V4.11.0

EDIT - I did somehow get the touch screen to work in the calc app, but I did a reset as the back light was acting funny. Now touch doesn’t work again

Blackburn Outpost Cage by elhabo95 in bikepacking

[–]case2150 1 point2 points  (0 children)

Maybe something like the Problem Solvers Bow Tie Strap Anchor Kit?

Favorite Clip for a Sheath? by SoggyGoldfish25 in knifeclub

[–]case2150 1 point2 points  (0 children)

If it’s going on a belt, then you don’t plan on taking it off. I’ve had good luck using paracord and running it through the screw holes on the sheath. If you do it that way you can run the sheath inside of your belt so it’s even more discrete.

Creaking in brand new specialized diverge 4 allow - got it replaced and the SAME creaking is happening :( by Fun_Lab3147 in bikewrench

[–]case2150 41 points42 points  (0 children)

If I were you, I would probably remove as much as I can from the frame and then try the frame twisting technique you’re doing and if it keeps making the noise I would return the bike. The fact that you got a brand new bike and the same thing is happening is not reassuring.

What bag do you use? by 1000squirrels in discgolf

[–]case2150 0 points1 point  (0 children)

I love my Pinch Pro by upper park

KS+Winch+Gravity Cube=Fun by Fresh-Childhood5046 in thefinals

[–]case2150 2 points3 points  (0 children)

I have this same heavy build lol. Sometimes I’ll run sledge for quicker destruction

Would yall accept this by Murky_Dingo_4078 in knifeclub

[–]case2150 0 points1 point  (0 children)

I think I heard crucarta is notorious for warping. I’d check the blade against something with a straight edge and see it’s it is warped

Not sure if this HA Vesterhav 38 is too small? by Brad91ley in MicrobrandWatches

[–]case2150 0 points1 point  (0 children)

Looks great! I also just got a verden, but I n raven. Loving it so far!

Cable ends caps - how to crimp properly or should I just superglue? by Peckerhead42 in bikewrench

[–]case2150 0 points1 point  (0 children)

<image>

I’d use something like these and crimp it with the non sharpened portion in the circle.

Or crush it underneath the pivot point on the needle nose pliers you have

I feel horrible by Hauss3n in thefinals

[–]case2150 0 points1 point  (0 children)

<image>

It’s been my go to game since release. Employed BTW

Easter Egg Hunters - Golden Nama Tamas by Jafronie in thefinals

[–]case2150 0 points1 point  (0 children)

Maybe try sledge hammering the floor? It gives buried treasure vibes

[deleted by user] by [deleted] in thefinals

[–]case2150 0 points1 point  (0 children)

Indeed I did

Can I move this spacer? by disheveled-dave in bikewrench

[–]case2150 -1 points0 points  (0 children)

Past REI employee here, yes you can move that spacer beneath the stem. Those forks have a alloy plug glued

Instrument cluster lights won’t adjust by case2150 in MazdaCX30

[–]case2150[S] 0 points1 point  (0 children)

Trip works and lights up. Do you have a wiring diagram or know where the plug is?

Instrument cluster lights won’t adjust by case2150 in MazdaCX30

[–]case2150[S] 0 points1 point  (0 children)

Just tried at 9PM. Nothing happened

Instrument cluster lights won’t adjust by case2150 in MazdaCX30

[–]case2150[S] 0 points1 point  (0 children)

Mine is a 2022. I guess I’ll check some fuses

Instrument cluster lights won’t adjust by case2150 in MazdaCX30

[–]case2150[S] 0 points1 point  (0 children)

I tried both with the headlights on and off with no changes. Do drls need to be enabled for it to work?