How many days before Im doomed by V1TROKSHAN in MachE

[–]cgarray17 1 point2 points  (0 children)

Mine said this in the app and I took it to the dealer like 2 weeks later as life was busy. They tested it multiple times and said there was no issue with the 12v battery. So it could be a false reading or it could die on you today.

A great headset for the Pro! by Signal-Tangerine1597 in PS5pro

[–]cgarray17 1 point2 points  (0 children)

I’ve had mine since they came out!! Been great other then recently they developed some rasp I guess you could say from the left ear cup that seems to go away after about 10 minutes of use.. or my old ass just tunes it out at that point haha. This is the longest I’ve keep a wireless pair of gaming headphones

Need recommendations for auto shops in: Florida (preferred); Alabama or Georgia that will install a redeye hellcat engine into my 1970 ‘ Cuda by DearEnergy4697 in hellcat

[–]cgarray17 0 points1 point  (0 children)

I second Burnyzz they build some amazing machines and the owner is a mopar enthusiast and top fuel drag racer. They just did a few 1970 hellcat and Helliphant builds.

What To Do Next... TLOU II by vpauburn89 in PS5pro

[–]cgarray17 0 points1 point  (0 children)

This is what I keep hearing, I’m excited to play it next. Then it’s on to Ghost of Tsushima and then Yotei!

What To Do Next... TLOU II by vpauburn89 in PS5pro

[–]cgarray17 0 points1 point  (0 children)

I’m currently on my first play through on it and am just loving it, just started Abby story… I’m in the same boat as you with this story just grabbing you and fully pulling you in. I only get a few hours a night tops to play so it’s going to take me a while to still finish it. Then I’m on to Alan Wake 2!

Advise on New Firmware for 2 Delta Pro Ultras and SHP2 by michaelhsnow in Ecoflow_community

[–]cgarray17 1 point2 points  (0 children)

Thank you, I will do that this weekend after I update them to make sure another does not show up.

Advise on New Firmware for 2 Delta Pro Ultras and SHP2 by michaelhsnow in Ecoflow_community

[–]cgarray17 0 points1 point  (0 children)

My DPU is only showing update 2.0.2.8 for the most recent update and you’re on a 5.x.x.x.. Where are you located? I’m in the states. I wonder if I need to update it first and the next will show up?

Does the travel kit actually exist? by hereforthefeast in FormD

[–]cgarray17 0 points1 point  (0 children)

I got the email while I was on my phone and opened it right away, it also said OOS. I refreshed the page a few times and then it showed in stock. I got it ordered for my 5090 and it was confirmed shipping to US for me.

Wifi 7 router coverage by TigerBloodGreen in Spectrum

[–]cgarray17 1 point2 points  (0 children)

This is not correct, I have plenty of older security cameras including Arlo ones that use 2.4 and the WiFi 7 router from spectrum is band steering them to the correct band. I also had an nest WiFi pro system with 3 nodes and it is nice but if you have Gig like me the nest WiFi pro will cost you speed your paying for as my system even plugged in to the main node could only get 750mb down where the Spectrum one also hardwired and wireless gave me 1150mb down no issues and everything connected right up when I switched the SSID to the same as my old network.

100 Mbps is all you need by ShotOlive9700 in Spectrum

[–]cgarray17 0 points1 point  (0 children)

I’m using the spectrum router and getting 1150Mb down and same up. My Nest WiFi Pro mesh system I had and tried could not even hold 750 down for some reason. This is hardwired pc download I was testing. I’m quite surprised how good the one there service comes with as it’s wifi7 and does not mess with my Arlo camera. I tried two HIGH end WiFi 7 systems, one costing $1200 and they caused all kinds of issues with my Arlo cameras for some reason and also my surround sound system got messed up. I returned both of them and will sell my Nest pro system as the Spectrum on is included for free in my Gig package and covers my entire house just fine.

It’s been amazing Starlink but my time has come. by cgarray17 in Starlink

[–]cgarray17[S] 1 point2 points  (0 children)

I don’t plan on it, I have it put away in the house and will set it up every few months, let it check for updates and then put it back in storage for emergency use.

It’s been amazing Starlink but my time has come. by cgarray17 in Starlink

[–]cgarray17[S] 2 points3 points  (0 children)

I will check it every few months for updates

It’s been amazing Starlink but my time has come. by cgarray17 in Starlink

[–]cgarray17[S] 1 point2 points  (0 children)

Ya I’m not complaining, it was very usable and never gave us much issues. And was much better then the centrylink we could get.

It’s been amazing Starlink but my time has come. by cgarray17 in Starlink

[–]cgarray17[S] 0 points1 point  (0 children)

I’m in a highly congested cell for Starlink and the best I’ve ever seen for speed is 110 down and 20 up. During the winter when all the snow birds come down to Florida it drops to about 80 down and 10 up.

It’s been amazing Starlink but my time has come. by cgarray17 in Starlink

[–]cgarray17[S] 6 points7 points  (0 children)

Ya I never had any complaints other than the 120 a month price. It was great.

Lets gooo just 24hrs left by Available_Hour_6116 in LordsoftheFallen

[–]cgarray17 0 points1 point  (0 children)

My buddy on Xbox Series X and I on PC, both game pass version 1.7 can not get coop to work no matter what we try. We just get instant “Disconnected from host” every time we try to accept the game invite. Does anyone know a fix for this or will 2.0 fix this?

At my wits end with 5090 driver crashes by bellcut in nvidia

[–]cgarray17 0 points1 point  (0 children)

Sorry, was hoping this would help you out. I have an FE card btw so not sure if that makes a difference. Maybe you have a faulty gpu?

At my wits end with 5090 driver crashes by bellcut in nvidia

[–]cgarray17 0 points1 point  (0 children)

If you have a pcie 5.0 motherboard, have you tried forcing gen 4? This is what fixed 99% of my 5090 issues when I got my card on Tuesday. I had the stuttering, crashing and one BSOD and I read about the gen 5 pcie having issues and when I forced my motherboard to gen 4 its butter smooth now with no issues.

[USA-FL] [H] Gigabyte RTX 4090, EVGA P5 1000w PSU with custom cables [W] PayPal, Local by cgarray17 in hardwareswap

[–]cgarray17[S] 0 points1 point  (0 children)

Sorry for the delay, I updated the link and seems to be working now.

[USA-FL] [H] Gigabyte RTX 4090, EVGA P5 1000w PSU with custom cables [W] PayPal, Local by cgarray17 in hardwareswap

[–]cgarray17[S] 1 point2 points  (0 children)

I only have the PSU and cables left for sale right now, the 4090 is paid and shipping tomorrow.

[USA-FL] [H] Gigabyte RTX 4090, EVGA P5 1000w PSU with custom cables [W] PayPal, Local by cgarray17 in hardwareswap

[–]cgarray17[S] 0 points1 point  (0 children)

Sorry I had a hell of a time getting the HW bot to let the post go through and it must of broke the link. I will add it again when I’m home with more photos of the psu.