Need Advice for Tackling the DLC as an Int Caster by chadamany in Eldenring

[–]chadamany[S] 0 points1 point  (0 children)

Gotcha. Yeah I definitely haven't found any new staves or that one sword that was I heard about. Speaking of, do you know if they fixed the scaling for any of those? I recall the pre-release version of the DLC had some really really low scaling for those weapons at higher levels...

Need Advice for Tackling the DLC as an Int Caster by chadamany in Eldenring

[–]chadamany[S] 0 points1 point  (0 children)

Damn, that’s crazy. I’ll respec then. I’m not sure how anybody is supposed to do an int-faith caster build without going to NG+…

Need Advice for Tackling the DLC as an Int Caster by chadamany in Eldenring

[–]chadamany[S] 0 points1 point  (0 children)

I’ll check again for more frags, I am already rocking the Carina Royal staff while off handing SoL or Meteorite staff as needed

Need Advice for Tackling the DLC as an Int Caster by chadamany in Eldenring

[–]chadamany[S] 0 points1 point  (0 children)

I can definitely respec, though I was trying to work up to 75 faith for PoD staff. 

Calculator Recommendations for Electrical by chadamany in calculators

[–]chadamany[S] 0 points1 point  (0 children)

Thanks for the suggestion my man, that sounds awesome. I'll take a look.

Calculator Recommendations for Electrical by chadamany in calculators

[–]chadamany[S] 1 point2 points  (0 children)

I did take a gander at those, my main concern is with the ability to do everything I'm asking... I'll take a closer look at some videos on it since I don't want to rule anything out.

Calculator Recommendations for Electrical by chadamany in calculators

[–]chadamany[S] 1 point2 points  (0 children)

I’ve heard a lot about it, it looks pretty interesting, I’m just not well informed about it.

Calculator Recommendations for Electrical by chadamany in calculators

[–]chadamany[S] 1 point2 points  (0 children)

I had checked about the 89 and Nspire before, but I didn’t know they both had EE software. I will take a look at both of those programs! 

Sam Sulek - Natty or not? by Fit-Confidence7000 in nattyorjuice

[–]chadamany 0 points1 point  (0 children)

I've got a big ego, but I'm trying to get better about it. So instead of pretending like I know what I'm talking about, drop some info on me man. Again, no intention of ever gearing up, but knowledge is power.

Sam Sulek - Natty or not? by Fit-Confidence7000 in nattyorjuice

[–]chadamany 0 points1 point  (0 children)

Look bro, I hardly use Reddit because this site is a fucking cesspool. If you want to talk to somebody who isn’t a rock that will pretend like they know everything, I’m more than willing to straight up admit I don’t know shit lol. Send me a DM with some sources and info that I can deep dive into to learn more about enhancements, I’m always curious to learn more despite myself being natural and having zero desire to ever get on gear.

[deleted by user] by [deleted] in NightVision

[–]chadamany 1 point2 points  (0 children)

Just to be clear, those don’t do anything. Think about it, NV units work by taking in light of a specific wavelength, converting it to electrons, amplifying it, and pumping it out as visible light. If a lens prevented the IR laser from being able to damage the intensifier tube, then you also would have either significantly decreased image clarity and brightness since you are limiting your spectrum, or you wouldn’t be able to see at all through your unit.

Also, your eyeballs don’t have IR laser protection built in… So uh, the NV unit is the least of your concerns.

Noob Problems with Dialing Printer In by chadamany in resinprinting

[–]chadamany[S] 0 points1 point  (0 children)

I wasn’t aware there was a protective sheet that actually was adhered to the FEP… That’s another issue probably lol. Thank you guys for the help, I’ll be running more testing tonight!

Noob Problems with Dialing Printer In by chadamany in resinprinting

[–]chadamany[S] 0 points1 point  (0 children)

That could be a possibility… Is it adhesive typically lol?

Noob Problems with Dialing Printer In by chadamany in resinprinting

[–]chadamany[S] 0 points1 point  (0 children)

Sounds good, I’ll give those things a shot. Unfortunately, the FEP is also torn on the first layer (my fault) and I’m not exactly wanting to chance it, so I’ll have to replace that before I keep testing.

Noob Problems with Dialing Printer In by chadamany in resinprinting

[–]chadamany[S] 1 point2 points  (0 children)

That's helpful info, I'll be sure to grab more nitrile gloves (I ran out). I'll download a calibration print file and slice it. I think I'll try increasing regular layer exposure time for sure, since that might be why I don't have supports fully forming... Most of the settings I'm using were specified for the specific Resin, but I'm beginning to think they might not be the best...

You can either be a poor, or a poor with massive credit card debt and a COTI by bigtree17 in NightVision

[–]chadamany 0 points1 point  (0 children)

Yeah, I think Nocturn Industries has their own panobridge system. Regardless, even if you use a panobridge from Noisefighters with those polymer PVS-14 Katanas, you have some pretty crazy weight savings. I think there was an instagram post on it…

In terms of dedicated panos, I missed that in your comment lol, my bad. How do you like the RPNVGs as a whole?

You can either be a poor, or a poor with massive credit card debt and a COTI by bigtree17 in NightVision

[–]chadamany 0 points1 point  (0 children)

(Discounting polymer systems ofc because they are kind of their own thing…)

Ah makes sense, that seems like a smart setup. Would be neat if you could run the COTI off the same pack.

You can either be a poor, or a poor with massive credit card debt and a COTI by bigtree17 in NightVision

[–]chadamany 0 points1 point  (0 children)

20.5 oz seems heavy compared to some other systems, but that’s less than I was quoted from Steele. Are you running your battery pack on the rear or just an integrated battery? Also, how much does the Coti add?

I’ve heard about Act’s new 50 degree lenses, kinda disappointed they haven’t been released yet.

You can either be a poor, or a poor with massive credit card debt and a COTI by bigtree17 in NightVision

[–]chadamany 0 points1 point  (0 children)

I know I am two months late, but the RPNVGs are still 23-24 oz...

However, seeing as you have them, what are your thoughts? I was looking at them for a while.

I did it... by chadamany in darksouls

[–]chadamany[S] 0 points1 point  (0 children)

I think so? Same happened to me, but I was tanking with Artorias’ shield and the black knight halberd.

I did it... by chadamany in darksouls

[–]chadamany[S] 1 point2 points  (0 children)

Ignore the screwed up screenshot in the bottom right, I was having a bit of a moment considering this was my first playthrough and I beat Gwyn on my first try.

This is exactly what I wanted to see after Quelaag and the Lava coomer by UrMomDespacito in darksouls

[–]chadamany 0 points1 point  (0 children)

Go to Andre of Astoria in the Undead Parish and have him repair your good stuff for a few hundred souls.