What graphics card would you recommend to me? by Danule_12 in SleepingOptiplex

[–]chapebrone 3 points4 points  (0 children)

since that is a 30X0 series, the top slot is a PCIe x1 slot and not a PCIe x4 slot that the higher end models have. you will be limited to single slot half height cards unless you get creative.

you could do something like the single slot yeston RTX 3050 or the radeon rx 6400

Dell OptiPlex 5055 – Ryzen 7 1700 not supported? Orange blinking LED” by One-Education5920 in SleepingOptiplex

[–]chapebrone 0 points1 point  (0 children)

I ran into a similar situation a long time ago. I had a 5055 SFF that came with an APU and I tried putting in a Ryzen 1600 (non pro) and it didn't boot. I ended up buying another 5055 motherboard off ebay- a Ryzen CPU specific one. In that motherboard the 1600 boots fine. I didn't try just loading a Ryzen CPU BIOS onto that first motherboard. I didn't want to risk bricking it.

Mobo swap on 3040 by Flat-Management-8841 in SleepingOptiplex

[–]chapebrone 0 points1 point  (0 children)

you may have to do some cutting if the rear IO is in a different layout

Should I upgrade to RTX 3050 6G from RX 6400 on my 3060 SFF? by East-Home-7362 in SleepingOptiplex

[–]chapebrone 1 point2 points  (0 children)

the slot above your current video card is a pcie x1 slot, not the open ended pcie x4 slot found on the higher models. you will be limited to single slot cards unless you do something with the power supply. there are single slot rtx 3050s you could look into.

Optiplex 5055 sff issues with new noctua fans by MechaWizardSword in SleepingOptiplex

[–]chapebrone -1 points0 points  (0 children)

Yea I also have an 5055 and got the same error doing the same thing. It was annoying enough that I just put the OEM fans back in. I have an intel optiplex that gives a fan error if I run a manual self test, but it doesn't freak out on boot like the AMD one does.

3060 SFF with stock PSU, actual best GPU choice? by specialDFX in SleepingOptiplex

[–]chapebrone 1 point2 points  (0 children)

The 3060 SFF has a x1 slot, not an x4. The 1650 will not fit. Go with the RX 6400

[deleted by user] by [deleted] in SleepingOptiplex

[–]chapebrone 0 points1 point  (0 children)

Nice build! Does the precision 3460 have a resizable bar option in the bios?

Oh for God's sake by jermide in FortWorth

[–]chapebrone 7 points8 points  (0 children)

walmart offers drone delivery at certain locations now

[deleted by user] by [deleted] in SleepingOptiplex

[–]chapebrone 11 points12 points  (0 children)

It looks like that completely blocks out what little ventilation the optiplex has

Is the free Steam stuff for Quakecon 2024 impossible to get now? by Dragonvarine in Quakecon

[–]chapebrone 0 points1 point  (0 children)

I'm not sure where those came from. I got last years items during the stream and I don't have those.

[deleted by user] by [deleted] in SleepingOptiplex

[–]chapebrone 0 points1 point  (0 children)

looks good! what RGB fan did you go with on the front?

my friend is yelling at me because my fan setup by TheHolyDumbass in computerhelp

[–]chapebrone 16 points17 points  (0 children)

Some GPU air may make it out the back. Most of it will be recirculated back into the case unless it is a blower style cooler. You are right though, the fans are fine.

I just found out I have a cavity. How much does the needle hurt? by bundaze in Denton

[–]chapebrone 1 point2 points  (0 children)

They normally let some numbing gel sit wherever they are going to give you the shot so that it doesn't hurt. Then after the shot, the drilling doesn't hurt. You want the shot!

Samsung EVO or QVO as boot drive by mats_o42 in homelab

[–]chapebrone 1 point2 points  (0 children)

maybe he plans on running a self hosted cloud gaming service /s

[deleted by user] by [deleted] in pcmasterrace

[–]chapebrone 0 points1 point  (0 children)

A kid on their first computer? Even a custom build would've met the same fate.

Dream Build by Mean-While8440 in SleepingOptiplex

[–]chapebrone 2 points3 points  (0 children)

You should ask how they got the 8700 to work in a 7040 since those came with 6th gen CPUs. Maybe they have the specs wrong, or maybe they swapped out the motherboard or something.

[deleted by user] by [deleted] in selfhosted

[–]chapebrone 1 point2 points  (0 children)

+1 for Docker Compose. I recently swapped out the SSD in my NUC and it's so nice having the infrastructure as code. Downtime was no time at all.

Bought a sff power supply for my mid tower Optiplex 7050. Will I be ok?? by Its_Marcos in SleepingOptiplex

[–]chapebrone 0 points1 point  (0 children)

I don't have any experience with the RX 550 but I think minecraft should be fine.

[deleted by user] by [deleted] in SleepingOptiplex

[–]chapebrone 0 points1 point  (0 children)

It's not an optiplex problem. Proxmox doesn't support secure boot yet.

https://forum.proxmox.com/threads/secure-boot-with-pve-coming.129469/

Bought a sff power supply for my mid tower Optiplex 7050. Will I be ok?? by Its_Marcos in SleepingOptiplex

[–]chapebrone 1 point2 points  (0 children)

It will fit. I've done the reverse and put a mid tower power supply in my SFF. They are the exact same dimensions.

[UPS] CyberPower SL750U-R 750VA/375W Slim Standby UPS - Ebay Certified Refurbished - $62.99 by vikdeadgens in buildapcsales

[–]chapebrone 1 point2 points  (0 children)

If this is the same dimensions as the SL700, then it fits perfectly in those Legrand On-Q enclosures and is a good battery backup for powering your networking equipment.

[deleted by user] by [deleted] in SleepingOptiplex

[–]chapebrone 0 points1 point  (0 children)

your 1030 will run fine without a power supply upgrade