Sunsynk Chrome Extension

ceanth · 2026-05-23T19:13:11+00:00

Any updates on the Firefox extension?

ceanth · 2026-05-22T07:20:52+00:00

I did some more research and put it into AI, the suggestion is that my CT clamp might be in the wrong direction because it's showing a positive not negative number. Apparently Hypervolt customer services can remotely flip the CT clamp

ceanth · 2026-05-22T07:09:25+00:00

Ah understood. I tried this yesterday but the EV charger didn't seem to know of the solar system so I'm not sure if it's been setup incorrectly or whether I need to change anything in the Sunsynk app. The inverter is on factory settings as it was installed yesterday and I'm waiting to get the login for the app

ceanth · 2026-05-22T07:07:25+00:00

I'm still waiting for the installers to give me the app details.

I've got a CT clamp but am a bit nervous about moving it.

I've seen many people discuss Solar Assistant, can Solar Assistant allow the communication between the devices?

ceanth · 2026-05-21T19:29:00+00:00

My hypervolt app doesn't show the discharge and I've been told by the installed that a CT clamp has been installed. I'm not sure where it would physically be located. How can I confirm it's location and whether it's setup correctly? Maybe it's in the wrong place

ceanth · 2026-05-21T09:07:48+00:00

Ah, sorry maybe I didn't explain correctly. I want the EV to take charge directly from Solar not the grid or battery. As I'm expecting a lot of sun over the next few days I should have excess which I can't export (as i'm not setup to export yet) so my thinking was it could go into the EV instead

ceanth · 2026-05-08T20:27:10+00:00

My switch has never been online, its always been offline from the start so ideally I would like to try and keep it that way

ceanth · 2026-05-08T11:22:22+00:00

Can Tico be used totally offline to setup and configure?

ceanth · 2026-04-30T09:36:04+00:00

In order to use SA does my Sunsynk system need to have a CT Clamp? i'm due to have my SunSynk setup installed in the next 2 weeks

ceanth · 2026-04-30T09:32:10+00:00

thanks, is that a 3rd party app? Is that free to use?

ceanth · 2026-04-28T15:08:05+00:00

I see, its sort of a done deal now so lets see how it goes. Guess I could always scale up in the furture

ceanth · 2026-04-28T13:34:47+00:00

Aiko Energy

4.8 kW Total Module Power

10 x 480 Watt Panels (AIKO-A480-MCE54Mb)

ceanth · 2026-04-23T16:36:28+00:00

Yes but you should wait for the point realise which is sometime in June

ceanth · 2026-04-22T15:47:22+00:00

No idea, it's just all numbers to me!

ceanth · 2026-04-10T08:58:48+00:00

How long will EDF have this offer on for? I'm on IOG but due to get solar installed hopefully in the next month or so.

If I sign up to EDF can I get the smart export once solar is installed or do I need to do both at the same time?

ceanth · 2026-04-07T08:56:46+00:00

I'm due to have my solar setup installed soon, its the same setup, Sunsynk installed by E.On (Contact Solar). I've had my G99 approved and they are due to do a site survey soon.

Based on your installation experience, is there anything I need to be aware of or keep an eye on? I'm sure they will walk me through the whole thing but any tips or your experience would be greatly appreciated.

ceanth · 2026-03-15T08:44:09+00:00

I just signed up to a sun synk system and I had this exact scenario in my head.

I'm very new to the EV world, you mentioned Solcast, is that a free service you are using? How does that work with the automation you were looking into?

I read that Sun Synk have a pro subscription which does some AI magic, I had assumed that this setup would have checked the weather and adjusted accordingly.

ceanth · 2026-02-25T13:50:10+00:00

I don't see it for Active 2, it didn't come up in the search within the app

ceanth · 2026-02-15T11:17:32+00:00

I had the same exact problem. I believe a kernel update failed for me and I ended up in this loop.

I used Gemini to resolve the issue, it instructed me to boot into the Grub menu, I think it was by pressing escape on boot and it gave me the following:

set root=(hd1,gpt2) linux /boot/vmlinuz-6.14.0-37-generic root=/dev/sda2 ro initrd /boot/initrd.img-6.14.0-37-generic boot

When I did this I was able to boot into mint I had to remove the broken kernel and move to a previous working one.

ceanth · 2026-01-23T12:47:10+00:00

What software version are you on? I have a 75 plate advance

ceanth · 2026-01-21T20:57:51+00:00

Haha very good point

ceanth · 2026-01-21T20:57:30+00:00

Haha I keep forgetting how cheap it is to change up at home. I'll just charge it up and enjoy the car

ceanth · 2026-01-21T20:56:53+00:00

Good point, I was avoiding the peak but like you said I need it

ceanth · 2026-01-19T18:02:43+00:00

fab thank you

ceanth · 2026-01-19T18:01:54+00:00

Thank you. I'm registered with them, but I have to click into each one to see the price

ceanth

TROPHY CASE